Analysis of a model of fuel cell - gas turbine hybrid power system for enhanced energy efficiency

2012 ◽  
Author(s):  
Rajnish K. Calay ◽  
Mohamad Y. Mustafa ◽  
Mohammad S. Virk ◽  
Mahmoud F. Mustafa
2010 ◽  
Vol 34 (8) ◽  
pp. 1040-1049
Author(s):  
Sae-Gin Oh ◽  
Tae-Woo Lim ◽  
Jong-Su Kim ◽  
Byung-Lea Kil ◽  
Sang-Kyun Park ◽  
...  

2013 ◽  
Vol 38 (11) ◽  
pp. 4748-4759 ◽  
Author(s):  
Dang Saebea ◽  
Yaneeporn Patcharavorachot ◽  
Suttichai Assabumrungrat ◽  
Amornchai Arpornwichanop

Volume 3 ◽  
2004 ◽  
Author(s):  
Tae Won Song ◽  
Jeong L. Sohn ◽  
Jae Hwan Kim ◽  
Tong Seop Kim ◽  
Sung Tack Ro ◽  
...  

Performance of a solid oxide fuel cell (SOFC) can be enhanced by converting thermal energy of its high temperature exhaust gas to mechanical power using a micro gas turbine (MGT). A MGT plays also an important role to pressurize and warm up inlet gas streams of the SOFC. Performance behavior of the SOFC is sensitively influenced by internal constructions of the SOFC and related to design and operating parameters. In case of the SOFC/MGT hybrid power system, internal constructions of the SOFC influence not only on the performance of the SOFC but also on the whole hybrid system. In this study, influence of performance characteristics of the tubular SOFC and its internal reformer on the hybrid power system is discussed. For this purpose, detailed heat and mass transfer with reforming and electrochemical reactions in the SOFC are mathematically modeled and their results are reflected to the performance analysis. Effects of different internal constructions of the SOFC system and design parameters such as current density, recirculation ratio, fuel utilization factor, and catalyst density in internal reformer on the system performance are investigated and, as a result, some guidelines for the choice of those parameters for optimum operations of the SOFC/MGT hybrid power system are discussed.


Author(s):  
Tae Won Song ◽  
Jeong L. Sohn ◽  
Jae Hwan Kim ◽  
Tong Seop Kim ◽  
Sung Tack Ro ◽  
...  

Solid oxide fuel cell / micro gas turbine (SOFC/MGT) hybrid power system has been theoretically demonstrated that it can achieve higher thermal efficiency than any other power generation systems. To understand performance characteristics of the SOFC/MGT hybrid power system, it is necessary to analyze sensitivities of operating and design parameters on its performance. In this study, a quasi-2D model for the mathematical modeling of a tubular type indirect internal reforming solid oxide fuel cell (IIR-SOFC) is proposed and applied to a performance analysis of a SOFC/MGT hybrid power system. Using this model, temperature distributions along the longitudinal direction of the IIR-SOFC, which cannot be predicted by the lumped model, are calculated. In addition, sensitivities of parameters governing fuel cell performance such as current density, fuel utilization factor, steam-carbon ratio and parameters governing gas turbine performance such as pressure ratio, turbine inlet temperature, adiabatic efficiencies of compressor/turbine, and heat exchange effectiveness of the recuperator on the performance of the SOFC/MGT hybrid power system are investigated. Results in this study show how a quasi-2D model can improve accuracy of the performance analysis and its implementation to the performance analysis with discussion about sensitivities of design and operating parameters to the performance of the SOFC/MGT hybrid power system.


Author(s):  
Paolo Pezzini ◽  
David Tucker ◽  
Alberto Traverso

A hardware-in-the-loop-simulation (HiLS) procedure for a direct-fired fuel cell turbine hybrid power system was evaluated for an integrated gasifier/fuel cell/turbine hybrid cycle (IGFC), implemented through the Hybrid Performance (Hyper) project at the National Energy Technology Laboratory, U.S. Department of Energy (NETL). The Hyper facility is designed to explore dynamic operation of hybrid systems and quantitatively characterize such transient behaviour. It is possible to model, test and evaluate the effects of different parameters on the design and operation of a gasifier/fuel cell/gas turbine hybrid system and quantify risk mitigation strategies. The previous implementation of emergency shut-down control strategies resulted in turbomachinery hardware failure. The primary linking event in these cases was compressor stall and surge resulting from the sudden loss of fuel during implementation of the standard double block and bleed strategy used during emergency failure. A new mitigation strategy involving automated ramps is proposed and described in detail to control the system from start-up to forced emergency shut-down. The control architecture shows how the virtual fuel cell model can be coupled to the real gas turbine safely, in all of stage of operations. The paper includes improvements to the emergency shutdown procedure, failure analyses, and the comparison of experimental data with previous results.


Sign in / Sign up

Export Citation Format

Share Document