Most soil remediation studies investigated single contaminants or multiple contaminants of the same type. However, in field conditions, soils are often contaminated with potentially both toxic metals and organic pollutants, posing a serious technical challenge. Here, batch experiments were conducted to evaluate the performance of combining in situ solidification/stabilization (ISS) and in situ chemical oxidation (ISCO) for the simultaneous removal of aniline (1000 mg/kg) and Cd (10 mg/kg). All four tested ISS amendments, especially quick lime and Portland cement, promoted in situ chemical oxidation with activated persulfate in contaminated soil. Combined ISS/ISCO remediation effectively removed aniline and reduced the bioavailable Cd content at optimal initial persulfate and ISS amendment concentrations of 1.08 mol/kg and 30 wt% with a seven-day curing time, and significantly reduced leaching. Persulfate inhibited the reduction of the bioavailable Cd content, and ISS amendment with persulfate did not synergistically remediate Cd in co-contaminated soil. Strong alkalinity and high temperature were the main mechanisms driving rapid pollutant removal and immobilization. The reaction of CaO with water released heat, and Ca(OH)2 formation increased the pH. The relative contributions of heat vs. alkaline activation, as well as the contaminant removal efficiency, increased with ISS amendment CaO content. Combined treatment altered the soil physicochemical properties, and significantly increased Ca and S contents. Activated persulfate-related reactions did not negatively impact unconfined compressive strength and hydraulic conductivity. This work improves the selection of persulfate activation methods for the treatment of soils co-contaminated with both potentially toxic metals and organic pollutants.
Remediating Potentially Toxic Metal and Organic Co-Contamination of Soil by Combining In Situ Solidification/Stabilization and Chemical Oxidation: Efficacy, Mechanism, and Evaluation
