Pumped-storage hydropower plants with underground reservoir: Influence of air pressure on the efficiency of the Francis turbine and energy production

2019 ◽  
Vol 143 ◽  
pp. 1427-1438 ◽  
Author(s):  
Javier Menéndez ◽  
Jesús M. Fernández-Oro ◽  
Mónica Galdo ◽  
Jorge Loredo
2021 ◽  
Author(s):  
Estanislao Pujades

<p>Underground pumped storage hydropower (UPSH) is an alternative energy storage system (ESS) for flat regions, where conventional pumped storage hydropower plants cannot be constructed due to topographical limitations. UPSH plants consist in two reservoirs, the upper one is located at the surface or possibly underground (but at shallow depth) while the lower one is underground. Although the underground reservoir can be drilled, the use of abandoned mines (deep or open pit mines) as underground reservoir is a more efficient alternative that is also beneficial for local communities after the cessation of mining activities. Given that mines are rarely waterproofed, water exchanges between UPSH plants and the underground medium are expected. Water exchanges may have negative consequences for the environment, but also for the feasibility of UPSH plants. The impacts on the environment and the plant efficiency may have hydraulic (changes of the natural piezometric head distribution, effects in the hydraulic head difference between the two reservoirs, etc.) or hydrochemical nature (dissolution and/or precipitation of minerals in the aquifer and in the reservoirs, corrosion of facilities, modification of pH, etc.). At this stage, it is required a sound understanding of all the impacts produced by the water exchanges and evaluate under which circumstances they are mitigated. This assessment will allow ascertaining criteria for the selection of the best places to construct future UPSH plants.</p>


2020 ◽  
Author(s):  
Estanislao Pujades

<p>Underground pumped storage hydropower (UPSH) is an alternative energy storage system (ESS) for flat regions, where conventional pumped storage hydropower plants cannot be constructed due to topographical limitations. UPSH plants consist in two reservoirs, the upper one is located at the surface or possibly underground (but at shallow depth) while the lower one is underground. Although the underground reservoir can be drilled, the use of abandoned mines (deep or open pit mines) as underground reservoir is a more efficient alternative that is also beneficial for local communities after the cessation of mining activities. Given that mines are rarely waterproofed, water exchanges between UPSH plants and the underground medium are expected. Water exchanges may have negative consequences for the environment, but also for the feasibility of UPSH plants. The impacts on the environment and the plant efficiency may have hydraulic (changes of the natural piezometric head distribution, effects in the hydraulic head difference between the two reservoirs, etc.) or hydrochemical nature (dissolution and/or precipitation of minerals in the aquifer and in the reservoirs, corrosion of facilities, modification of pH, etc.). At this stage, it is required a sound understanding of all the impacts produced by the water exchanges and evaluate under which circumstances they are mitigated. This assessment will allow ascertaining criteria for the selection of the best places to construct future UPSH plants.</p>


2021 ◽  
Author(s):  
Estanislao Pujades

Underground Pumped Storage Hydropower (UPSH) is a potential alternative to manage electricity production in flat regions. UPSH plants will interact with the surrounding porous medium through exchanges of groundwater. These exchanges may impact the surrounding aquifers, but they may also influence the efficiency of the pumps and turbines because affecting the head difference between the reservoirs. Despite the relevance for an accurate efficiency assessment, the influence of the groundwater exchanges has not been previously addressed.A numerical study of a synthetic case is presented to highlight the importance of considering the groundwater exchanges with the surrounding porous medium. The general methodology is designed in order to be further applied in the decision making of future UPSH plants introducing each case specific complexity. The underground reservoir of a hypothetical UPSH plant, which consists in an open pit mine, is considered and modelled together with the surrounding porous medium. Several scenarios with different characteristics are simulated and their results are compared in terms of (1) head difference between the upper and lower reservoirs and (2) efficiency by considering the theoretical performance curves of a pump and a turbine. The results show that the efficiency is improved when the groundwater exchanges increase. Thus, the highest efficiencies will be reached when (1) the underground reservoir is located in a transmissive porous medium and (2) the walls of the open pit mine do not constrain the groundwater exchanges (they are not waterproofed). However, a compromise must be found because the characteristics that increase the efficiency also increase the environmental impacts. Meaningful and reliable results are computed in relation to the characteristics of the intermittent and expected stops of UPSH plants. The frequency of pumping and injection must be considered to properly configure the pumps and turbines of future UPSH plants. If not, pumps and turbines could operate far from their best efficiency conditions.


Author(s):  
Giovanna Cavazzini ◽  
Juan I. Pérez-Dίaz ◽  
Francisco Blázquez ◽  
Carlos Platero ◽  
Jesύs Fraile-Ardanuy ◽  
...  

2018 ◽  
Vol 8 (12) ◽  
pp. 2505 ◽  
Author(s):  
Jean Decaix ◽  
Vlad Hasmatuchi ◽  
Maximilian Titzschkau ◽  
Cécile Münch-Alligné

Due to the integration of new renewable energies, the electrical grid undergoes instabilities. Hydroelectric power plants are key players for grid control thanks to pumped storage power plants. However, this objective requires extending the operating range of the machines and increasing the number of start-up, stand-by, and shut-down procedures, which reduces the lifespan of the machines. CFD based on standard URANS turbulence modeling is currently able to predict accurately the performances of the hydraulic turbines for operating points close to the Best Efficiency Point (BEP). However, far from the BEP, the standard URANS approach is less efficient to capture the dynamics of 3D flows. The current study focuses on a hydraulic turbine, which has been investigated at the BEP and at the Speed-No-Load (SNL) operating conditions. Several “advanced” URANS models such as the Scale-Adaptive Simulation (SAS) SST k - ω and the BSL- EARSM have been considered and compared with the SST k - ω model. The main conclusion of this study is that, at the SNL operating condition, the prediction of the topology and the dynamics of the flow on the suction side of the runner blade channels close to the trailing edge are influenced by the turbulence model.


2019 ◽  
Vol 256 ◽  
pp. 113980 ◽  
Author(s):  
Alban Kuriqi ◽  
António N. Pinheiro ◽  
Alvaro Sordo-Ward ◽  
Luis Garrote

2018 ◽  
Vol 33 (1) ◽  
pp. 103-115 ◽  
Author(s):  
Manuel Chazarra ◽  
Juan Ignacio Perez-Diaz ◽  
Javier Garcia-Gonzalez

2016 ◽  
Vol 67 (4) ◽  
pp. 234-245 ◽  
Author(s):  
Goran Knežević ◽  
Zoran Baus ◽  
Srete Nikolovski

Abstract In this paper short-term planning algorithm for hybrid power system consist of different types of cascade hydropower plants (run-of-the river, pumped storage, conventional), thermal power plants (coal-fired power plants, combined cycle gas-fired power plants) and wind farms is presented. The optimization process provides a joint bid of the hybrid system, and thus making the operation schedule of hydro and thermal power plants, the operation condition of pumped-storage hydropower plants with the aim of maximizing profits on day ahead market, according to expected hourly electricity prices, the expected local water inflow in certain hydropower plants, and the expected production of electrical energy from the wind farm, taking into account previously contracted bilateral agreement for electricity generation. Optimization process is formulated as hourly-discretized mixed integer linear optimization problem. Optimization model is applied on the case study in order to show general features of the developed model.


Sign in / Sign up

Export Citation Format

Share Document