The production of rubber modified thermoplastics can exceed rates of 30,000 pounds per hour. If a production plant needs to equilibrate or has an upset, that means operating costs and lost revenue. Results of transmission electron microscopy (TEM) can be used for process adjustments to minimize product loss. Conventional TEM, however, is not a rapid turnaround technique. The TEM process was examined, and it was determined that 50% of the time it took to complete a polymer sample was related to film processing, even when using automated equipment. By replacing the conventional film portion of the process with a commercially available system to digitally acquire the TEM image, a production plant can have the same TEM image in the control room within 1.5 hours of sampling.A Hitachi H-600 TEM Operated at 100 kV with a tungsten filament was retrofitted with a SEMICAPS™ image collection and processing workstation and a KODAK MEGAPLUS™ charged coupled device (CCD) camera (Fig. 1). Media Cybernetics Image-Pro Plus software was included, and connections to a Phaser II SDX printer and the network were made. Network printers and other PC and Mac software (e.g. NIH Image) were available. By using digital acquisition and processing, the time it takes to produce a hard copy of a digital image is greatly reduced compared to the time it takes to process film.
Techno-economic evaluation of residue exhaustion in batch rectification ethanol production plant