High strain rate torsional behavior of an ultrahigh carbon steel (1.8 Pct C-1.6 Pct Al) at elevated temperature

1997 ◽  
Vol 28 (9) ◽  
pp. 1913-1920 ◽  
Author(s):  
Manuel Carsi ◽  
Oscar A. Ruano ◽  
Felix Peñalba ◽  
Qleg D. Sherby
Keyword(s):  
Elevated Temperature ◽  
Carbon Steel ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Ultrahigh Carbon Steel ◽  
Torsional Behavior

scholarly journals High Strain Rate - High Strain Response of an Ultrahigh Carbon Steel Containing 1.3% C and 3% Si

2003 ◽  
Vol 426-432 ◽  
pp. 841-846 ◽  
Author(s):  
Donald R. Lesueur ◽  
C.K. Syn ◽  
Oleg D. Sherby ◽  
Dong Wha Kum
Keyword(s):  
Carbon Steel ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Strain Response ◽  
Ultrahigh Carbon Steel

High-strain-rate superplasticity in ultrahigh-carbon steel containing 10 wt.% Al (UHCS-10Al)

1996 ◽  
Vol 34 (12) ◽  
pp. 1919-1923 ◽  
Author(s):  
Eric M. Taleff ◽  
Mamoru Nagao ◽  
Kenji Higashi ◽  
Oleg D. Sherby
Keyword(s):  
Carbon Steel ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Ultrahigh Carbon Steel

High-Strain-Rate Superplasticity of Big Grains in Spray Forming Ultrahigh Carbon Steel Contain 1.6wt.%Al(UHCS-1.6Al)

2012 ◽  
Vol 535-537 ◽  
pp. 639-642 ◽  
Author(s):  
Jun Wang ◽  
Hai Sheng Shi ◽  
Jing Guo Zhang
Keyword(s):  
Carbon Steel ◽  
High Strain Rate ◽  
Strain Rate ◽  
Grain Boundaries ◽  
High Strain ◽  
Spray Forming ◽  
Growing Up ◽  
Ultrahigh Carbon Steel

Abstract: Spray forming UHCS-1.6Al material has a refined equiaxed pearlitic structure, which was necessary for high-train-rate superplasticity. During deformation, the cementite particles pin the grain boundaries and prevent the grains growing up. As a result it exhibited excellent high-strain-rate superplasticity, with a peak ductility of 187% occurring at a strain rate of 5*10-3s-1.

High Strain Rate Mechanical Properties of SAC-Q With Sustained Elevated Temperature Storage at 100 °C

2020 ◽  
Vol 142 (4) ◽  
Author(s):  
Pradeep Lall ◽  
Vishal Mehta ◽  
Jeff Suhling ◽  
David Locker
Keyword(s):  
Elevated Temperature ◽  
High Strain Rate ◽  
Strain Rate ◽  
High Strain ◽  
Strain Rates ◽  
Electronic Components ◽  
High Aging Temperature ◽  
Fine Pitch ◽  
Duration Of Storage ◽  
Operating Temperatures

Abstract Leadfree electronics in harsh environments often may be exposed to elevated temperature for the duration of storage, transport, and usage in addition to high strain rate triggering loads during drop-impact, vibration, and shock. These electronic components may get exposed to high strain rates of 1 to 100 s−1 and operating temperatures up to 200 °C in critical surroundings. Doped SAC solder alloys such as SAC-Q are being considered for use in fine-pitch electronic components. SAC-Q consists of Sn-Ag-Cu alloy in addition to Bi (SAC+Bi). Prior data presented to date for lead-free solders, such as SAC-Q alloy, at high aging temperature and high strain rate are for 50 °C sustained exposure. In this paper, the effect of sustained exposure to temperature of 100 °C on high strain rate properties of SAC-Q is studied. Thermally aged SAC-Q samples at 100 °C have been tested at a range of strain rates including 10, 35, 50, and 75 s−1 and operating temperatures ranging from 25 °C up to 200 °C. Stress–strain curves are established for the given range of strain rates and operating temperatures. Also, the computed experimental results and data have been fitted to the Anand viscoplasticity model for SAC-Q for comparison.

Sign in / Sign up

Export Citation Format

Share Document