AbstractPurposeThe purpose of this study is to evaluate variation in the treatment hold pattern and quantify its dosimetric impact in breath-hold radiotherapy, using fraction-specific post-treatment quality assurance.Material and MethodsA patient with lung mets treated using intensity-modulated radiation therapy (IMRT) with active breath coordinator (ABC) was recruited for the study. Treatment beam hold conditions were recorded for all the 25 fractions. The linearity and reproducibility of the dosimetric system were measured. Variation in the dose output of unmodulated open beam with beam hold was studied. Patient-specific quality assurance (PSQA) was performed with and without beam hold, and the results were compared to quantify the dosimetric impact of beam hold.ResultsThere was a considerable amount of variation observed in the number of beam hold for the given field and the monitor unit at which the beam held. Linearity and reproducibility of the dosimetric system were found within the acceptable limits. The average difference over the 25 measurements was 0·044% (0·557 to −0·318%) with standard deviation of 0·248.ConclusionPatient comfort with the ABC system and responsiveness to the therapist communication help to maintain consistent breathing pattern, in turn consistent treatment delivery pattern. However, the magnitude of dosimetric error is much less than the acceptable limits recommended by IROC. The dosimetric error induced by the beam hold is over and above the dose difference observed in conventional PSQA.
Comparison of patient-specific intensity modulated radiation therapy quality assurance for the prostate across multiple institutions
