DESIGN OF COMBINED VARIABLE STRUCTURE SYSTEMS AND REFERENCE EQUATION SYSTEM ALGORITHMS

Author(s):  
A.A. Stotsky
Author(s):  
K A Edge ◽  
F Gomes de Almeida

A new approach to adaptive control of manipulators is presented in this paper. The proposed controller for each individual axis is of the model reference type, designed through the use of variable structure systems theory. A novel feature of the controller is the introduction of a series-parallel model of the model-following error. The use of this model ensures system stability even if the manipulator design parameters or payload bounds are exceeded. Chattering of the system, associated with variable structure systems, is eliminated by arranging for the control objective to be physically achievable.


Author(s):  
Heejin Lee ◽  

In this paper, a new scheme is presented for the accurate tracking control of the second-order variable structure systems using the variable boundary layer. Up to now, variable structure controller(VSC) applying the variable boundary layer did not remove chattering from an arbitrary initial state of the system trajectory because VSC has used the fixed sliding surface. But, by using the linear time-varying sliding surfaces, the scheme has the robustness against chattering from all states. The suggested method can be applied to the second-order nonlinear systems with parameter uncertainty and extraneous disturbances, and have better tracking performance than the conventional method.To demonstrate the advantages of the proposed algorithm, it is applied to a two-link manipulator.


1991 ◽  
Vol 22 (8) ◽  
pp. 1477-1494
Author(s):  
HEBERTT SIRA-RAMIREZ ◽  
MARCO TULIO PRADA-RIZZO ◽  
PABLO LISCHINSKY-ARENAS

2000 ◽  
Vol 122 (4) ◽  
pp. 632-640 ◽  
Author(s):  
M. Onder Efe ◽  
Okyay Kaynak ◽  
Xinghuo Yu

Noise rejection, handling the difficulties coming from the mathematical representation of the system under investigation and alleviation of structural or unstructural uncertainties constitute prime challenges that are frequently encountered in the practice of systems and control engineering. Designing a controller has primarily the aim of achieving the tracking precision as well as a degree of robustness against the difficulties stated. From this point of view, variable structure systems theory offer well formulated solutions to such ill-posed problems containing uncertainty and imprecision. In this paper, a simple controller structure is discussed. The architecture is known as Adaptive Linear Element (ADALINE) in the framework of neural computing. The parameters of the controller evolve dynamically in time such that a sliding motion is obtained. The inner sliding motion concerns the establishment of a sliding mode in controller parameters, which aims to minimize the error on the controller outputs. The outer sliding motion is designed for the plant. The algorithm discussed drives the error on the output of the controller toward zero learning error level, and the state tracking error vector of the plant is driven toward the origin of the phase space simultaneously. The paper gives the analysis of the equivalence between the two sliding motions and demonstrates the performance of the algorithm on a three degrees of freedom, anthropoid robotic manipulator. In order to clarify the performance of the scheme, together with the dynamic complexity of the plant, the adverse effects of observation noise and nonzero initial conditions are studied. [S0022-0434(00)01704-4]


Sign in / Sign up

Export Citation Format

Share Document