Short-Crack Growth Behavior in Additively Manufactured AlSi10Mg Alloy

Author(s):  
Robert K. Rhein ◽  
Qianying Shi ◽  
Srinivasan Arjun Tekalur ◽  
J. Wayne Jones ◽  
Jason W. Carroll
2019 ◽  
Vol 751 ◽  
pp. 351-362 ◽  
Author(s):  
M. Hassanipour ◽  
S. Watanabe ◽  
K. Hirayama ◽  
H. Li ◽  
H. Toda ◽  
...  

Author(s):  
Choongmoo Shim ◽  
Yoichi Takeda ◽  
Tetsuo Shoji

Environmental correction factor (Fen) is one of the parameters to evaluate the effect of a pressurized high temperature water environment. It has been reported that Fen for stainless steel saturates at a very low strain rate. However, the relationship between environmentally assisted fatigue (EAF) and stress corrosion cracking (SCC) is still unclear. The aim of this study is to investigate the short crack growth behavior and possible continuity of EAF and SCC at very low strain rates. Short crack initiation and propagation have similar behaviors, which retard the crack growth between 100–200 μm in depth. We find that the striation spacing correlates well with the maximum crack growth rate (CGR) data. Based on the correlation, it is clarified that the local CGR on an intergranular facet was faster than that on a transgranular facet. Furthermore, the overall maximum and average CGR from the EAF data is well interpreted and compared with the SCC data.


2013 ◽  
Vol 2013 (0) ◽  
pp. 33-34
Author(s):  
Shinnosuke HORIKAWA ◽  
Masaki TAKAHASHI ◽  
Masanobu KUBOTA ◽  
Takanori KATO ◽  
Taizo MAKINO

2018 ◽  
Vol 2018 (0) ◽  
pp. OS0110
Author(s):  
Meysam HASSANIPOUR ◽  
Shinta WATANABE ◽  
Han Li ◽  
Kyosuke HIRAYAMA ◽  
Hiroyuki TODA ◽  
...  

2013 ◽  
Vol 592-593 ◽  
pp. 753-756
Author(s):  
Ashok Kumar ◽  
Kalyan Kumar Ray

The effect of bainite content on the short crack growth behavior of three ferrite bainite dual phase steels has been examined using a rotating bending machine together with examinations of the microstructural constituents associated with the fatigue crack path. The magnitude of ΔKthsc for ferrite bainite dual phase steels, in general, is found to increase with increasing amount of bainite. Critical examinations of the crack paths indicate that it is inter-granular for steels with < 70% bainite while it is intra-granular for steels containing > 70% bainite.


2014 ◽  
Vol 2014.67 (0) ◽  
pp. _416-1_-_416-2_
Author(s):  
Masaki TAKAHASHI ◽  
Shinnosuke HORIKAWA ◽  
Masanobu KUBOTA ◽  
Takanori KATO ◽  
Taizo MAKINO

Sign in / Sign up

Export Citation Format

Share Document