Quantitative Assessment of Construction Site Pollutant Emission and Dispersion

AEI 2019 ◽  
2019 ◽  
Author(s):  
Yi Chen ◽  
Daan Liang
Author(s):  
Sehee Han ◽  
Seunguk Na ◽  
Nam-Gi Lim

Since the life cycle of a building spans more than 50 years, studies of the environmental impacts in the construction industry have focused on reducing the energy consumption and greenhouse gas emissions during the operation and maintenance phase. The products of the construction industry are assembled using various building materials manufactured outside of the construction site. Consequently, it is essential that the manufactured building materials be transported to the construction site using various types of transportation methods. However, there is a lack of studies that assess the pollutant emissions of road transport while executing a construction project. The purpose of this study is to investigate the changes in the road pollutant emissions when the old diesel vehicles for transporting building materials are replaced according to enhanced pollutant emission regulations. In this study, we found that approximately 89, 64, 77, and 64% of NOx, VOC, PM, and CO, respectively, were emitted during transportation of building materials as a proportion of the emissions during the construction of the structure. The analyzed results also show that about 10, 35, 23, and 35% of NOx, VOC, PM, and CO, respectively, were generated from material transportation as a proportion of the emissions from finishing the work. It is expected that a reduction in pollutant emissions from transporting building materials of up to approximately 64, 39, 49, and 27% of NOx, VOC, PM, and CO, respectively, can be achieved when vehicles registered before 2003 are replaced with ones that adhere to the tightened regulations.


Author(s):  
Marek Sawicki ◽  
Mariusz Szóstak

Working at height, and especially on construction scaffolding, is one of the most accident-prone situations on a construction site. The article attempts to assess the state of threat of working on scaffolding on the basis of the proposed coefficients concerning the possibility of an occupational accident occurring. The article presents the analysis of 10 parameters, which were classified into three groups of factors that cause accidents: technical, organizational, and human factors. In order to assess the state of threat of working on scaffolding, partial hazard factors and a simplified and accurate factor of the state of threat of working were proposed. The coefficients were determined on the basis of the data collected from post-accidental control reports on occupational accidents occurring on scaffolding in the construction industry that took place in Poland in five voivodeships in the years 2008–2017, and also on the basis of the obtained results of research on 120 scaffoldings conducted in the years 2016–2018. Based on the determined factors, it was possible to determine the probability of an undesirable event, in other words, an occupational accident. In addition, the developed test method proposed numerical scales for assessing the state of threat of working on scaffolding. The form proposed in the article for assessing the state of threat of working on scaffolding, which was developed using a spreadsheet, can provide support for people managing work at workstations involving scaffolding, for example, construction directors, construction engineers, work managers, or construction managers.


2020 ◽  
Author(s):  
José‐Carlos Delgado‐González ◽  
Carlos‐de‐la Rosa Prieto ◽  
Nuria Vallejo‐Calcerrada ◽  
Diana‐Lucía Tarruela‐Hernández ◽  
Sandra Cebada‐Sánchez ◽  
...  

VASA ◽  
2017 ◽  
Vol 46 (5) ◽  
pp. 383-388 ◽  
Author(s):  
Henrik Christian Rieß ◽  
Anna Duprée ◽  
Christian-Alexander Behrendt ◽  
Tilo Kölbel ◽  
Eike Sebastian Debus ◽  
...  

Abstract. Background: Perioperative evaluation in peripheral artery disease (PAD) by common vascular diagnostic tools is limited by open wounds, medial calcinosis or an altered collateral supply of the foot. Indocyanine green fluorescent imaging (ICG-FI) has recently been introduced as an alternative tool, but so far a standardized quantitative assessment of tissue perfusion in vascular surgery has not been performed for this purpose. The aim of this feasibility study was to investigate a new software for quantitative assessment of tissue perfusion in patients with PAD using indocyanine green fluorescent imaging (ICG-FI) before and after peripheral bypass grafting. Patients and methods: Indocyanine green fluorescent imaging was performed in seven patients using the SPY Elite system before and after peripheral bypass grafting for PAD (Rutherford III-VI). Visual and quantitative evaluation of tissue perfusion was assessed in an area of low perfusion (ALP) and high perfusion (AHP), each by three independent investigators. Data assessment was performed offline using a specially customized software package (Institute for Laser Technology, University Ulm, GmbH). Slope of fluorescent intensity (SFI) was measured as time-intensity curves. Values were compared to ankle-brachial index (ABI), slope of oscillation (SOO), and time to peak (TTP) obtained from photoplethysmography (PPG). Results: All measurements before and after surgery were successfully performed, showing that ABI, TTP, and SOO increased significantly compared to preoperative values, all being statistically significant (P < 0.05), except for TTP (p = 0.061). Further, SFI increased significantly in both ALP and AHP (P < 0.05) and correlated considerably with ABI, TTP, and SOO (P < 0.05). Conclusions: In addition to ABI and slope of oscillation (SOO), the ICG-FI technique allows visual assessment in combination with quantitative assessment of tissue perfusion in patients with PAD. Ratios related to different perfusion patterns and SFI seem to be useful tools to reduce factors disturbing ICG-FI measurements.


Sign in / Sign up

Export Citation Format

Share Document