scholarly journals H2-CO2 polymer electrolyte fuel cell that generates power while evolving CH4 at the Pt0.8Ru0.2/C cathode

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shofu Matsuda ◽  
Yuuki Niitsuma ◽  
Yuta Yoshida ◽  
Minoru Umeda

AbstractGenerating electric power using CO2 as a reactant is challenging because the electroreduction of CO2 usually requires a large overpotential. Herein, we report the design and development of a polymer electrolyte fuel cell driven by feeding H2 and CO2 to the anode (Pt/C) and cathode (Pt0.8Ru0.2/C), respectively, based on their theoretical electrode potentials. Pt–Ru/C is a promising electrocatalysts for CO2 reduction at a low overpotential; consequently, CH4 is continuously produced through CO2 reduction with an enhanced faradaic efficiency (18.2%) and without an overpotential (at 0.20 V vs. RHE) was achieved when dilute CO2 is fed at a cell temperature of 40 °C. Significantly, the cell generated electric power (0.14 mW cm−2) while simultaneously yielding CH4 at 86.3 μmol g−1 h−1. These results show that a H2-CO2 fuel cell is a promising technology for promoting the carbon capture and utilization (CCU) strategy.

2020 ◽  
Author(s):  
Shofu Matsuda ◽  
Yuuki Niitsuma ◽  
Yuta Yoshida ◽  
Minoru Umeda

Abstract Generating electric power using CO2 as a reactant is challenging because the electroreduction of CO2 usually requires a large overpotential. Herein, we report the design and development of a polymer electrolyte fuel cell driven by feeding H2 and CO2 to the anode (Pt/C) and cathode (Pt0.8Ru0.2/C), respectively, based on their theoretical electrode potentials. Pt-Ru/C is a promising electrocatalysts for CO2 reduction at a low overpotential; consequently, CH4 is continuously produced through CO2 reduction with an enhanced faradaic efficiency (18.2%) and without an overpotential (at 0.20 V vs. RHE) was achieved when dilute CO2 is fed at a cell temperature of 40 °C. Significantly, the cell generated electric power (0.14 mW·cm− 2) while simultaneously yielding CH4 at 86.3 µmol·g− 1·min− 1. These results show that a H2-CO2 fuel cell is a promising technology for promoting the carbon capture and utilization (CCU) strategy.


2014 ◽  
Vol 492 ◽  
pp. 365-369 ◽  
Author(s):  
Debanand Singdeo ◽  
Tapobrata Dey ◽  
Prakash C. Ghosh

In this work, a three dimensional, single channel model of high temperature polymer electrolyte fuel cell is simulated. The effect of operating temperature and doping on performance is evaluated for a single channel model. A good agreement is observed between the predicted results and experimental values. The experiments have been performed under similar conditions by operating a cell with phosphoric acid doped PBI membrane of active area 49 cm2. The results indicate that it is possible to obtain good performance in high temperature fuel cells by higher acid doping and operating at elevated temperature. The model has been conveniently implemented by customization of the material properties functions in the fuel cell module.


1996 ◽  
Author(s):  
V A Paganin ◽  
E A Ticianelli ◽  
E R Gonzalez

2021 ◽  
Vol 4 (3) ◽  
pp. 2307-2317
Author(s):  
Aki Kobayashi ◽  
Takahiro Fujii ◽  
Chie Harada ◽  
Eiichi Yasumoto ◽  
Kenyu Takeda ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document