scholarly journals Supersaturation functions in binary solid solution–aqueous solution systems

2003 ◽  
Vol 67 (9) ◽  
pp. 1601-1608 ◽  
Author(s):  
J.M Astilleros ◽  
C.M Pina ◽  
L Fernández-Díaz ◽  
A Putnis
2006 ◽  
Vol 306 (7) ◽  
pp. 553-574 ◽  
Author(s):  
A. G. Shtukenberg ◽  
Y. O. Punin ◽  
P. Azimov

2009 ◽  
Vol 6 (s1) ◽  
pp. S153-S158 ◽  
Author(s):  
Tariq S. Najim ◽  
Suhad A. Yassin

Modified pomegranate peel (MPGP) and formaldehyde modified pomegranate peel (FMPGP) were prepared and used as adsorbent for removal of Cr(VI) ions from aqueous solution using batch process. The temperature variation study of adsorption on both adsorbents revealed that the adsorption process is endothermic, from the positive values of ∆H˚. These values lie in the range of physisorption. The negative values of ∆G˚ show the adsorption is favorable and spontaneous. On the other hand, these negative values increases with increase in temperature on both adsorbents, which indicate that the adsorption is preferable at higher temperatures. ∆S˚ values showed that the process is accompanied by increase in disorder and randomness at the solid solution interface due to the reorientation of water molecules and Cr(VI) ions around the adsorbent surface. The endothermic nature of the adsorption was also confirmed from the positive values of activation energy, Ea, the low values of Ea confirm the physisorption mechanism of adsorption. The sticking probability, S*, of Cr(VI) ion on surface of both adsorbents showed that the adsorption is preferable due to low values of S*(0< S*< 1 ), but S*values are lower for FMPGP indicating that the adsorption on FMPGP is more preferable .


2014 ◽  
Vol 2014 ◽  
pp. 1-5
Author(s):  
Santosh Dubey ◽  
S. K. Joshi ◽  
B. S. Tewari

The stability of a binary solid solution under irradiation has been studied. This has been done by performing linear stability analysis of a set of nonlinear reaction-diffusion equations under uniform irradiation. Owing to the complexity of the resulting system of eigenvalue equations, a numerical solution has been attempted to calculate the dispersion relations. The set of reaction-diffusion equations represent the coupled dynamics of vacancies, dumbbell-type interstitials, and lattice atoms. For a miscible system (Cu-Au) under uniform irradiation, the initiation and growth of the instability have been studied as a function of various control parameters.


2017 ◽  
Vol 898 ◽  
pp. 1935-1939 ◽  
Author(s):  
Yuan Song ◽  
Yuan Lin Zheng ◽  
Yu Fei Tang ◽  
Hai Bing Yang

Ceramic pigment is the key component of the ink color in the 3D printing process of ceramic products. The color performance and stability of ceramic pigments after calcination still need to be improved. In the present study the cobalt aluminate (CoAl2O4) ceramic pigment powders were fabricated by sol-gel method. The effects of fabrication processes on color properties of CoAl2O4 ceramic pigments were investigated. The compositions and morphologies of CoAl2O4 ceramic pigment powders were characterized. The stability of CoAl2O4 ceramic pigments was discussed. The results showed that the CoAl2O4 ceramic pigment with high chroma was obtained at calcination temperature of 1200°C and the Co/Al ratio is 1:3. The Zeta potential of the fabricated CoAl2O4 ceramic pigment powders in aqueous solution was-66.2 mV, which represented good dispersion stability. The chroma and saturation of the CoAl2O4 ceramic pigment increased owing to that the oxide solid solution in the spinel structure increased after being sintered at 1300 oC.


Sign in / Sign up

Export Citation Format

Share Document