amine groups
Recently Published Documents


TOTAL DOCUMENTS

670
(FIVE YEARS 223)

H-INDEX

43
(FIVE YEARS 9)

2022 ◽  
Author(s):  
Courtney Ngai ◽  
Hoi-Ting Wu ◽  
Bryce da Camara ◽  
Christopher G. Williams ◽  
Leonard J. Mueller ◽  
...  
Keyword(s):  

2022 ◽  
Author(s):  
Guomin Wu ◽  
Jian Chen ◽  
Zhaozhe Yang ◽  
Can Jin ◽  
Guifeng Liu ◽  
...  

Abstract Due to the complex heterogeneous film forming process of two-component waterborne polyurethane (2K-WPU), the crosslinking reaction rate of 2K-WPU cannot meet the demand of efficient application in coatings. In order to improve the crosslinking reaction rate of 2K-WPU, a waterborne polyol containing tertiary amine groups was synthesized from rosin based epoxy resin and secondary amine compound, and then autocatalytic 2K-WPU was prepared by crosslinking the rosin based waterborne amino polyol with polyisocyanate. The structure of the polyol from rosin based epoxy resin was characterized with Fourier infrared (FT-IR) and nuclear magnetic resonance (NMR). The crosslinking kinetics and the crosslinked product of the rosin based waterborne amino polyol were also compared with a commercial acrylic polyol. It was shown from the results that the crosslinking reaction rate of the rosin based waterborne amino polyol was faster than that of the commercial acrylic polyol, which indicated the tertiary amine groups chemically bonded in the rosin based polyols could autocatalyze the crosslinking reaction of 2K-WPUs with catalysts free. The film of the rosin based waterborne amino polyol had excellent impact strength, adhesion, flexibility, hardness, gloss, fullness and solvent resistance, showing a good application prospect in the field of waterborne coatings.


Author(s):  
Courtney Ngai ◽  
Hoi-Ting Wu ◽  
Bryce da Camara ◽  
Christopher G. Williams ◽  
Leonard J. Mueller ◽  
...  
Keyword(s):  

Author(s):  
Lyudmila A. Kayukova ◽  
Elmira M. Yergaliyeva ◽  
Anna V. Vologzhanina

The reaction of β-(thiomorpholin-1-yl)propioamidoxime with tosyl chloride in CHCl3 in the presence of DIPEA when heated at 343 K for 8 h afforded the title hydrated salt, C7H14N3S+·Cl−·H2O, in 84% yield. This course of the tosylation reaction differs from the result of tosylation obtained for this substrate at room temperature, when only 2-amino-8-thia-1,5-diazaspiro[4.5]dec-1-ene-5-ammonium tosylate was isolated in 56% yield. The structure of the reaction product was established by physicochemical methods, spectroscopy, and X-ray diffraction. The single-crystal data demonstrated that the previously reported crystal structure of this compound [Kayukova et al. (2021). Chem. J. Kaz, 74, 21–31] had been refined in a wrong space group. In the extended structure, the chloride anions, water molecules and amine groups of the cations form two-periodic hydrogen-bonded networks with the fes topology.


2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Emilia Dzień ◽  
Dorota Dudek ◽  
Danuta Witkowska ◽  
Magdalena Rowińska-Żyrek

AbstractMembrane environment often has an important effect on the structure, and therefore also on the coordination mode of biologically relevant metal ions. This is also true in the case of Cu(II) coordination to amylin analogues—rat amylin, amylin1–19, pramlintide and Ac-pramlintide, which offer N-terminal amine groups and/or histidine imidazoles as copper(II) anchoring sites. Complex stabilities are comparable, with the exception of the very stable Cu(II)–amylin1–19, which proves that the presence of the amylin C-terminus lowers its affinity for copper(II); although not directly involved, its appropriate arrangement sterically prevents early metal binding. Most interestingly, in membrane-mimicking solution, the Cu(II) affinities of amylin analogues are lower than the ones in water, probably due to the crowding effect of the membrane solution and the fact that amide coordination occurs at higher pH, which happens most likely because the α-helical structure, imposed by the membrane-mimicking solvent, prevents the amides from binding at lower pH, requiring a local unwinding of the α-helix.


2021 ◽  
Vol 22 (24) ◽  
pp. 13570
Author(s):  
Takenori Satomura ◽  
Kohei Uno ◽  
Norio Kurosawa ◽  
Haruhiko Sakuraba ◽  
Toshihisa Ohshima ◽  
...  

