Dry Sliding Wear Behavior of Hafnium-Based Bulk Metallic Glass at Room and Elevated Temperatures

2016 ◽  
Vol 25 (9) ◽  
pp. 3931-3937 ◽  
Author(s):  
Anup Kumar Keshri ◽  
Lovish Behl ◽  
Debrupa Lahiri ◽  
George S. Dulikravich ◽  
Arvind Agarwal
Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1735 ◽  
Author(s):  
Liang Li ◽  
Jihe Feng ◽  
Ce Liang ◽  
Jian An

Dry sliding wear behavior of Mg97Zn1Y2 alloy was investigated at test temperatures of 50–200 °C under three sliding speeds of 0.8 m/s, 3.0 m/s and 4.0 m/s. The wear mechanisms in mild and severe wear regimes were identified by examination of morphologies and compositions of worn surfaces using scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDS), and from which wear transition maps under different sliding speeds were constructed on rectangular coordinate systems with applied load versus test temperature axes. It is found that under each sliding speed condition, mild–severe transition load decreases almost linearly within the test temperature range of 50 °C to 200 °C. Microstructure observation and hardness measurement in subsurfaces identify that the softening effect generating form dynamic crystallization (DRX) is the dominant mechanism for the mild–severe wear transition at elevated temperatures. The mild–severe wear transition at 50–200 °C follows the contact surface DRX temperature criterion, and the transition loads can be well evaluated using the criterion.


2020 ◽  
Vol 62 (2) ◽  
pp. 189-195 ◽  
Author(s):  
Fatih Koçyiğit ◽  
Fethullah Yıldız ◽  
M. Sabri Gök ◽  
Vedat Veli Çay

2011 ◽  
Vol 675-677 ◽  
pp. 189-192 ◽  
Author(s):  
Jatin Bhatt ◽  
Sundaram Kumar ◽  
B.S. Murty

Based on the thermodynamic and topological approach, Cu60Zr30Ti10 has been identified as the best bulk metallic glass forming composition in Cu-Zr-Ti system. Bulk metallic glass has been successfully produced using mechanical alloying of elemental blends and consolidation of the resulting glassy powders into pellets of 8 mm diameter. Dry sliding wear of glassy pellets at different annealed states showed that the relaxed metallic glass has excellent wear resistance.


2020 ◽  
Vol 61 (12) ◽  
pp. 2263-2269
Author(s):  
Yong Lian ◽  
Wen Gao ◽  
Chao Zhao ◽  
Minyu Ma ◽  
Jinfeng Huang ◽  
...  

2017 ◽  
Vol 328 ◽  
pp. 54-62 ◽  
Author(s):  
Mustafa Sabri Gök ◽  
Yılmaz Küçük ◽  
Azmi Erdoğan ◽  
Mecit Öge ◽  
Erdoğan Kanca ◽  
...  

China Foundry ◽  
2020 ◽  
Vol 17 (6) ◽  
pp. 455-463
Author(s):  
Chao-zhi Li ◽  
Bin-guo Fu ◽  
Tian-shun Dong ◽  
Jin-hai Liu ◽  
Ying-jun Song ◽  
...  

2016 ◽  
Vol 58 (7-8) ◽  
pp. 640-643 ◽  
Author(s):  
Ilyas Istif ◽  
Mehmet Tunc Tuncel

Sign in / Sign up

Export Citation Format

Share Document