Magnetic treatment is a promising method of hardening. Metal exposed to alternating magnetic fields changes the performance properties of the surface layer of a combination of magnetic and ultrasonic effects, provides a combined method of processing and strengthening surfaces of machine parts, which eliminates the main disadvantages of magnetic and electrical hardening — instability of physical and mechanical properties of this layer with detail.
The purpose of the work is to investigate the possibility of improving the performance of machine parts based on the combined effect of strong magnetic fields.
The study of the use of a uniform flux of magnetic fields generated by powerful permanent magnets was performed to affect the material volume of non-grinding plates of the cutting tool CNMG_120508E-M. The effect of uniform magnetic flux is initiated as a result of resonant oscillations of the sample caused by broadband exposure of equal amplitude by means of a "white noise" generator and a piezo emitter.
The authors found that as a result of volumetric strengthening of non-grinding plates of carbide cutting tools, by exposure to polyfrequency oscillations in the form of a broadband frequency spectrum of equal amplitudes, a significant reduction in dimensional wear of the plates is achieved. Adding mechanical vibrations to the samples in a uniform constant magnetic field allowed to achieve volumetric hardening of the samples from 150 HB to 240 ÷ 250 HB, ie 60 ÷ 65% in 10—12 minutes, which is the hardening of the samples by 5—6% in one minute.
The work on determining the relationship of changing properties with processing time, frequency range, amplitude and other modes to find the optimal values of processing parameters, has great prospects for the ability to obtain a set of performance characteristics, control external and internal properties of products.
The measurement of the energy of cosmic rays - II—The curvature measurements and the energy spectrum
