scholarly journals Improving permeability of coal seams by freeze-fracturing method: The characterization of pore structure changes under low-field NMR

2020 ◽  
Vol 6 ◽  
pp. 550-561 ◽  
Author(s):  
Yunpei Liang ◽  
Youting Tan ◽  
Fakai Wang ◽  
Yongjiang Luo ◽  
Zhiqiang Zhao
2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Jiazhuo Li ◽  
Penghui Guo ◽  
Wenhao Xie ◽  
Jiaqi Chu ◽  
Zhiqiang Yin ◽  
...  

For the quantitative recognition and characterization of the flow characteristics of polymorphism coalbed gas in tectonic coal, experiments on pore morphology, pore diameter distribution, and methane adsorption law in outburst tectonic coal were carried out by field emission scanning electron microscopy and low-field nuclear magnetic resonance. The results revealed abundant round and dense “pyrolysis pores” in outburst tectonic coals, most of which were adsorption and seepage pores, with micropores accounting for 78.2%. Most pores were independent and formed the network pore space for gas enrichment and migration in outburst tectonic coal. The transverse relaxation time (T2) of methane adsorption in tectonic coal and crushed outburst tectonic coals presented three peaks, namely, adsorption, drifting, and free peaks. The isolation of nanopores and micropores revealed lower adsorption capacity of outburst tectonic coal than that of crushed outburst tectonic coal. The gas staged adsorption of raw coal with outburst tectonic low-permeability was observed. Under low gas pressure, the T2 spectral peak area of methane adsorption increased remarkably, whereas that of desorbed methane increased slightly. As gas pressure was increased to a certain numerical value, the increment of methane adsorption decreased and tended to reach equilibrium. This finding reflected that methane adsorption tended to be saturated after gas pressure reached a certain value, but desorbed methane in isolated micropores increased quickly. The quantitative recognition and characterization of pore structure and gas adsorption in tectonic low-permeability outburst coal seams based on low-field magnetic resonance imaging provide an experimental method for gas exploitation in coal seams and the study and control of coal and gas outburst mechanism.


2020 ◽  
Vol 2020 ◽  
pp. 1-11 ◽  
Author(s):  
Xin Liu ◽  
Jinyou Zhang ◽  
Yunfeng Bai ◽  
Yupeng Zhang ◽  
Ying Zhao ◽  
...  

Low-field NMR theory was employed to study the pore structure of the upper cretaceous oil shale, on the basis of fourteen core samples collected from Qingshankou (UCQ) and Nenjiang (UCN) formations in the Songliao basin. Results indicated that the T2 spectra from NMR measurements for collected samples contain a dominant peak at T2 = 1∼10 ms and are able to be categorized as three types—unimodal, bimodal, and trimodal distributions. The various morphologies of T2 spectra indicate the different pore type and variable connection relationship among pores in shale. By contrast, UCN shale has more single pore type and adsorption pores than UCQ shale. Besides, NMR-based measurements provide reliable characterization on shale porosity, which is verified by the gravimetric approach. Porosities in both UCN and UCQ shales have a wide range (2.3%∼12.5%) and suggest the strong heterogeneity, which partly makes the challenge in selection of the favorable area for shale oil exploration in the Songliao basin. In addition, the pore size of the collected sample has two distribution types, namely, peaked at ∼10 nm and peaked at ∼100 nm. Similarly, two distribution patterns emerge to the specific surface area of the study shale—peaked at ∼2 nm−1 and peaked at ∼20 nm−1. Here, more investigations are needed to clarify this polarization phenomenon. Basically, this study not only exhibits a preliminary understanding on the pore structure of the upper cretaceous oil shale, but also shows the reliability and pertinency of the low-field NMR technique in the petrophysical characterization of the shale oil reservoir. It is expected that this work is helpful to guide the investigation on the pore structure of oil shale from the Songliao basin in theory.


2000 ◽  
Author(s):  
Qingwen Ni ◽  
J. Derwin King ◽  
Xiaodu Wang

Abstract Previous studies have shown that the overall porosity of bone has a significant effect on the mechanical strength of bone. In a comprehensive review on porosity of bone, Martin [1] described that small changes in porosity would lead to significant changes in the stiffness and strength of both compact and spongy bone. In a recently study, McCalden [2], reported that the porosity of bone has a significant effect to absorb energy during fracture. Since changes in numbers and sizes of these natural cavities are directly related to the remodeling processes and biomechanical properties of bone, a direct sensing technique to detect such changes in bone has been long wanted.


2018 ◽  
Vol 50 (1-3) ◽  
pp. 187-198
Author(s):  
Jin-hua Huo ◽  
Zhi-gang Peng ◽  
Zhongbin Ye ◽  
Qian Feng ◽  
Yong Zheng ◽  
...  

2009 ◽  
Vol 45 (8) ◽  
Author(s):  
L. R. Stingaciu ◽  
A. Pohlmeier ◽  
P. Blümler ◽  
L. Weihermüller ◽  
D. van Dusschoten ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document