Flow-induced vibrations of an elastic cylindrical shell conveying a compressible fluid

2006 ◽  
Vol 296 (4-5) ◽  
pp. 777-796 ◽  
Author(s):  
S.V. Sorokin ◽  
A.V. Terentiev
Keyword(s):  
Cylindrical Shell ◽  
Compressible Fluid ◽  
Elastic Cylindrical Shell ◽  
Flow Induced Vibrations

scholarly journals LONGITUDINAL-RADIAL VIBRATIONS OF THE ELASTIC CYLINDRICAL SHELL FILLED WITH A VISCOUS COMPRESSIBLE FLUID

2021 ◽  
pp. 139-154
Author(s):  
Kh.Kh. Khudoynazarov ◽  
◽  
R.I. Khalmuradov ◽  
B.F. Yalgashev ◽  
◽  
...  
Keyword(s):  
Cylindrical Shell ◽  
Compressible Fluid ◽  
Isotropic Material ◽  
Wave Number ◽  
Elastic Cylindrical Shell ◽  
Viscous Compressible Fluid ◽  
Radial Vibrations ◽  
Hydroelastic System ◽  
The Mathematical Model ◽  
Fluid Interaction

In this paper, the longitudinal-radial vibrations of the elastic cylindrical shell filled with a viscous compressible fluid are studied using the mathematical model proposed. The general equations for the longitudinal-radial vibrations of the shell made of the homogeneous and isotropic material are derived. These equations can be used to obtain refined equations of vibrations. The proposed algorithm allows one to uniquely determine the stress-strain state of points in any section of the considered hydroelastic system using the field of the required functions in coordinates and time. The benchmark problem of harmonic oscillations in a cylindrical shell with a viscous fluid is solved. The dependences of the frequency on the wave number are obtained for various shell- fluid interaction cases.

Acoustic wave diffraction by an elastic cylindrical shell with viscous filling

1989 ◽  
Vol 25 (7) ◽  
pp. 662-667 ◽  
Author(s):  
O. B. Kachaenko ◽  
L. S. Pal'ko ◽  
N. A. Shul'ga
Keyword(s):  
Cylindrical Shell ◽  
Acoustic Wave ◽  
Wave Diffraction ◽  
Elastic Cylindrical Shell

scholarly journals An Evaluation of Active Noise Control in a Cylindrical Shell

1989 ◽  
Vol 111 (3) ◽  
pp. 337-342 ◽  
Author(s):  
R. J. Silcox ◽  
H. C. Lester ◽  
S. B. Abler
Keyword(s):  
Cylindrical Shell ◽  
Analytical Model ◽  
Noise Control ◽  
Active Noise Control ◽  
Effective Control ◽  
Elastic Cylindrical Shell ◽  
Noise Sources ◽  
Active Noise ◽  
Fixed Array ◽  
Forced Responses

This paper examines the physical mechanisms governing the use of active noise control in an extended volume of a cylindrical shell. Measured data were compared with computed results from a previously derived analytical model based on infinite shell theory. For both the analytical model and experiment, the radiation of external monopoles is coupled to the internal acoustic field through the radial displacement of the thin, elastic, cylindrical shell. An active noise control system was implemented inside the cylinder using a fixed array of discrete monopole sources, all of which lie in the plane of the exterior noise sources. Good agreement between measurement and prediction was obtained for both internal pressure response and overall noise reduction. Attenuations in the source plane greater than 15 dB were recorded along with a uniformly quieted noise environment over an indicative length inside the experimental model. Results indicate that for forced responses with extended axial distributions, axial arrays of control sources may be required. Finally, the Nyquist criteria for the number of azimuthal control sources is shown to provide for effective control over the full cylinder cross section.

scholarly journals Elastic Response of Acoustic Coating on Fluid-Loaded Rib-Stiffened Cylindrical Shells

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Christopher Gilles Doherty ◽  
Steve C. Southward ◽  
Andrew J. Hull
Keyword(s):  
Cylindrical Shell ◽  
Cylindrical Shells ◽  
Coupled System ◽  
Elastic Response ◽  
System Response ◽  
Elastic Cylindrical Shell ◽  
Fluid Environment ◽  
Reinforcing Ribs ◽  
Double Index ◽  
Stress Boundary Conditions

Reinforced cylindrical shells are used in numerous industries; common examples include undersea vehicles, aircraft, and industrial piping. Current models typically incorporate approximation theories to determine shell behavior, which are limited by both thickness and frequency. In addition, many applications feature coatings on the shell interior or exterior that normally have thicknesses which must also be considered. To increase the fidelity of such systems, this work develops an analytic model of an elastic cylindrical shell featuring periodically spaced ring stiffeners with a coating applied to the outer surface. There is an external fluid environment. Beginning with the equations of elasticity for a solid, spatial-domain displacement field solutions are developed incorporating unknown wave propagation coefficients. These fields are used to determine stresses at the boundaries of the shell and coating, which are then coupled with stresses from the stiffeners and fluid. The stress boundary conditions contain double-index infinite summations, which are decoupled, truncated, and recombined into a global matrix equation. The solution to this global equation results in the displacement responses of the system as well as the exterior scattered pressure field. An incident acoustic wave excitation is considered. Thin-shell reference models are used for validation, and the predicted system response to an example simulation is examined. It is shown that the reinforcing ribs and coating add significant complexity to the overall cylindrical shell model; however, the proposed approach enables the study of structural and acoustic responses of the coupled system.

Sign in / Sign up

Export Citation Format

Share Document