Flavoenzyme dye-linked l-lactate dehydrogenase (Dye-LDH) is primarily involved in energy generation through electron transfer and exhibits potential utility in electrochemical devices. In this study, a gene encoding a Dye-LDH homolog was identified in a hyperthermophilic archaeon, Sulfurisphaera tokodaii. This gene was part of an operon that consisted of four genes that were tandemly arranged in the Sf. tokodaii genome in the following order: stk_16540, stk_16550 (dye-ldh homolog), stk_16560, and stk_16570. This gene cluster was expressed in an archaeal host, Sulfolobus acidocaldarius, and the produced enzyme was purified to homogeneity and characterized. The purified recombinant enzyme exhibited Dye-LDH activity and consisted of two different subunits (products of stk_16540 (α) and stk_16550 (β)), forming a heterohexameric structure (α3β3) with a molecular mass of approximately 253 kDa. Dye-LDH also exhibited excellent stability, retaining full activity upon incubation at 70 °C for 10 min and up to 80% activity after 30 min at 50 °C and pH 6.5–8.0. A quasi-direct electron transfer (DET)-type Dye-LDH was successfully developed by modification of the recombinant enzyme with an artificial redox mediator, phenazine ethosulfate, through amine groups on the enzyme’s surface. This study is the first report describing the development of a quasi-DET-type enzyme by using thermostable Dye-LDH.


2021 ◽  
Author(s):  
Daning Lang ◽  
Xia Xu ◽  
Ronglan Wu ◽  
WEI WANG ◽  
Ming Shi ◽  
...  

Abstract A cellulosic material could efficiently and selectively adsorb organic and inorganic contaminants from aqueous solutions without interference from competing adsorption sites. In this study, cellulose-graft-tetraethylenepentamin molecular imprinted polymer (C-TEPA-MIP) was synthesized by using 4-nitrophenol (4-NP) as the template. The C-TEPA-MIP adsorbent could adsorb 4-NP and Cr(VI) simultaneously and selectively, without being affected by the competitive adsorption sites of each of these pollutants. The adsorption of 4-NP was predominantly due to the imprinted sites of 4-NP in C-TEPA-MIP that were located inside of the adsorbent, whereas that of Cr(VI) was primarily due to the amine groups of TEPA found on the surface of the adsorbent. Compared with the non-imprint polymer synthesized without the template, C-TEPA-MIP showed higher selectivity for both 4-NP and Cr(VI) in unitary and binary systems. In addition, C-TEPA-MIP exhibited good stability and recyclability for 4-NP, which makes it a promising candidate material for applications concerning wastewater treatment.


Author(s):  
Maryam Jouyandeh ◽  
Mohammad Reza Ganjali ◽  
Mehdi Mehrpooya ◽  
Otman Abida ◽  
Karam Jabbour ◽  
...  

There was a question on “how lanthanides doping in iron oxide affects cure kinetics of epoxy-based nanocomposites?” To answer, we synthesized samarium (Sm)-doped Fe3O4 nanoparticles via electrochemical method and characterized it using FTIR, XRD, FE-SEM, EDX, TEM, and XPS analyses. The magnetic particles were uniformly dispersed in epoxy resin to increase the curability of the epoxy/amine system. The effect of the lanthanide dopant on the curing reaction of epoxy with amine was explored by modeling DSC experimental data based on model-free methodology. It was found that Sm3+ in the structure of Fe3O4 crystal participates in cross-linking of epoxy by catalyzing the reaction between epoxide rings and amine groups of curing agents. In addition, the etherification reaction of active OH groups on the surface of nanoparticles reacts with epoxy rings which prolongs the reaction time at the late stage of reaction where diffusion is the dominant mechanism.


2021 ◽  
Author(s):  
Emilia Dzień ◽  
Dorota Dudek ◽  
Danuta Witkowska ◽  
Magdalena Rowińska-Żyrek

Abstract Membrane environment often has an important effect on the structure, and therefore also on the coordination mode of biologically relevant metal ions.This is also true in the case of Cu(II) coordination to amylin analogues – rat amylin, amylin1-19, pramlintide and Ac-pramlintide, which offer N-terminal amine groups and/or histidine imidazoles as copper(II) anchoring sites. Complex stabilities are comparable, with the exception of the very stable Cu(II)-amylin1-19, which proves that the presence of the amylin C-terminus lowers its affinity for copper(II); although not directly involved, its appropriate arrangement sterically prevents early metal binding.Most interestingly, in membrane-mimicking solution, the Cu(II) affinities of amylin analogues are lower than the ones in water, probably due to the crowding effect of the membrane solution and the fact that amide coordination occurs at higher pH, which happens most likely because the α-helical structure, imposed by the membrane-mimicking solvent, prevents the amides from binding at lower pH, requiring a local unwinding of the α-helix.


Sign in / Sign up

Export Citation Format

Share Document