Modulation frequency wave generation by nonlinear interaction of high-power RF radiation

Radio Science ◽  
1982 ◽  
Vol 17 (3) ◽  
pp. 717-726
Author(s):  
K. J. Harker ◽  
F. W. Crawford
2002 ◽  
Vol 38 (22) ◽  
pp. 1376 ◽  
Author(s):  
H. Ito ◽  
T. Furuta ◽  
T. Ito ◽  
Y. Muramoto ◽  
K. Tsuzuki ◽  
...  

2007 ◽  
Vol 32 (19) ◽  
pp. 2885 ◽  
Author(s):  
Koji Suizu ◽  
Katsuhiko Miyamoto ◽  
Tomoyu Yamashita ◽  
Hiromasa Ito

2010 ◽  
Vol 28 (4) ◽  
pp. 531-537 ◽  
Author(s):  
R.P. Sharma ◽  
A. Monika ◽  
P. Sharma ◽  
P. Chauhan ◽  
A. Ji

AbstractThis paper presents an investigation of the excitation of a Tera hertz (THz) radiation by nonlinear interaction of a circularly polarized high power laser beam and density ripple in collisionless magneto plasma. The ponderomotive force due to the nonlinear interaction between the laser and density ripple generates a nonlinear current at a difference frequency. If the appropriate phase matching conditions are satisfied and the frequency of the ripple is appropriate, then this difference frequency can be brought in the THz range. Filamentation (self focusing) of a circularly polarized beam propagating along the direction of ambient magnetic field in plasma is first investigated within paraxial ray approximation. The beam gets focused when the initial power of the laser beam is greater than its critical power. Resulting localized beam couples with the pre-existing density ripple to produce a nonlinear current driving the THz radiation. Analytical expressions for the beam width of the laser beam, electric vector of the THz wave have been obtained. By changing the strength of the magnetic field, one can enhance or suppress the THz emission. For typical laser beam and plasma parameters with the incident laser power flux = 1014 W/cm2, laser beam radius (r0) = 40 µm, laser frequency (ω0) = 1014 rad/s and plasma density (n0) = 3 × 1018 cm−3, normalized ripple density amplitude (μ) = 0.3, the produced THz emission can be at the level of Giga watt in power.


2020 ◽  
Vol 26 (15-16) ◽  
pp. 1297-1308 ◽  
Author(s):  
Yi Liu ◽  
Yuxi Zheng ◽  
Ruiyin Song ◽  
Junhua Chen ◽  
Heng Jin

Wave maker is one of the most important experimental equipment in marine engineering. To meet the demands of simulation of higher wave amplitude and compare the effect of piston and flap type wave generation, a new wave generation device was proposed and a new piston and flap type wave maker with a rotary-valve-control vibrator was developed. A mathematical model of the new wave maker was established and analysed by Simulink, and a series of experiments were conducted on the wave maker to analyze wave generation characteristics. The results show that the wave maker can adjust the distance of wave paddle and generate different regular waves. The bigger the axial opening size of the valve port, the larger the wave paddle amplitude and the wave amplitude; the higher the pressure, the higher the wave paddle amplitude and the wave amplitude. High frequency wave making is more efficient than the lower one, and piston type wave making is more efficient than those wave makers that generate waves by flap type.


Sign in / Sign up

Export Citation Format

Share Document