The concrete samples with various erosion states were disintegrated inside the overpressure vessel using high-velocity water jet. Their erosion states were prepared by application of several laboratory techniques simulating the concrete aging under the natural conditions due to the real applications in practice. The influence of the erosion state on the disintegration rate was tested and the surface topography was studied both prior the application of water jet and post it. The water jet was applied in the overpressure vessel used for simulation of pressures equivalent to the submersion to several depths under the water level. Usual experimental scale responsive to the national practical application range was from the depth of submersion close to the water level up to the depth about 100 meters with the 20 meters step. Nevertheless, the data were obtained for overpressures equivalent to the submersion levels up to 140 meters enlarging so the range of results useful for regression analysis of the physical trend. Several samples were tested even in overpressures simulating depth of submersion equal to 160 meters and more. Few samples of special decorative concretes were also studied and special techniques of their working up were prepared and tested. All results are discussed regarding their application in practice and further development of special routings.
Theoretical and experimental investigation on fracture response of coal impacted by high-velocity water jet
