Linear viscoelastic boundary element formulation for steady state moving loads

2004 ◽  
Vol 28 (7) ◽  
pp. 815-823 ◽  
Author(s):  
José A González ◽  
Ramón Abascal
2012 ◽  
Vol 463-464 ◽  
pp. 499-504 ◽  
Author(s):  
Hosein Ashrafi ◽  
M.R. Bahadori ◽  
M. Shariyat

In this work, a boundary element formulation for 2D linear viscoelastic solid polymers subjected to body force of gravity has been presented. Structural analysis of solid polymers is one of the most important subjects in advanced engineering structures. From basic assumptions of the viscoelastic constitutive equations and the weighted residual techniques, a simple but effective boundary element formulation is implemented for standard linear solid (SLS) model. The SLS model provides an approximate representation of observed behavior of a real advanced polymer in its viscoelastic range. This approach avoids the use of relaxation functions and mathematical transformations, and it is able to solve quasistatic viscoelastic problems with any load time-dependence and boundary conditions. Problem of pressurization of thick-walled viscoelastic tanks made of PMMA polymer, which subjected to a body force, is completely analyzed.


2002 ◽  
Vol 124 (4) ◽  
pp. 988-993 ◽  
Author(s):  
V. Esfahanian ◽  
M. Behbahani-nejad

An approach to developing a general technique for constructing reduced-order models of unsteady flows about three-dimensional complex geometries is presented. The boundary element method along with the potential flow is used to analyze unsteady flows over two-dimensional airfoils, three-dimensional wings, and wing-body configurations. Eigenanalysis of unsteady flows over a NACA 0012 airfoil, a three-dimensional wing with the NACA 0012 section and a wing-body configuration is performed in time domain based on the unsteady boundary element formulation. Reduced-order models are constructed with and without the static correction. The numerical results demonstrate the accuracy and efficiency of the present method in reduced-order modeling of unsteady flows over complex configurations.


1999 ◽  
Vol 36 (24) ◽  
pp. 3617-3638 ◽  
Author(s):  
R. García ◽  
J. Flórez-López ◽  
M. Cerrolaza

2017 ◽  
Vol 08 (03n04) ◽  
pp. 1750007
Author(s):  
Pooneh Maghoul ◽  
Behrouz Gatmiri

This paper presents an advanced formulation of the time-domain two-dimensional (2D) boundary element method (BEM) for an elastic, homogeneous unsaturated soil subjected to dynamic loadings. Unlike the usual time-domain BEM, the present formulation applies a convolution quadrature which requires only the Laplace-domain instead of the time-domain fundamental solutions. The coupled equations governing the dynamic behavior of unsaturated soils ignoring contributions of the inertia effects of the fluids (water and air) are derived based on the poromechanics theory within the framework of a suction-based mathematical model. In this formulation, the solid skeleton displacements [Formula: see text], water pressure [Formula: see text] and air pressure [Formula: see text] are presumed to be independent variables. The fundamental solutions in Laplace transformed-domain for such a dynamic [Formula: see text] theory have been obtained previously by authors. Then, the BE formulation in time is derived after regularization by partial integrations and time and spatial discretizations. Thereafter, the BE formulation is implemented in a 2D boundary element code (PORO-BEM) for the numerical solution. To verify the accuracy of this implementation, the displacement response obtained by the boundary element formulation is verified by comparison with the elastodynamics problem.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Salam Adel Al-Bayati ◽  
Luiz C. Wrobel

Purpose The purpose of this paper is to describe an extension of the boundary element method (BEM) and the dual reciprocity boundary element method (DRBEM) formulations developed for one- and two-dimensional steady-state problems, to analyse transient convection–diffusion problems associated with first-order chemical reaction. Design/methodology/approach The mathematical modelling has used a dual reciprocity approximation to transform the domain integrals arising in the transient equation into equivalent boundary integrals. The integral representation formula for the corresponding problem is obtained from the Green’s second identity, using the fundamental solution of the corresponding steady-state equation with constant coefficients. The finite difference method is used to simulate the time evolution procedure for solving the resulting system of equations. Three different radial basis functions have been successfully implemented to increase the accuracy of the solution and improving the rate of convergence. Findings The numerical results obtained demonstrate the excellent agreement with the analytical solutions to establish the validity of the proposed approach and to confirm its efficiency. Originality/value Finally, the proposed BEM and DRBEM numerical solutions have not displayed any artificial diffusion, oscillatory behaviour or damping of the wave front, as appears in other different numerical methods.


Sign in / Sign up

Export Citation Format

Share Document