Inference on fission timescale from neutron multiplicity measurement in18O+184W

The pre-scission and post-scission neutron multiplicities are measured for the 18O + 184W reaction in the excitation energy range of 67.23−76.37 MeV. Langevin dynamical calculations are performed to infer the energy dependence of fission decay time in compliance with the measured neutron multiplicities. Different models for nuclear dissipation are employed for this purpose. Fission process is usually expected to be faster at a higher beam energy. However, we found an enhancement in the average fission time as the incident beam energy increases. It happens because a higher excitation energy helps more neutrons to evaporate that eventually stabilizes the system against fission. The competition between fission and neutron evaporation delicately depends on the available excitation energy and it is explained here with the help of the partial fission yields contributed by the different isotopes of the primary compound nucleus.

Characteristic parameters of photonic nanojets of single dielectric microspheres illuminated by focused broadband radiation

Herein, we report the theoretical investigation on the photonic nanojets (PNJs) of single dielectric microspheres illuminated by focused broadband radiation (polychromatic light) from a Halogen lamp, supercontinuum source, light-emitting diode, and Hg arc lamp. The role of incident beam waist, refractive index of the surrounding medium, and radius of the microsphere on the characteristic parameters such as the electric field intensity enhancement, effective width, and length of the PNJ is studied. Interestingly, the characteristic parameters of the PNJs of solid microspheres obtained for the above-mentioned broadband radiation sources are found close to those observed for the focused monochromatic radiation of wavelengths which are near to the central wavelengths of the sources. Moreover, the characteristic parameters of PNJs of the core–shell microspheres of different thicknesses (t) illuminated by polychromatic radiation from most commonly used sources such as Halogen and Hg arc lamps are studied. For each t value, a suitable wavelength of monochromatic radiation has been found to generate the PNJ with characteristic parameters which are close to those obtained in the case of polychromatic radiation. We believe that the analytical theory and the theoretical simulations reported here would be useful for researchers who work in the fields such as PNJ assisted photoacoustic spectroscopy, white light nanoscopy, low-coherence phase-shifting interference microscopy, and Mirau interferometry.

Measurement of ionization loss of 50 GeV protons in silicon with smoothly tunable up to 1 cm thickness using a single flat detector

Research of the ionization loss of 50 GeV protons, the path of which in the depleted layer of the silicon detector was smoothly regulated in the range from 0.3 to 10 mm, is presented. In the experiment, we used a flat silicon detector with a fixed thickness of the depleted layer of 300 μm. The smooth regulation of the path was realized due to the variation of the angle between the surface of the detector and the incident proton beam. The comparison of experimental data and theoretical calculations of the ionization loss demonstrates agreement in all range of thicknesses. Results of the research can be used in order to control the angle between the surface of the detector and the incident beam of relativistic particles. Besides, the results can be used in the analysis of data from astrophysical silicon detectors of charged particles if high-energy particles crossed flat detectors at arbitrary angle.

A Photon Force and Flow for Dissipative Structuring: Application to Pigments, Plants and Ecosystems

Through a modern derivation of Planck’s formula for the entropy of an arbitrary beam of photons, we derive a general expression for entropy production due to the irreversible process of the absorption of an arbitrary incident photon spectrum in material and its dissipation into an infrared-shifted grey-body emitted spectrum, with the rest being reflected or transmitted. Employing the framework of Classical Irreversible Thermodynamic theory, we define the generalized thermodynamic flow as the flow of photons from the incident beam into the material and the generalized thermodynamic force is, then, the entropy production divided by the photon flow, which is the entropy production per unit photon at a given wavelength. We compare the entropy production of different inorganic and organic materials (water, desert, leaves and forests) under sunlight and show that organic materials are the greater entropy-producing materials. Intriguingly, plant and phytoplankton pigments (including chlorophyll) reach peak absorption exactly where entropy production through photon dissipation is maximal for our solar spectrum 430<λ<550 nm, while photosynthetic efficiency is maximal between 600 and 700 nm. These results suggest that the evolution of pigments, plants and ecosystems has been towards optimizing entropy production, rather than photosynthesis. We propose using the wavelength dependence of global entropy production as a biosignature for discovering life on planets of other stars.

