scholarly journals Electroassisted Filtration of Microfibrillated Cellulose: Insights Gained from Experimental and Simulation Studies

Author(s):  
Nabin Kumar Karna ◽  
Anna Lidén ◽  
Jakob Wohlert ◽  
Hans Theliander
1999 ◽  
Vol 15 (2) ◽  
pp. 91-98 ◽  
Author(s):  
Lutz F. Hornke

Summary: Item parameters for several hundreds of items were estimated based on empirical data from several thousands of subjects. The logistic one-parameter (1PL) and two-parameter (2PL) model estimates were evaluated. However, model fit showed that only a subset of items complied sufficiently, so that the remaining ones were assembled in well-fitting item banks. In several simulation studies 5000 simulated responses were generated in accordance with a computerized adaptive test procedure along with person parameters. A general reliability of .80 or a standard error of measurement of .44 was used as a stopping rule to end CAT testing. We also recorded how often each item was used by all simulees. Person-parameter estimates based on CAT correlated higher than .90 with true values simulated. For all 1PL fitting item banks most simulees used more than 20 items but less than 30 items to reach the pre-set level of measurement error. However, testing based on item banks that complied to the 2PL revealed that, on average, only 10 items were sufficient to end testing at the same measurement error level. Both clearly demonstrate the precision and economy of computerized adaptive testing. Empirical evaluations from everyday uses will show whether these trends will hold up in practice. If so, CAT will become possible and reasonable with some 150 well-calibrated 2PL items.


Author(s):  
Vinodhini M.

The objective of this paper is to develop a Direct Model Reference Adaptive Control (DMRAC) algorithm for a MIMO process by extending the MIT rule adopted for a SISO system. The controller thus developed is implemented on Laboratory interacting coupled tank process through simulation. This can be regarded as the relevant process control in petrol and chemical industries. These industries involve controlling the liquid level and the flow rate in the presence of nonlinearity and disturbance which justifies the use of adaptive techniques such as DMRAC control scheme. For this purpose, mathematical models are obtained for each of the input-output combinations using white box approach and the respective controllers are developed. A detailed analysis on the performance of the chosen process with these controllers is carried out. Simulation studies reveal the effectiveness of proposed controller for multivariable process that exhibits nonlinear behaviour.


2017 ◽  
Author(s):  
Akwasi Asamoah

<p>One sample of 1D bundle of cellulose microfibrils in the form of lignified flax fibre (0.10526 mm x 10 mm), and one 2D networks of cellulose microfibrils in the form of tunicate cellulose (0.07 mm x 5 mm x 10 mm), bacterial cellulose (0.135 mm x 5 mm x 10 mm) and microfibrillated cellulose (0.08 mm x 5 mm x 10 mm) were put on a glass slide parallel to the principal spectrometer axis. Raman spectra were measured all round in-plane under both half (in 5° steps) polarisation from 0° to 360° in extended mode between 100 cm<sup>-1</sup> and 1150 cm<sup>-1</sup> in 3 accumulations at 10s exposure and 100% laser power. The cursor was placed at the peak of the 1095 cm<sup>-1</sup> band, and intensity read.</p>


1986 ◽  
Author(s):  
Ernest Bauer ◽  
Frank A. Albini ◽  
Craig Chandler
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document