Computational modelling of cementless cup fixation in total hip arthroplasty (THA)

Author(s):  
Abdessalam Jakobi ◽  
Christian Schulze ◽  
Carmen Zietz ◽  
Robert Souffrant ◽  
Rainer Bader ◽  
...  
2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Hou-Tsung Chen ◽  
Cheng-Ta Wu ◽  
Tsan-Wen Huang ◽  
Hsin-Nung Shih ◽  
Jun-Wen Wang ◽  
...  

Using morselized and structural allograft to restore bone stock for massive acetabular bone defect in revision total hip arthroplasty (THA) is an appealing procedure. However, concerns about inability to achieve long-term stability following allograft resorption remained. From 2003 to 2012, 59 hips in 58 patients undergoing revision THA for Paprosky type II or III acetabular defects were retrospectively reviewed. The acetabular defects were managed with deep-frozen morselized and structural allografts, and a press-fit cementless cup along with supplementary screws. Clinical outcomes and radiographic results were analyzed with a mean follow-up of 8.7 years. The clinical successful rate was 100% for hips with Paprosky type II defect, 95.2% for IIIA defect, and 92.8% for IIIB defect. Three hips with type III defect failed at 4, 7, and 9 years, respectively. Harris Hip Score improved significantly from 60.1 preoperatively to 91.3 at the latest follow-up. All hips with good clinical results showed trabecular bridging in the allograft-host bone interface. Deep-frozen structural and morselized allograft in combination with a press-fit cementless cup represented a viable option to reconstruct acetabular defects in revision THA.


2001 ◽  
Vol 25 (5) ◽  
pp. 286-289 ◽  
Author(s):  
D. Spicer ◽  
L. Schaper ◽  
D. Pomeroy ◽  
W. Badenhausen ◽  
J. Curry ◽  
...  

2021 ◽  
Author(s):  
Petri Bellova ◽  
Fiona Koch ◽  
Maik Stiehler ◽  
Albrecht Hartmann ◽  
Hagen Fritzsche ◽  
...  

Abstract Background:The “cup-in-cup” technique allows for revision of failed total hip arthroplasty (THA) when the cementless cup is well fixed. Furthermore, it can be used for liner wear or mechanical failure where liner replacement may be impossible or impractical. Recently, the “cup-in-cup” technique in combination with dual mobility cups (DMC) has drawn increased attention. Our aim was to report on the clinical and radiographic outcomes following this surgery.Methods:From 2015 to 2020, 33 patients treated with the DMC- “cup in cup” technique were retrospectively reviewed. Fourteen patients had died while 19 were available for the final follow-up (FU), of which 15 underwent both a radiograph and a FU visit, 2 underwent a radiograph only and 2 underwent a telephone interview only. Patient-related outcome measures included the HHS and the WOMAC. Radiographs were assessed for implant loosening and positioning. Primary endpoint was revision of any cause and secondary endpoint was loosening of the DMC at the latest FU. The survival analysis was conducted using the Kaplan-Meier method. Results:The mean age at surgery was 78.6±7.1 (63-93) years and the mean surgery duration was 124.4±52.0 (60-245) minutes. Recurrent dislocation (42.4%), periprosthetic fracture (39.4%) and polyethylene wear (6.1%) were the most frequent reasons for surgery. The mean FU duration (n=19) was 28.5±17.3 (3-64) months. The mean HHS score at FU was 59.4±22.2 (29-91) and the mean WOMAC score was 59.7±25.6 (15.6-93.8). Two cups were revised due to instability and one revision was performed due to periprosthetic joint infection, accounting for an overall cup survival rate of 86.8% after a mean FU of 22.9±18.0 (1.5-64.6) months. The survival rate free of loosening was 90.9% after a mean FU of 22.3±18.5 (1.5-64.7) months.Conclusions:We found that the cementation of a DMC in a well-fixed cup is a promising short- to mid-term treatment addressing THA instability especially in elderly and frail patients, who benefit from a reduced operation time. Proper cementation technique, adequate cup positioning as well as selection of a sufficiently large DMC are crucial for treatment success. Longer FUs will be needed in the future in order to further prove the benefit of this technique.


