Effects caused by the implementation of the area rule theory to the fuselage of a surveillance unmanned aerial vehicle using computational fluid dynamics methods

2020 ◽  
Author(s):  
Muhammad Agung Bramantya ◽  
Joseph Putra Nararya
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Unmanned Aerial Vehicle ◽  
Aerial Vehicle ◽  
Area Rule

A computational fluid dynamics investigation of subsonic wing designs for unmanned aerial vehicle application

2019 ◽  
Vol 233 (15) ◽  
pp. 5543-5552
Author(s):  
Z Siddiqi ◽  
JW Lee
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Aspect Ratio ◽  
Unmanned Aerial Vehicle ◽  
Wing Design ◽  
Ansys Fluent ◽  
High Lift ◽  
Aerial Vehicle ◽  
Computational Fluid Dynamics Simulations ◽  
Dynamics Simulations

The wing of an unmanned aerial vehicle, RQ-7 Shadow, is modified to study the changes in the aerodynamics of the wing. The main focus is to investigate the effects of changing the components of wing design when the aircraft climbs and accelerates. These component modifications included changing the airfoil, planform, aspect ratio, and adding a winglet. Another objective is to study the efficacy of employing high-lift airfoils like the EPPLER 559 for subsonic unmanned aerial vehicle applications. For this, five wing designs are considered in this paper. Computational fluid dynamics simulations using ANSYS FLUENT® are conducted for each wing design. The C L /C D ratios for all the wings are calculated at increasing angles of attack (simulating Climbing) and increasing speed (simulating Acceleration). Compared to the NACA 4415 airfoil, which is utilized by the RQ-7 Shadow, the EPPLER 559 provides an increase in lift at the low angles of attack, but yields less of these benefits as the angle of attack increases. The tapered planform significantly reduces the high drag associated with the EPPLER 559 airfoil. The generation of higher lift forces with lower drag is further achieved by increasing the aspect ratio and through the addition of a winglet. When compared to the NACA 4415 airfoil, it is concluded that the EPPLER 559 airfoil is a viable candidate for subsonic unmanned aerial vehicle applications only when the components of wing design are altered. The performance of the wings that employ the EPPLER 559 airfoil improves when the planform is changed from rectangular to tapered, when the aspect ratio is increased and when a winglet is added.

scholarly journals A comparative pressure analysis of air flow between horizontal and V-Tail of UAV MALE of NACA0012H with speed variation

2018 ◽  
Vol 154 ◽  
pp. 01115
Author(s):  
Rahmat Riza ◽  
Dicky Kurniawan ◽  
Arif Budi Wicaksono
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Unmanned Aerial Vehicle ◽  
Air Flow ◽  
Leading Edge ◽  
Trailing Edge ◽  
Speed Variation ◽  
Aerial Vehicle ◽  
Long Endurance ◽  
Pressure Analysis

NACA0012H is an airfoil type that could be used for Unmanned Aerial Vehicle Medium Altitude Long Endurance. This experiment was used to analyze stress in the surface of Tail of UAV MALE that was caused by air flow. The experiment was conducted using Computational Fluid Dynamics Software. Two designs of tail, horizontal and V-tail, were considered to simulate pressure occurred on the surface of leading edge, chamber and trailing edge. The simulation was developed varying the speed of the UAV MALE. The results showed that pressure occurred on the surface of horizontal tail higher than pressure on the V-tail.

Sea-unammned aerial vehicle takeoff characteristics analysis method based on approximate equilibrium hypothesis

2018 ◽  
Vol 233 (3) ◽  
pp. 916-927 ◽  
Author(s):  
Dongli Ma ◽  
Zhi Li ◽  
Muqing Yang ◽  
Yang Guo ◽  
Haode Hu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Unmanned Aerial Vehicle ◽  
Interpolation Method ◽  
Design Stage ◽  
Approximate Equilibrium ◽  
Characteristics Analysis ◽  
Aerial Vehicle ◽  
Computational Fluid Dynamics Simulations ◽  
Dynamics Simulations