Applicability of DIN 5036-3 to Transmittance Haze Measurement

This paper evaluates the applicability of the method described in DIN 5036-3 for transmittance haze measurement, theoretically and experimentally. It is shown that DIN 5036-3 is valid for total transmittance measurement. However, when applying to diffuse transmittance measurement, the measured value is lower than the theoretical one, resulting a lower value of calculated transmittance haze. The reflectance of the integrating sphere and collimation of the incident beam are the keys to achieve better agreement between theory and experiment. Further study is necessary to recommend solutions for the discovered issues.

Terahertz microscope with oblique subwavelength illumination: design principle

It is shown that the image contrast in the air when using a microscope based on dielectric microparticles with a size of the order of wavelength can be significantly enhanced with the help microparticles that provide the formation of the radiation localisation region at an angle to the direction of radiation incidence (at an angle to the optical axis). For this purpose, a screen is placed in front of the particle, which blocks part of the incident beam, forming a photonic hook or a photonic jet (terajet) with oblique illumination in the near field.

A Photon Force and Flow for Dissipative Structuring: Application to Pigments, Plants and Ecosystems

Through a modern derivation of Planck's formula for the entropy of an arbitrary beam of photons we derive a general expression for the entropy production due to the irreversible process of the absorption of an arbitrary incident photon spectrum in material and its dissipation into an infrared-shifted grey-body emitted spectrum, the rest being reflected or transmitted. Employing the framework of Classical Irreversible Thermodynamic theory, we define the generalized thermodynamic flow as the flow of photons from the incident beam into the material and the generalized thermodynamic force is then just the entropy production divided by the photon flow which is the entropy production per unit photon at a given wavelength. We compare the entropy production under sunlight of different inorganic and organic materials (water, desert, leaves and forests) and show that organic materials are the greater entropy producing materials. Intriguingly, plant and phytoplankton pigments (including chlorophyll) have peak absorption exactly where entropy production through photon dissipation is maximal for our solar spectrum $430&lt;\lambda&lt;550$ nm, while photosynthetic efficiency is maximal between 600 and 700 nm. These results suggest that the evolution of pigments, plants and ecosystems has been towards optimizing entropy production rather than photosynthesis. We propose using the wavelength dependence of global entropy production as a biosignature for discovering life on planets of other stars.

Parametric Mid-Spatial Frequency Surface Error Synthesis

Standard mid-spatial frequency tooling mark errors were parameterized into a series of characteristic features and systematically investigated. Diffraction encircled and ensquared energy radii at the 90% levels from an unpowered optical surface were determined as a function of the root-mean-square surface irregularity, characteristic tooling mark parameters, fold mirror rotation angle, and incident beam f-number. Tooling mark frequencies on the order of 20 cycles per aperture or less were considered. This subset encompasses small footprints on single-point diamond turned optics or large footprints on sub-aperture tool polished optics. Of the characteristic features, off-axis fabrication distance held the highest impact to encircled and ensquared energy radii. The transverse oscillation of a tooling path was found to be the second highest contributor. Both impacts increased with radial tooling mark frequency.

Investigation of the Pancharatnam-Berry phase element for the generation of the top-hat beam

Within optics, the Pancharatnam-Berry phase enables the design and creation of various flat special optical elements such as top-hat converters. We present a study on engineering efficient vectorial top-hat converters inscribed in glass by high-power femtosecond laser pulses. We phase-encode a top-hat converter and demonstrate how its quality is influenced by various parameters. We investigate theoretically the generation of the top-hat beam under imperfect conditions such as the mismatch of the incident beam width or the misalignment of the center of the converter. Experimental verification of the concept is also presented.

Artifact removal in the contour areas of SAXS-CT images by Tikhonov-L1 minimization

Small-angle X-ray scattering (SAXS) coupled with computed tomography (CT), denoted SAXS-CT, has enabled the spatial distribution of the characteristic parameters (e.g. size, shape, surface, length) of nanoscale structures inside samples to be visualized. In this work, a new scheme with Tikhonov regularization was developed to remove the effects of artifacts caused by streak scattering originating from the reflection of the incident beam in the contour regions of the sample. The noise due to streak scattering was successfully removed from the sinogram image and hence the CT image could be reconstructed free from artifacts in the contour regions.