Ti2N nitride MXene evokes the Mars-van Krevelen mechanism to achieve high selectivity for nitrogen reduction reaction

We address the low selectivity problem faced by the electrochemical nitrogen (N2) reduction reaction (NRR) to ammonia (NH3) by exploiting the Mars-van Krevelen (MvK) mechanism on two-dimensional (2D) Ti2N nitride MXene. NRR technology is a viable alternative to reducing the energy and greenhouse gas emission footprint from NH3 production. Most NRR catalysts operate by using an associative or dissociative mechanism, during which the NRR competes with the hydrogen evolution reaction (HER), resulting in low selectivity. The MvK mechanism reduces this competition by eliminating the adsorption and dissociation processes at the sites for NH3 synthesis. We show that the new class of 2D materials, nitride MXenes, evoke the MvK mechanism to achieve the highest Faradaic efficiency (FE) towards NH3 reported for any pristine transition metal-based catalyst—19.85% with a yield of 11.33 μg/cm2/hr at an applied potential of − 250 mV versus RHE. These results can be expanded to a broad class of systems evoking the MvK mechanism and constitute the foundation of NRR technology based on MXenes.

Visualisation and quantification of flooding phenomena in gas diffusion electrodes (GDEs) used for electrochemical CO2 reduction: A combined EDX/ICP–MS approach

The most promising strategy to up-scale the electrochemical CO2 reduction reaction (ec-CO2RR) is based on the use of gas diffusion electrodes (GDEs) that allow current densities close to the range of 1 A/cm2 to be reached. At such high current densities, however, the flooding of the GDE cathode is often observed in CO2 electrolysers. Flooding hinders the access of CO2 to the catalyst, and by thus leaving space for (unwanted) hydrogen evolution, it usually leads to a decrease of the observable Faradaic efficiency of CO2 reduction products. To avoid flooding as much as possible has thus become one of the most important aims of to-date ec-CO2RR engineering, and robust analytical methods that can quantitatively assess flooding are now in demand. As flooding is very closely related to the formation of carbonate salts within the GDE structure, in this paper we use alkali (in particular, potassium) carbonates as a tracer of flooding. We present a novel analytical approach —based on the combination of cross-sectional energy-dispersive X-ray (EDX) mapping and inductively coupled plasma mass spectrometry (ICP--MS) analysis— that can not only visualise, but can also quantitatively describe the electrolysis time dependent flooding in GDEs, leading to a better understanding of electrolyser malfunctions.

Green H2 Production by Water Electrolysis Using Cation Exchange Membrane: Insights on Activation and Ohmic Polarization Phenomena

Low-temperature electrolysis by using polymer electrolyte membranes (PEM) can play an important role in hydrogen energy transition. This work presents a study on the performance of a proton exchange membrane in the water electrolysis process at room temperature and atmospheric pressure. In the perspective of applications that need a device with small volume and low weight, a miniaturized electrolysis cell with a 36 cm2 active area of PEM over a total surface area of 76 cm2 of the device was used. H2 and O2 production rates, electrical power, energy efficiency, Faradaic efficiency and polarization curves were determined for all experiments. The effects of different parameters such as clamping pressure and materials of the electrodes on polarization phenomena were studied. The PEM used was a catalyst-coated membrane (Ir-Pt-Nafion™ 117 CCM). The maximum H2 production was about 0.02 g min−1 with a current density of 1.1 A cm−2 and a current power about 280 W. Clamping pressure and the type of electrode materials strongly influence the activation and ohmic polarization phenomena. High clamping pressure and electrodes in titanium compared to carbon electrodes improve the cell performance, and this results in lower ohmic and activation resistances.

Au aerogel for selective CO2 electroreduction to CO: ultrafast preparation with high performance

Noble metal aerogels (NMAs) have been used in a variety of (photo-)electrocatalytic reactions, but pure Au aerogels (AG) have not been used in CO2 electroreduction to date. To explore the potential application in this direction, AG was prepared to be used as the cathode in CO2 electroreduction to CO. However, the gelation time of NMAs is usually very long, up to several weeks. Here, an excess NaBH4 and turbulence mixing-promoted gelation approach was developed by introducing magnetic stirring as an external force field, which therefore greatly shortened the formation time of Au gels to several seconds. The AG-3 (AG with Au loading of 0.003 g) exhibited a high CO Faradaic efficiency (FE) of 95.6% at an extremely low overpotential of 0.39 V, and over 91% of CO FE was reached in a wide window of -0.4 ~ -0.7 V vs. the reversible hydrogen electrode (RHE). Partial current density in CO was measured to be -19.35 mA cm-2 at -0.8 V vs. RHE under 1 atm of CO2. The excellent performance should be ascribed to its porous structure, abundant active sites, and large electrochemical active surface area. It provides a new method for preparation of AG with ultrafast gelation time and large production at room temperature, and the resulting pure AG was for the first time used in the field of CO2 electroreduction.

