Temperature dependence of the propagation vector in Ni3−xCoxV2O8 with x=0.1 and 0.5

We have investigated electron diffraction patterns of a Ti-44Ni-6Fe alloy exhibitng a negative temperature dependence in electrical resistivity below Tmin = 210 K. The electron diffraction patterns taken near Tmin show diffuse satellites at gB2 + <zζ0>* when the zone axis is [111] and [001]. For both the beam directions, the value ζ is slightly smaller than 1/3. On the other hand, the satellites are missing when the zone axis is [110]. This means that the incommensurate phase has a modulated structure with the propagation vector <zζ0>* (ζ~1/3) and the displacement direction is one of <110> which is vertical to the propagation vector. This modulation is obviously the consequence of the phonon softening of TA2-branch with the propagation vector near <zζ0>* (ζ~1/3). In addition to the satellite at gB2 + <zζ0>* (ζ~1/3), satellites appear at gB2+<zζ0>* with ζ = 1/2 when the zone axis is [001] and rod-like steaks appear in <112>* direction when the zone axis is [110]. However, these satellites and rod-like streaks do not show clear temperature dependence, suggesting they are not directly related to the phonon softening of TA2-branch.

Download Full-text

Temperature Dependence of the Critical Electron Dose for Fatty Acid Monolayers

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100053188 ◽

1982 ◽

Vol 40 ◽

pp. 78-79

Author(s):

Kenneth H. Downing ◽

Robert M. Glaeser

Keyword(s):

Electron Beam ◽

Fatty Acid ◽

Inelastic Scattering ◽

Temperature Dependence ◽

Structural Damage ◽

Direct Result ◽

Second Step ◽

Strong Temperature Dependence ◽

Electron Dose ◽

Covalent Bonds

The structural damage of molecules irradiated by electrons is generally considered to occur in two steps. The direct result of inelastic scattering events is the disruption of covalent bonds. Following changes in bond structure, movement of the constituent atoms produces permanent distortions of the molecules. Since at least the second step should show a strong temperature dependence, it was to be expected that cooling a specimen should extend its lifetime in the electron beam. This result has been found in a large number of experiments, but the degree to which cooling the specimen enhances its resistance to radiation damage has been found to vary widely with specimen types.

Download Full-text

Temperature Dependence of Magnetic Domains and Wall Structures

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010009573x ◽

1972 ◽

Vol 30 ◽

pp. 496-497

Author(s):

Sonoko Tsukahara ◽

Tadami Taoka ◽

Hisao Nishizawa

Keyword(s):

Temperature Dependence ◽

Domain Walls ◽

Magnetic Domain ◽

Iron Film ◽

Objective Lens ◽

Lorentz Microscopy ◽

Domain Structures ◽

Wall Structures ◽

Crystal Films ◽

Metallurgical Structure

The high voltage Lorentz microscopy was successfully used to observe changes with temperature; of domain structures and metallurgical structures in an iron film set on the hot stage combined with a goniometer. The microscope used was the JEM-1000 EM which was operated with the objective lens current cut off to eliminate the magnetic field in the specimen position. Single crystal films with an (001) plane were prepared by the epitaxial growth of evaporated iron on a cleaved (001) plane of a rocksalt substrate. They had a uniform thickness from 1000 to 7000 Å.The figure shows the temperature dependence of magnetic domain structure with its corresponding deflection pattern and metallurgical structure observed in a 4500 Å iron film. In general, with increase of temperature, the straight domain walls decrease in their width (at 400°C), curve in an iregular shape (600°C) and then vanish (790°C). The ripple structures with cross-tie walls are observed below the Curie temperature.

Download Full-text