The conjugate heat transfer process of cooling a horizontal plate in steady state condition is studied. The model considers both solid and fluid regions in Cartesian coordinates. The problem was solved analytically, considering the fluid flowing in a laminar condition and hydrodynamically developed before any interaction with the heated body. The height of the fluid considered was enough to allow the generation of a thermal boundary layer without any restriction. The conservation of mass, momentum and energy equations were considered to turn the problem into a non dimensional form. The heated body presented a constant heat flux at the bottom side, and convective heat transfer at the top side in contact with the fluid. The other two boundary conditions are adiabatic. The energy equation was considered in the solid to turn it into a non dimensional form. The interface temperature was obtained from a regression using the Chebyshev polynomial approximation. As the problem deals with the cooling of a electronics components, the solution presents the mathematical solution of the energy equation for the solid, including the isothermal lines. The non dimensional form allows a thorough analysis of the problem, considering the influence of the different parameters in the conjugate heat transfer problem. The solution is compared with numerical solution of different problems, and the parameters considered are Reynolds number, plate thickness, Prandtl number, and solid thermal conductivity. The results obtained present isothermal lines, local Nusselt number, and average Nusselt number.
The Heat Transfer Problem in a Rigid and Nonconvex Gray Body with Temperature Dependent Thermal Conductivity
