scholarly journals Experimental study on a new FBG-based and Terfenol-D inclinometer for slope displacement monitoring

Measurement ◽  
2020 ◽  
Vol 151 ◽  
pp. 107172 ◽  
Author(s):  
Huafu Pei ◽  
Junhao Jing ◽  
Siqi Zhang
2012 ◽  
Vol 256-259 ◽  
pp. 1429-1433
Author(s):  
Pan Yang ◽  
Shu Dong Zhang ◽  
Jun Mei Guo ◽  
Cheng Xuan Ma ◽  
You Cheng Shen ◽  
...  

Slope safety has been well concerned by the society in recent years. Slope displacement monitoring is an important subject of slope safety and its research has been developing rapidly. In this article, we draw up a pilot slope safety automatic monitoring scheme for the project of Road No.1 in Republic of Congo, which depends on real-time displacement monitoring. This scheme uses fixed inclinometer as its main appliance and achieves wireless data transmission. During this process, we considered both local climate and the characteristics of high slopes along the road, and finished a series of work including monitoring position selection, critical slip surface prediction and finally monitoring system establishment. Our ultimate objective is to achieve real-time monitoring of slope situation, and furthermore set up the relationship among slope displacement, rainfall and time. With the derived relationship we would be able to forecast the development of slope deformation and possible danger caused by the slopes.


Author(s):  
Norio Baba ◽  
Norihiko Ichise ◽  
Syunya Watanabe

The tilted beam illumination method is used to improve the resolution comparing with the axial illumination mode. Using this advantage, a restoration method of several tilted beam images covering the full azimuthal range was proposed by Saxton, and experimentally examined. To make this technique more reliable it seems that some practical problems still remain. In this report the restoration was attempted and the problems were considered. In our study, four problems were pointed out for the experiment of the restoration. (1) Accurate beam tilt adjustment to fit the incident beam to the coma-free axis for the symmetrical beam tilting over the full azimuthal range. (2) Accurate measurements of the optical parameters which are necessary to design the restoration filter. Even if the spherical aberration coefficient Cs is known with accuracy and the axial astigmatism is sufficiently compensated, at least the defocus value must be measured. (3) Accurate alignment of the tilt-azimuth series images.


Sign in / Sign up

Export Citation Format

Share Document