Theoretical or numerical progressive collapse analysis is necessary for important civil structures in case of unforeseen accidents. However, currently, most analytical research is carried out under the assumption of material elasticity for problem simplification, leading to the deviation of analysis results from actual situations. On this account, a progressive collapse analysis procedure for truss structures is proposed, based on the assumption of elastoplastic materials. A plastic importance coefficient was defined to express the importance of truss members in the entire system. The plastic deformations of members were involved in the construction of local and global stiffness matrices. The conceptual removal of a member was adopted, and the impact of the member loss on the truss system was quantified by bearing capacity coefficients, which were subsequently used to calculate the plastic importance coefficients. The member failure occurred when its bearing capacity arrived at the ultimate value, instead of the elastic limit. The extra bearing capacity was embodied by additional virtual loads. The progressive collapse analysis was performed by iterations until the truss became a geometrically unstable system. After that, the critical progressive collapse path inside the truss system was found according to the failure sequence of the members. Lastly, the proposed method was verified against both analytical and experimental truss structures. The critical progressive collapse path of the experimental truss was found by the failure sequence of damaged members. The experimental observation agreed well with the corresponding analytical scenario, proving the method feasibility.
Progressive Collapse Safety Evaluation of Truss Structures Considering Material Plasticity