Author(s):  
Ivan Zivkovic ◽  
Farid Amirouche ◽  
Francisco Romero ◽  
Mark Gonzalez

Permanent fixation of a cementless total hip arthroplasty requires bone ingrowth into the femoral and acetabular components. Early micromotion at the acetabular cup/bone interface can preclude ingrowth threatening long term fixation. To better characterize micromotion of the interface under loading conditions, an experimental and finite element (FE) study was undertaken. In this study cadaver hemi-pelvises were implanted with cementless acetabular cups and subjected to cyclical axial load and torque. Detailed finite element model, validated with experimental results, was developed to further analyze the conditions affecting the initial stability and loosening of the interface for different loading conditions.


2012 ◽  
Vol 96 (2) ◽  
pp. 89-94 ◽  
Author(s):  
Alessandro Bistolfi ◽  
Giuseppe Massazza ◽  
Federica Rosso ◽  
Stefano Ventura ◽  
Francesco Lagalla ◽  
...  

2007 ◽  
Vol 22 (7) ◽  
pp. 987-992 ◽  
Author(s):  
Jun-Dong Chang ◽  
Je-Hyun Yoo ◽  
Mina Hur ◽  
Sang-Soo Lee ◽  
Yung-Khee Chung ◽  
...  

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Petri Bellova ◽  
Fiona Koch ◽  
Maik Stiehler ◽  
Albrecht Hartmann ◽  
Hagen Fritzsche ◽  
...  

Abstract Background The “cup-in-cup” technique allows for revision of failed total hip arthroplasty (THA) when the cementless cup is well fixed. Furthermore, it can be used for liner wear or mechanical failure where liner replacement may be impossible or impractical. Recently, the “cup-in-cup” technique in combination with dual mobility cups (DMC) has drawn increased attention. Our aim was to report on the clinical and radiographic outcomes following this surgery. Methods From 2015 to 2020, 33 patients treated with the DMC- “cup in cup” technique were retrospectively reviewed. Fourteen patients had died while 19 were available for the final follow-up (FU), of which 15 underwent both a radiograph and a FU visit, 2 underwent a radiograph only and 2 underwent a telephone interview only. Patient-related outcome measures included the HHS and the WOMAC. Radiographs were assessed for implant loosening and positioning. Primary endpoint was revision of any cause and secondary endpoint was loosening of the DMC at the latest FU. The survival analysis was conducted using the Kaplan-Meier method. Results The mean age at surgery was 78.6 ± 7.1 (63–93) years and the mean surgery duration was 124.4 ± 52.0 (60–245) minutes. Recurrent dislocation (42.4%), periprosthetic fracture (39.4%) and polyethylene wear (6.1%) were the most frequent reasons for surgery. The mean FU duration (n = 19) was 28.5 ± 17.3 (3–64) months. The mean HHS score at FU was 59.4 ± 22.2 (29–91) and the mean WOMAC score was 59.7 ± 25.6 (15.6–93.8). Two cups were revised due to instability and one revision was performed due to periprosthetic joint infection, accounting for an overall cup survival rate of 86.8% after a mean FU of 22.9 ± 18.0 (1.5–64.6) months. The survival rate free of loosening was 90.9% after a mean FU of 22.3 ± 18.5 (1.5–64.7) months. Conclusions We found that the cementation of a DMC in a well-fixed cup is a promising short- to mid-term treatment addressing THA instability especially in elderly and frail patients, who benefit from a reduced operation time. Proper cementation technique, adequate cup positioning as well as selection of a sufficiently large DMC are crucial for treatment success. Longer FUs will be needed in the future in order to further prove the benefit of this technique.


2017 ◽  
Vol 32 (11) ◽  
pp. 3495-3501 ◽  
Author(s):  
Kensuke Yoshino ◽  
Tadashi Tsukeoka ◽  
Yoshikazu Tsuneizumi ◽  
Tae Hyun Lee ◽  
Junichi Nakamura ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document