In this study, a synthetic phenol solution of water and raw olive mill wastewater (OMW) were considered to achieve purification of the aqueous streams from pollutants. Only OMW was initially submitted to a coagulation/flocculation process, to reduce the turbidity, phenols, and chemical oxygen demand (COD). This first treatment appeared to be mandatory in order to remove solids from wastewater, allowing the successive use of laboratory-made core-shell nanocomposites. In detail, the optimal coagulant concentration, i.e., chitosan, was 500 mg/L, allowing a reduction of the turbidity and the COD value by 90% and 33%, respectively. After this, phenol wastewater was tested for photocatalysis and then OMW was treated by employing the laboratory-made nanocomposites in a photoreactor equipped with visible light sources and using optimal catalyst concentrations, which allowed for an additional 45% reduction of the COD of the OMW. In addition to this, the effect of the operating temperature was investigated on the photocatalytic process, and suitable kinetic models proposed.
Membrane assisted processing of acetone, butanol, and ethanol (ABE) aqueous streams
