Non-destructive Techniques to Assess Mechanical and Physical Properties of Soft Calcarenitic Stones

Abstract Research on the mechanical and physical properties of wood is commonly carried out on either small clear specimens or structural-sized boards. The first approach was more frequently utilized in the past, while the latter is more commonly used nowadays. However, there is very little information on how the two approaches relate with one another. This study aimed to quantify the relationships between the mechanical [modulus of elasticity (MOE) and bending strength] and physical properties (density) of both specimen sizes. A total of 1376 structural-sized boards from three different species (Douglas-fir, Norway spruce and Sitka spruce) were tested in bending, after which a small clear specimen was extracted from the undamaged portion of each board and re-tested in bending. Prior to destructive testing, all boards and clear specimens were evaluated using non-destructive technology. Poor-to-moderate relationships were found between all measured mechanical and physical properties of structural-sized timber and small clear specimens. In both specimen sizes, the properties correlated with one another within the same specimen size, as well as across the two sizes. The strength of correlations appears to be somewhat species dependent. Relatively good relationships were identified when comparing the mean tree values of the properties examined, suggesting either method can be used for a tree-level comparison. The non-destructive evaluation of specimens was shown to reflect the measured properties moderately well, with the relationships changing significantly depending on which measured property was being predicted.

Download Full-text

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

Jurnal Riset Industri Hasil Hutan ◽

10.24111/jrihh.v4i1.1195 ◽

2012 ◽

Vol 4 (1) ◽

pp. 1

Author(s):

Djoko Purwanto

Keyword(s):

Mechanical Properties ◽

Compressive Strength ◽

Physical Properties ◽

Treatment Process ◽

Acacia Mangium ◽

Physical And Mechanical Properties ◽

Wood Fibers ◽

Test Parameters ◽

Mechanical And Physical Properties ◽

Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

Download Full-text