Decision-directed phase noise compensation for millimeter-wave single carrier systems with iterative frequency-domain equalization

2010 ◽  
Vol 2 (3-4) ◽  
pp. 399-408 ◽  
Author(s):  
Satoshi Suyama ◽  
Junichi Onodera ◽  
Hiroshi Suzuki ◽  
Kazuhiko Fukawa

This paper proposes a receiver that repeats iterative frequency-domain equalization (FDE) and decision-directed phase noise compensation (DD-PNC) to alleviate degradation due to the phase noise for millimeter-wave single carrier (SC) systems. High bit-rate SC-FDE transceivers based on the single-chip Si RF-CMOS IC technology in the 60-GHz millimeter-wave band have been extensively studied for wireless personal area network (WPAN) systems, and the relatively large phase noise in a phase-locked loop (PLL) synthesizer severely degrades transmission performance. In an initial processing of the proposed receiver, a cyclic prefix (CP)-based phase noise compensator (CP-PNC) removes the phase noise from a time-domain received signal by using CP, which is known to the receiver, and the channel is equalized by the iterative FDE using the conventional minimum mean-square-error (MMSE) weight. In an iterative processing, DD-PNC estimates the phase noise each symbol by exploiting an output of a channel decoder, and then compensates the time-domain received signal for the phase noise by using the estimate. In order to equalize the compensated received signal, the iterative FDE performs both the MMSE filtering and residual inter-symbol interference cancelation using the decoder output. Computer simulations following the 60-GHz WPAN standard demonstrate that in the 64QAM with the coding rate of 3/4, the proposed receiver with three iterations can drastically remove the phase noise of −85 dBc/Hz at 1 MHz offset, and that it can achieve excellent transmission performance.

2018 ◽  
Vol 17 ◽  
pp. 03012
Author(s):  
Meng Zhang ◽  
Zhisong Bie

Feher-patented quadrature phase shift keying (fqpsk) modulation is proposed for single-carrier frequency domain equalization (sc-fde). this paper puts forward a new method modulation called cc-bcd-fqpsk. the fqpsk signal is oversampled to make that the discrete fourier transform (dft)/ inverse dft (idft) processing of it can be applied for sc-fde. the methodology for maintaining waveform continuity with a cyclic prefix (cp) is presented. wrap-around viterbi algorithm (wava) is suggested for demodulation after equalization at the receiver. simulation results show that sc-fde system based on cc-bcd-fqpsk modulation has higher spectral efficiency than linear modulation qpsk and is an effective approach for eliminating isi and using nonlinear high power amplifier.


Sign in / Sign up

Export Citation Format

Share Document