Atomically Dispersed Fe-Co Bimetallic Catalysts for the Promoted Electroreduction of Carbon Dioxide

The electroreduction reaction of CO2 (ECO2RR) requires high-performance catalysts to convert CO2 into useful chemicals. Transition metal-based atomically dispersed catalysts are promising for the high selectivity and activity in ECO2RR. This work presents a series of atomically dispersed Co, Fe bimetallic catalysts by carbonizing the Fe-introduced Co-zeolitic-imidazolate-framework (C–Fe–Co–ZIF) for the syngas generation from ECO2RR. The synergistic effect of the bimetallic catalyst promotes CO production. Compared to the pure C–Co–ZIF, C–Fe–Co–ZIF facilitates CO production with a CO Faradaic efficiency (FE) boost of 10%, with optimal FECO of 51.9%, FEH2 of 42.4% at − 0.55 V, and CO current density of 8.0 mA cm−2 at − 0.7 V versus reversible hydrogen electrode (RHE). The H2/CO ratio is tunable from 0.8 to 4.2 in a wide potential window of − 0.35 to − 0.8 V versus RHE. The total FECO+H2 maintains as high as 93% over 10 h. The proper adding amount of Fe could increase the number of active sites and create mild distortions for the nanoscopic environments of Co and Fe, which is essential for the enhancement of the CO production in ECO2RR. The positive impacts of Cu–Co and Ni–Co bimetallic catalysts demonstrate the versatility and potential application of the bimetallic strategy for ECO2RR.

Insight into Composition and Intermediate Evolutions of Copper-Based Catalysts during Gas-Phase CO2 Electroreduction to Multicarbon Oxygenates

Conversion of CO2 to valuable chemicals driven by renewable electricity via electrocatalytic reduction processes is of great significance for achieving carbon neutrality. Copper-based materials distinguish themselves from other electrocatalysts for their unique capability to produce multicarbon compounds in CO2 electroreduction. However, the intrinsic active composition and C–C coupling mechanism of copper-based catalysts are still ambiguous. This is largely due to the absence of appropriate in situ approaches to monitor the complicated processes of CO2 electroreduction. Here, we adopted operando spectroscopy techniques, including Raman and infrared, to investigate the evolution of compositions and intermediates during gas-phase CO2 electroreduction on Cu foam, Cu2O nanowire and CuO nanowire catalysts. Although all the three copper-based catalysts possessed the activity of electroreducing gas-phase CO2 to multicarbon oxygenates, Cu2O nanowires showed the much superior performance with a 71.9% Faradaic efficiency of acetaldehyde. Operando Raman spectra manifested that the cuprous oxide remained stable during the whole gas-phase CO2 electroreduction, and operando diffuse reflectance infrared Fourier transform spectroscopy (DRFITS) results provide direct evidences of key intermediates and their evolutions for producing multicarbon oxygenates, in consistence with the density functional theory calculations.

The Importance of Molybdenum(IV) Active Sites in Promoting Electrochemical Reduction of N2 to NH3 with MoFe Bimetallic Catalysts

To overcome the low faradaic efficiency (FE) of single Mo or Fe based electrocatalysts in nitrogen reduction reactions (NRR) due to the competition from the hydrogen evolution reaction (HER), a series of bimetallic MoFe compound catalysts were prepared under an NH3 atmosphere through a facile precipitation-pyrolysis method. The formed tetravalent Mo was found to be capable of inducing better electronic interactions between the surface nitrogen species and the Fe metal groups, thus improving the FE. It was demonstrated that the prepared ternary MoFe-N catalyst exhibited a remarkable FE of 33.26 % and a high NH3 yield of 33.31 μg h-1 mg-1cat. for NRR, which was believed to have been caused by an obvious change in the valence of Mo that resulted in a lower HER activity. X-ray photoelectron spectroscopy analysis further revealed that thermal processing under an NH3 atmosphere formed the Mo(IV) active sites in Mo-N bond, which led to a significant suppression in HER activity. Finally, through the study of the surface hydrogenation mechanism, it was concluded that the synergistic effect of the adsorbed H* and Mo active sites was the main reason for the improved performance of NRR.

Linker modulated peroxide electrosynthesis using metal-organic nanosheets

The electrochemical synthesis of hydrogen peroxide (H2O2), a widely used oxidant, is emerging as a green alternative to the conventional anthraquinone method. In this work, Ni-based metal-organic nanosheet (Ni-MONs) catalysts constructed using a variety of linkers were studied as oxygen reduction catalysts. Using a host of analytical techniques, we reveal how modulating the terephthalic acid linker with hydroxy, amine, and fluorine groups impacts the resulting physical and electronic structure of the Ni catalytic sites. These changes further impact the selectivity for H2O2, with the Ni-Amine-MON reaching near 100% Faradaic efficiency at minimal overpotential for the 2e- H2O2 pathway in alkaline electrolyte. Finally, we translate the Ni-Amine-MON catalyst to a gas-diffusion reaction geometry and demonstrate a H2O2 partial current density of 200 mA/cm2 while maintaining 85% Faradaic efficiency. In all, this study puts forth a simple route to catalyst modulation for highly effective H2O2 electrosynthesis.