Hybrid lattice Boltzmann-direct simulation Monte Carlo approach for flows in three-dimensional geometries

2018 ◽  
Vol 172 ◽  
pp. 492-509 ◽  
Author(s):  
G. Di Staso ◽  
S. Srivastava ◽  
E. Arlemark ◽  
H.J.H. Clercx ◽  
F. Toschi
Author(s):  
Sauro Succi

This chapter provides a bird’s eye view of the main numerical particle methods used in the kinetic theory of fluids, the main purpose being of locating Lattice Boltzmann in the broader context of computational kinetic theory. The leading numerical methods for dense and rarified fluids are Molecular Dynamics (MD) and Direct Simulation Monte Carlo (DSMC), respectively. These methods date of the mid 50s and 60s, respectively, and, ever since, they have undergone a series of impressive developments and refinements which have turned them in major tools of investigation, discovery and design. However, they are both very demanding on computational grounds, which motivates a ceaseless demand for new and improved variants aimed at enhancing their computational efficiency without losing physical fidelity and vice versa, enhance their physical fidelity without compromising computational viability.


Author(s):  
Nikolaos A. Gatsonis ◽  
Wael G. Al Kouz ◽  
Ryan E. Chamberlin

The supersonic flow of nitrogen into a nanochannel is investigated using a three dimensional unstructured Direct Simulation Monte Carlo (U3DSMC) method. The U3DSMC code is validated by comparisons with previous 2D DSMC simulations of flows in micron-scale channels. Rectangular nanochannels with heights between 100 nm to 1000 nm, and aspect ratios L/H of 1, 10, 100 are used in the U3DSMC investigation. The Mach 5.9 freestream has a pressure of 0. 1atm and Knudsen numbers of 0.481, 0.962 and 4.81. The nanochannel walls are assumed to be diffusively reflecting at the freestream temperature. The simulations show the development of a disturbance region upstream from the inlet that depends on the Knudsen number. For the L/H = 10 and L/H = 100 nanochannels considered the velocity decreases from its freestream value velocity decreases from its freestream value and becomes subsonic inside the nanochannel. The temperature shows an enhancement region near the inlet while the density shows an enhancement region inside the nanochannel.


Author(s):  
Fang Yan ◽  
Bakhtier Farouk ◽  
Jeremy Johnson

This paper describes the parallel implementation of a three-dimensional direct simulation Monte Carlo (DSMC) code using the OpenMP procedure on a shared memory multiprocessor computer. A dynamic domain decomposition is performed to maintain load balance among the threads. Performance tests are conducted to evaluate the effect of granularity on efficiency. It is shown that the parallel performance is dependent on the problem size. For larger-scale problems, better efficiency can be expected. Synchronization overhead due to data contention is reduced by re-arranging particle removal procedure. The parallel code is used to simulate flow through a rectangular channel with a high-speed moving wall (Couette flow). For high Knudsen (Kn) numbers, the Couette flow characteristics are found to be very different from their continuum counterparts. ‘Ultimate pressures’ are calculated for a wide range of Kn number flows. The variation of the ultimate pressure with Kn number is computed for given wall speed. Maximum compression ratio is obtained in the transition flow region.


Sign in / Sign up

Export Citation Format

Share Document