scholarly journals Simulation of dielectric and resonance and anti-resonance data using modified Lorentz equation (T and $$\omega $$ ω simultaneously) of relaxor ferroelectric and piezoelectric ceramics

2019 ◽  
Vol 42 (2) ◽  
Author(s):  
S Mahboob ◽  
Rizwana ◽  
G Prasad ◽  
G S Kumar
2020 ◽  
Vol 8 (11) ◽  
pp. 3655-3662 ◽  
Author(s):  
Guanhua Song ◽  
Zhibin Liu ◽  
Faqiang Zhang ◽  
Feng Liu ◽  
Yan Gu ◽  
...  

Property diagrams of BNT–BT–KNN ceramics were obtained through a high-throughput method and the rhombohedral–relaxor ferroelectric transition led to high strain.


Author(s):  
T. Egami ◽  
H. D. Rosenfeld ◽  
S. Teslic

Relaxor ferroelectrics, such as Pb(Mg1/3Nb2/3)O3 (PMN) or (Pb·88La ·12)(Zr·65Ti·35)O3 (PLZT), show diffuse ferroelectric transition which depends upon frequency of the a.c. field. In spite of their wide use in various applications details of their atomic structure and the mechanism of relaxor ferroelectric transition are not sufficiently understood. While their crystallographic structure is cubic perovskite, ABO3, their thermal factors (apparent amplitude of thermal vibration) is quite large, suggesting local displacive disorder due to heterovalent ion mixing. Electron microscopy suggests nano-scale structural as well as chemical inhomogeneity.We have studied the atomic structure of these solids by pulsed neutron scattering using the atomic pair-distribution analysis. The measurements were made at the Intense Pulsed Neutron Source (IPNS) of Argonne National Laboratory. Pulsed neutrons are produced by a pulsed proton beam accelerated to 750 MeV hitting a uranium target at a rate of 30 Hz. Even after moderation by a liquid methane moderator high flux of epithermal neutrons with energies ranging up to few eV’s remain.


1998 ◽  
Vol 08 (PR9) ◽  
pp. Pr9-261-Pr9-264
Author(s):  
M. Tyunina ◽  
J. Levoska ◽  
A. Sternberg ◽  
V. Zauls ◽  
M. Kundzinsh ◽  
...  

1972 ◽  
Vol 33 (C2) ◽  
pp. C2-243-C2-245
Author(s):  
V. V. KLIMOV ◽  
O. S. DIDKOVSKAJA ◽  
G. E. SAVENKOVA ◽  
Ju. N. VENEVTSEV

2010 ◽  
Vol 130 (5) ◽  
pp. 844-851 ◽  
Author(s):  
Yosuke Kurihara ◽  
Kosuke Masuyama ◽  
Testuo Nakamura ◽  
Takeshi Bamba ◽  
Kajiro Watanabe

Author(s):  
A.N. Sagredos ◽  
R. Moser

AbstractBased on previous work (7) a method to simultaneously determine vamidothion [I], vamidothion-sulfoxide [II] and vamidothion sulfone [III] in tobacco has been developed. The compounds are extracted with water/acetone/acetic acid from the tobacco, cleansed over an aluminium oxide column and then determined on the gas chromatograph with the specific sulphur detector. Rates of recovery are 70 % - 92 %, the determination level is 0.1 ppm. Mass spectrometry and nuclear magnetic resonance data of vamidothion [I], vamidothion-sulfoxide [ II ] and vamidothion-sulfone [III] are given.


2012 ◽  
Vol 27 (3) ◽  
pp. 271-276
Author(s):  
Cui-Min LU ◽  
Qing-Suo LIU ◽  
Jian-Bo ZUO ◽  
Qing-Chi SUN

Sign in / Sign up

Export Citation Format

Share Document