scholarly journals Development of neural network models for wire electrical discharge machining of Haste alloy

2020 ◽  
Author(s):  
D. Palanisamy ◽  
N. Manikandan ◽  
R. Ramesh ◽  
A. Devaraju ◽  
D. ArulKirubakaran
Keyword(s):  
Neural Network ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Network Models ◽  
Wire Electrical Discharge Machining ◽  
Neural Network Models

Artificial Neural Network Modeling for Electrical Discharge Machining Parameters

2014 ◽  
pp. 281-302
Author(s):  
Raja Das ◽  
M. K. Pradhan
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Network Models ◽  
Neural Network Models ◽  
Copper Electrodes ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

The objective of the chapter is to present the application of Artificial Neural Network (ANN) modelling of the Electrical Discharge Machining (EDM) process. It establishes the best ANN model by comparing the prediction from different models under the effect of process parameters. In EDM, the motivation is frequently to get better Material Removal Rate (MRR) with fulfilling better surface quality of machined components. The vital requirements are as small a radial overcut with minimal tool wear rate. The quality of a machined surface is very important to fulfilling the growing demands of higher component performance, durability, and reliability. To improve the reliability of the machine component, it is necessary to have in depth knowledge of the effect of parameters on the aforesaid responses of the components. An extensive chain of experiments has been conducted over a wide range of input parameters, using the full factorial design. More than 150 experiments have been conducted on AISI D2 work piece materials using copper electrodes to get the data for training and testing. The additional experiments were obtained to validate the model predictions. The performance of three neural network models is discussed in the evaluation of the generalization ability of the trained neural network. It was observed that the artificial neural network models could predict the process performance with reasonable accuracy, under varying machining conditions.

scholarly journals Response Surface Methodology and Artificial Neural Network-Based Models for Predicting Performance of Wire Electrical Discharge Machining of Inconel 718 Alloy

2020 ◽  
Vol 4 (2) ◽  
pp. 44
Author(s):  
Vishal Lalwani ◽  
Priyaranjan Sharma ◽  
Catalin Iulian Pruncu ◽  
Deepak Rajendra Unune
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Inconel 718 ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Wire Electrical Discharge Machining ◽  
Ann Model ◽  
Control Factors

This paper deals with the development and comparison of prediction models established using response surface methodology (RSM) and artificial neural network (ANN) for a wire electrical discharge machining (WEDM) process. The WEDM experiments were designed using central composite design (CCD) for machining of Inconel 718 superalloy. During experimentation, the pulse-on-time (TON), pulse-off-time (TOFF), servo-voltage (SV), peak current (IP), and wire tension (WT) were chosen as control factors, whereas, the kerf width (Kf), surface roughness (Ra), and materials removal rate (MRR) were selected as performance attributes. The analysis of variance tests was performed to identify the control factors that significantly affect the performance attributes. The double hidden layer ANN model was developed using a back-propagation ANN algorithm, trained by the experimental results. The prediction accuracy of the established ANN model was found to be superior to the RSM model. Finally, the Non-Dominated Sorting Genetic Algorithm-II (NSGA- II) was implemented to determine the optimum WEDM conditions from multiple objectives.

scholarly journals Modeling and Optimization of Fractal Dimension in Wire Electrical Discharge Machining of EN 31 Steel Using the ANN-GA Approach

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 454 ◽  
Author(s):  
Arkadeb Mukhopadhyay ◽  
Tapan Barman ◽  
Prasanta Sahoo ◽  
J. Davim
Keyword(s):  
Neural Network ◽  
Genetic Algorithm ◽  
Fractal Dimension ◽  
Process Parameters ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Wire Electrical Discharge Machining ◽  
Machining Parameters ◽  
Machined Surface ◽  
Wedm Process

To achieve enhanced surface characteristics in wire electrical discharge machining (WEDM), the present work reports the use of an artificial neural network (ANN) combined with a genetic algorithm (GA) for the correlation and optimization of WEDM process parameters. The parameters considered are the discharge current, voltage, pulse-on time, and pulse-off time, while the response is fractal dimension. The usefulness of fractal dimension to characterize a machined surface lies in the fact that it is independent of the resolution of the instrument or length scales. Experiments were carried out based on a rotatable central composite design. A feed-forward ANN architecture trained using the Levenberg-Marquardt (L-M) back-propagation algorithm has been used to model the complex relationship between WEDM process parameters and fractal dimension. After several trials, 4-3-3-1 neural network architecture has been found to predict the fractal dimension with reasonable accuracy, having an overall R-value of 0.97. Furthermore, the genetic algorithm (GA) has been used to predict the optimal combination of machining parameters to achieve a higher fractal dimension. The predicted optimal condition is seen to be in close agreement with experimental results. Scanning electron micrography of the machined surface reveals that the combined ANN-GA method can significantly improve the surface texture produced from WEDM by reducing the formation of re-solidified globules.

Sign in / Sign up

Export Citation Format

Share Document