Determination of the Structure and Chemistry of Thermally Grown Oxides in Thermal Barrier Coatings

1999 ◽  
Vol 5 (S2) ◽  
pp. 854-855
Author(s):  
M.R. Brickey ◽  
J.L. Lee
Keyword(s):  
Thermal Barrier Coatings ◽  
Nickel Aluminide ◽  
Physical Vapor Deposition ◽  
Thermal Exposure ◽  
Thermally Grown Oxide ◽  
Thermal Barrier ◽  
Engine Operation ◽  
Barrier Coatings ◽  
Combustion Gas ◽  
Thermally Grown

Thermal barrier coatings (TBCs) insulate gas turbine hot section components from the hot (∽1200 - 1450°C) combustion gas exhaust stream. An airline company can save millions of dollars per year by using TBCs to protect vital engine components and to improve fuel efficiency. TBCs typically consist of an 8 wt.% yttria-partially-stabilized zirconia (YPSZ) ceramic topcoat deposited on a platinum-nickel-aluminide (Pt-Ni-Al) bondcoat covering a nickel-based superalloy substrate. Thermal exposure during YPSZ electron beam-physical vapor deposition (EB-PVD) and engine operation promotes the formation of a thermally grown oxide (TGO) between the Pt-Ni-Al and the YPSZ layers. Stresses can develop at the Pt-Ni-Al/TGO and TGO/YPSZ interfaces due to TGO growth and thermal expansion coefficient mismatch. These stresses eventually cause spallation of the YPSZ, leaving the metallic substrate vulnerable to high temperature degradation since exhaust temperatures are often higher than the melting temperature of most nickel-based superalloys (∽1200 - 1450°C).

STUDY ON PREPARATION TECHNOLOGIES OF THERMAL BARRIER COATINGS

2016 ◽  
Vol 24 (04) ◽  
pp. 1730004 ◽  
Author(s):  
TAO WANG ◽  
NING WANG ◽  
YANG LI ◽  
HAO WANG ◽  
JIE TANG ◽  
...  
Keyword(s):  
Thermal Barrier Coatings ◽  
Physical Vapor Deposition ◽  
Turbine Blades ◽  
Thermally Grown Oxide ◽  
Thermal Barrier ◽  
Properties Of Coatings ◽  
Preparation Technology ◽  
Barrier Coatings ◽  
Gradient Coating ◽  
Nano Coating

Thermal barrier coatings (TBCs) is one of the main key technology for the high-pressure turbine blades which are the main components of the high-performance aerospace engines. It offers protection for underline metallic components from corrosion, oxidation and localized melting by insulating the metal from hot gases in the engine core. The properties and lifetime of TBCs are greatly influenced by the preparation technology, which includes plasma spraying (PS), physical vapor deposition (PVD) and laser re-melting (LM). In this paper, three technologies used to prepare the TBCs are reviewed. Resulting features of coating fabricated by each technology are also discussed such as: the porosity, the thermally grown oxide (TGO), the erosion resistance, the thermal shock and so on. Especially, it is pointed out that the performances of gradient coating and nano-coating are better than the traditional coatings. In addition, it is widely accepted that laser can be applied to re-melt the PS coating and even directly clad the gradient coating. In the future, the traditional preparation technology should be improved continually in order to enhance the coating lifetime, enhance the properties of coating and lower the cost of process. Moreover, the researches on gradient-nano-structured coatings preparation are absent and should be done with emphasis since the nano-structure and gradient structure can both benefit the lifetime and properties of coatings.

Interfacial Kinetics of High Temperature Oxidation in YSZ Thermal Barrier Coatings With Bond Coatings of NiCoCrAlY With 0.25% Hf

2009 ◽  
Author(s):  
Winston Soboyejo ◽  
Patrick Mensah ◽  
Ravinder Diwan
Keyword(s):  
High Temperature ◽  
Thermal Barrier Coatings ◽  
High Temperature Oxidation ◽  
Structural Evolution ◽  
Isothermal Oxidation ◽  
Thermally Grown Oxide ◽  
Thermal Barrier ◽  
Temperature Oxidation ◽  
Barrier Coatings ◽  
Thermally Grown

This paper presents the results of an experimental study of the high-temperature isothermal oxidation behavior and micro-structural evolution in plasma sprayed thermal barrier coatings (TBCs) at temperatures between 900 and 1200 °C. Two types of specimens were produced for testing. These include a standard and vertically cracked (VC) APS. High temperature oxidation has been carried out at 900, 1000, 1100 and 1200 °C. The experiments have been performed in air under isothermal conditions. At each temperature, the specimens are exposed for 25, 50, 75 and 100 hours. The corresponding microstructures and microchemistries of the TBC layers are then examined using scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy EDS. Changes in the dimensions of the thermally grown oxide (TGO) layer are determined as functions of time and temperature. The evolution of bond coat microstructures/interdiffusion zones and thermally grown oxide (TGO) layers are compared in TBCs with standard (STD) and vertically cracked (VC) microstructures.

Sign in / Sign up

Export Citation Format

Share Document