Radio Network Forensic with mmWave Using the Dominant Path Algorithm

For the last two decades, cybercrimes are growing on a daily basis. To track down cybercrimes and radio network crimes, digital forensic for radio networks provides foundations. The data transfer rate for the next-generation wireless networks would be much greater than today’s network in the coming years. The fifth-generation wireless systems are considering bands beyond 6 GHz. The network design of the next-generation wireless systems depends on propagation characteristics, frequency reuse, and bandwidth variation. This article declares the channel’s propagation characteristics of both line of sight (LoS) and non-LOS (NLoS) to construct and detect the path of rays coming from anomalies. The simulations were carried out to investigate the diffraction loss (DL) and frequency drop (FD). Indoor and outdoor measurements were taken with the omnidirectional circular dipole antenna with a transmitting frequency of 28 GHz and 60 GHz to compare the two bands of the 5th generation. Millimeter-wave communication comes with a higher constraint for implementing and deploying higher losses, low diffractions, and low signal penetrations for the mentioned two bands. For outdoor, a MATLAB built-in 3D ray tracing algorithm is used while for an indoor office environment, an in-house algorithmic simulator built using MATLAB is used to analyze the channel characteristics.

A Study on Propagation Models for 60 GHz Signals in Indoor Environments

The millimeter-waves band will enable multi-gigabit data transmission due to the large available bandwidth and it is a promising solution for the spectrum scarcity below 6 GHz in future generations of mobile networks. In particular, the 60 GHz band will play a crucial role in providing high-capacity data links for indoor applications. In this context, this tutorial presents a comprehensive review of indoor propagation models operating in the 60 GHz band, considering the main scenarios of interest. Propagation mechanisms such as reflection, diffraction, scattering, blockage, and material penetration, as well as large-scale path loss, are discussed in order to obtain a channel model for 60 GHz signals in indoor environments. Finally, comparisons were made using data obtained from a measurement campaign available in the literature in order to emphasize the importance of developing accurate channel models for future wireless communication systems operating in millimeter-waves bands.

Fusion Retrieval of Sea Surface Barometric Pressure from the Microwave Humidity and Temperature Sounder and Microwave Temperature Sounder-II Onboard the Fengyun-3 Satellite

Both the Microwave Humidity and Temperature Sounder (MWHTS) and the Microwave Temperature Sounder-II (MWTS-II) operate on the Fengyun-3 (FY-3) satellite platform, which provides an opportunity to retrieve the sea surface barometric pressure (SSP) with high accuracy by fusing the observations from the 60 GHz, 118.75 GHz, and 183.31 GHz channels. The theory of retrieving SSP using passive microwave observations is analyzed, and the sensitivity test experiments of MWHTS and MWTS-II to SSP as well as the test experiments of the contributions of MWHTS and MWTS-II to SSP retrieval are carried out. The theoretical channel combination is established based on the theoretical analysis, and the SSP retrieval experiment is carried out based on the Deep Neural Network (DNN) for the theoretical channel combination. The experimental results show that the retrieval accuracy of SSP using the theoretical channel combination is higher than that of MWHTS or MWTS-II. In addition, based on the test results of the contributions of MWHTS and MWTS-II to the retrieval SSP, the optimal theoretical channel combination can be built, and can further improve the retrieval accuracy of SSP from the theoretical channel combination.

An Overview of Higher Order Frequency Applications in Communication Systems

The principal reason for focusing on the higher band is the huge amount of allocated bandwidth around 60 GHz, which can be used to accommodate all kinds of short-range (< 1 km) wireless communication. In addition, 60 GHz front-end technology is emerging rapidly. In order to exploit the 60 GHz band efficiently, an overall network architecture should be worked out that gives the industry wide scope for product differentiation and 60 GHz system design should evolve guiding criteria such as affordability, modularity, scalability, expandability, interoperability and ergonomics.

IOT-5G USER TRACKING IN A 5G NETWORK USING 60 GHZ MM-WAVES BASED ON AN ABF-ED ALGORITHMS FOR A CLUTTERED INDOOR ENVIRONMENT

This paper presents a user tracking algorithm in an IoT-5G Network (or IoT-5GN). Hereby, we aim at studying and evaluating the sensing performances of the IoT-5G Access Point (or IoT-5G AP) primary signal by the IoT-5G user in a cluttered indoor environment using an energy detector (or ED) algorithm and an Alpha-&amp;-Beta Filter (ABF or α-β-F) estimator. The 5G primary signal (or 5G-PS) frequency that we would like to detect is: 60 GHz. As a result, the 5G-PS sensing via the proposed ABF-ED algorithm, enabled us to track the IoT-5G user inside of the IoT-5G AP coverage area. The performances of the proposed ABF-ED algorithm in this paper work is evaluated by the probability of total detection error (or PTDE) measure. Through different scenarios simulations, the performances and robustness of the proffered algorithm are demonstrated.

Design and Study of an mmWave Wearable Textile Based Compact Antenna for Healthcare Applications

In this study, the design of a compact and novel millimeter wave cotton textile-based wearable antenna for body-centric communications in healthcare applications is presented. The free space and on-body antenna performance parameters for the proposed antenna at 60 GHz are investigated and analyzed. The antenna is based on a 1.5 mm thick cotton substrate and has an overall dimension of 7.0 × 4.5 × 1.5 mm3. In free space, the antenna is resonant at 60 GHz and achieves a wide impedance bandwidth. The maximum gain at this resonant frequency is 6.74 dBi, and the radiation efficiency is 93.30%. Parametric changes were carried out to study the changes in the resonant frequency, gain, and radiation efficiency. For body-centric communications, the antenna was simulated at 5 different distances from a three-layer human torso-equivalent phantom. The radiation efficiency dropped by 24% and gradually increased with the gap distance. The antenna design was also analyzed by using 10 different textile substrates for both free space and on-body scenarios. The major benefits of the antenna are discussed as follows. Compared to a previous work, the antenna is very efficient, compact, and has a wide bandwidth. In BCWCs for e-health applications, the antenna needs to be very compact due to the longer battery life, and it has to have a wide bandwidth for high data rate communication. Since the antenna will be wearable with a sensor system, the shape of the antenna needs to be planar, and it is better to design the antenna on a textile substrate for integration into clothes. The antenna also needs to show high gain and efficiency for power-efficient communication. This proposed antenna meets all these criteria, and hence, it will be a good candidate for BCWCs in e-health applications.

Novel 60 GHz Band Spatial Synthetic Exposure Setup to Investigate Biological Effects of 5G and Beyond Wireless Systems on Human Body

The global spread of 5th generation (5G) wireless systems causes some concern about health effects of millimeter waves (MMW). To investigate biological effects of local exposure to 5G-MMW on human body, a novel 60 GHz band exposure setup was developed, and its performance was validated. A spatial synthetic beam-type exposure setup using two dielectric lens antennas was proposed to achieve high intensity 60 GHz irradiation to the target area of human skin. Variety distributions and intensities of electromagnetic fields at the exposed area, which is modified by incident angles of the combined beams, were simulated using finite-difference time-domain methods. The exposure performance we estimated was verified by temperature elevations of surface in a physical arm-shaped silicone phantom during the MMW exposure. The interference fringes generated in the exposed area due to the combined two-directional beam radiations were observed both in the simulation and in the phantom experiment but eliminated by applying an orthogonalizing polarized feeding structure. Under these exposure conditions, the local temperature changes, which could evoke warmth sensations, were obtained at the target area of the human forearm skin, which means the achievement of exposure performance we intended.