In this paper, transient multiphase flow computational fluid dynamics simulations based on volume of fluid model are conducted for a sea-unmanned aerial vehicle. The approximate equilibrium hypothesis is implemented after estimating the acceleration in the vertical direction. The complete configuration model and hull model are employed in simulation to predict the aerodynamic and hydrodynamic forces separately for different demands of aerodynamic and hydrodynamic computational fluid dynamics predictions and computing efficiency. In takeoff characteristics analysis, the computational fluid dynamics simulations are conducted as inputs for piecewise interpolation method. The calculated results show that the sea-unmanned aerial vehicle takeoff characteristics are totally different from a conventional aircraft. The drag-peak at hump speed is the obvious feature of the sea-unmanned aerial vehicle/seaplane. In most cases, if a sea-unmanned aerial vehicle will takeoff successfully as long as it can pass the drag peak. The takeoff distance and time calculated by piecewise interpolation method match the experimental data within 7% deviation. The accuracy is acceptable for conceptual design stage of a sea-unmanned aerial vehicle/seaplane. The results are applicable to consultation in choosing takeoff field or choosing powerplant.

scholarly journals A new nonlinear lifting line method for aerodynamic analysis and deep learning modeling of small unmanned aerial vehicles

2021 ◽  
Vol 13 ◽  
pp. 175682932110168
Author(s):  
Hasan Karali ◽  
Gokhan Inalhan ◽  
M Umut Demirezen ◽  
M Adil Yukselen
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Deep Learning ◽  
Unmanned Aerial Vehicles ◽  
Aerial Vehicles ◽  
Aerial Vehicle ◽  
Computationally Intensive ◽  
Lifting Line ◽  
Lifting Line Method ◽  
Nonlinear Aerodynamic

In this work, a computationally efficient and high-precision nonlinear aerodynamic configuration analysis method is presented for both design optimization and mathematical modeling of small unmanned aerial vehicles. First, we have developed a novel nonlinear lifting line method which (a) provides very good match for the pre- and post-stall aerodynamic behavior in comparison to experiments and computationally intensive tools, (b) generates these results in order of magnitudes less time in comparison to computationally intensive methods such as computational fluid dynamics. This method is further extended to a complete configuration analysis tool that incorporates the effects of basic fuselage geometries. Moreover, a deep learning based surrogate model is developed using data generated by the new aerodynamic tool that can characterize the nonlinear aerodynamic performance of unmanned aerial vehicles. The major novel feature of this model is that it can predict the aerodynamic properties of unmanned aerial vehicle configurations by using only geometric parameters without the need for any special input data or pre-process phase as needed by other computational aerodynamic analysis tools. The obtained black-box function can calculate the performance of an unmanned aerial vehicle over a wide angle of attack range on the order of milliseconds, whereas computational fluid dynamics solutions take several days/weeks in a similar computational environment. The aerodynamic model predictions show an almost 1-1 coincidence with the numerical data even for configurations with different airfoils that are not used in model training. The developed model provides a highly capable aerodynamic solver for design optimization studies as demonstrated through an illustrative profile design example.

scholarly journals Conceptual Design of an Unmanned Fixed-Wing Aerial Vehicle Based on Alternative Energy

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Alan G. Escobar-Ruiz ◽  
Omar Lopez-Botello ◽  
Luis Reyes-Osorio ◽  
Patricia Zambrano-Robledo ◽  
Luis Amezquita-Brooks ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Solar Cells ◽  
Conceptual Design ◽  
Alternative Energy ◽  
Dynamics Analysis ◽  
Preliminary Design ◽  
Aerodynamic Analysis ◽  
Computational Fluid Dynamics Analysis ◽  
Aerial Vehicle

This paper focuses on the aerodynamics and design of an unmanned aerial vehicle (UAV) based on solar cells as a main power source. The procedure includes three phases: the conceptual design, preliminary design, and a computational fluid dynamics analysis of the vehicle. One of the main disadvantages of an electric UAV is the flight time; in this sense, the challenge is to create an aerodynamic design that can increase the endurance of the UAV. In this research, the flight mission starts with the attempt of the vehicle design to get at the maximum altitude; then, the UAV starts to glide and battery charge recovery is achieved due to the solar cells. A conceptual design is used, and the aerodynamic analysis is focused on a UAV as a gliding vehicle, with the calculations starting with the estimation of weight and aerodynamics and finishing this stage with the best glide angle. In fact, the aerodynamic analysis is obtained for a preliminary design; this step involves the wing, fuselage, and empennage of the UAV. In order to achieve the preliminary design, an estimation of aerodynamic coefficients, along with computational fluid dynamics analysis, is performed.

Three Unstructured Computational Fluid Dynamics Studies on Generic Unmanned Combat Aerial Vehicle

2012 ◽  
Vol 49 (6) ◽  
pp. 1619-1637 ◽  
Author(s):  
Neal T. Frink ◽  
Magnus Tormalm ◽  
Stefan Schmidt
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Aerial Vehicle
Sign in / Sign up

Export Citation Format

Share Document