Deuterated N,N-dimethylformamide (DMF-d7) as An Additive to Enhance CsPbI3 Solar Cell Efficiency

Author(s):  
Youkui Xu ◽  
Yingtao Li ◽  
Yutian Lei ◽  
Qian Wang ◽  
Huanhuan Yao ◽  
...  

Typically, DMSO and DMF are the two most commonly used co-solvents, however, their boiling points differ greatly and the volatilization rate is not consistent when the film is annealed and...

2020 ◽  
pp. 114-119

Experimental and theoretical study Porphyrin-grafted ZnO nanowire arrays were investigated for organic/inorganic hybrid solar cell applications. Two types of porphyrin – Tetra (4-carboxyphenyle) TCPP and meso-Tetraphenylporphine (Zinc-TPP)were used to modify the nanowire surfaces. The vertically aligned nanowires with porphyrin modifications were embedded in graphene-enriched poly (3-hexylthiophene) [G-P3HT] for p-n junction nanowire solar cells. Surface grafting of ZnO nanowires was found to improve the solar cell efficiency. There are different effect for the two types of porphyrin as results of Zn existing. Annealing effects on the solar cell performance were investigated by heating the devices up to 225 °C in air. It was found that the cell performance was significantly degraded after annealing. The degradation was attributed to the polymer structural change at high temperature as evidenced by electrochemical impedance spectroscopy measurements.


Author(s):  
Martin A. Green ◽  
Ewan D. Dunlop ◽  
Jochen Hohl‐Ebinger ◽  
Masahiro Yoshita ◽  
Nikos Kopidakis ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1684
Author(s):  
Alessandro Romeo ◽  
Elisa Artegiani

CdTe is a very robust and chemically stable material and for this reason its related solar cell thin film photovoltaic technology is now the only thin film technology in the first 10 top producers in the world. CdTe has an optimum band gap for the Schockley-Queisser limit and could deliver very high efficiencies as single junction device of more than 32%, with an open circuit voltage of 1 V and a short circuit current density exceeding 30 mA/cm2. CdTe solar cells were introduced at the beginning of the 70s and they have been studied and implemented particularly in the last 30 years. The strong improvement in efficiency in the last 5 years was obtained by a new redesign of the CdTe solar cell device reaching a single solar cell efficiency of 22.1% and a module efficiency of 19%. In this paper we describe the fabrication process following the history of the solar cell as it was developed in the early years up to the latest development and changes. Moreover the paper also presents future possible alternative absorbers and discusses the only apparently controversial environmental impacts of this fantastic technology.


Author(s):  
Garner H. Fleming ◽  
Bennett T. Smith ◽  
Matthew G. Dickman ◽  
J. Shawn Addington ◽  
David L. Livingston

Author(s):  
Yacine Kouhlane ◽  
Djoudi Bouhafs ◽  
Abdelkader Guenda ◽  
Nacer-Eddine Demagh ◽  
Assia Guessoum ◽  
...  

2020 ◽  
Vol 2 (2) ◽  
Author(s):  
Pascal Kaienburg ◽  
Lisa Krückemeier ◽  
Dana Lübke ◽  
Jenny Nelson ◽  
Uwe Rau ◽  
...  

2020 ◽  
Vol 29 ◽  
pp. 8-14
Author(s):  
Manal Midhat Abdullah ◽  
Omar Adnan Ibrahim

Core-shell nanocrystals are utilized to improve vitality conversion efficiency of Si based solar cells. In the present work, a study of synthesis and characterization of photo luminescent, down-shifting, core-shell CdSe/CdS quantum dots is introduced. The QD,s absorb in the UV range (350nm) of the solar spectrum and emit photons with wavelengths centered at (574 nm). Calculated energy gap is (2.16 eV), which is well suited for Silicon absorption and electron-hole pair generation. The grain size is ranged between (1.814 and 3.456 nm). Results show that the cell efficiency is improved from (8.81%) (For a reference silicon solar cell) to (10.07%) (For a CdSe/CdS QD deposited directly on the surface of the solar cell). This improvement is referred to the spreading of the absorbed solar radiation over the spectral response of the Si solar cell.


Sign in / Sign up

Export Citation Format

Share Document