In order to improve the mechanical properties of basalt fiber/epoxy composites, carboxylic CNTs were filled into the epoxy matrix of basalt fiber/epoxy composites. Firstly, the carboxylic CNTs filled epoxy composites with different carboxylic CNTs content were studied. Quasi-static and dynamic compression results show that when the content of carboxylic CNTs increased from 0wt% to 1wt%, both ultimate quasi-static and dynamic compressive strength of CNTs filled epoxy composites showed increasing tendencies. However when the content of carboxylic CNTs increased from 1 wt% to 1.5 wt% both ultimate quasi-static and dynamic compressive had decreasing tendencies. Base on above results, carboxylic CNTs (1wt%) filled basalt fiber/epoxy composites were fabricated by mould pressing method. Quasi-static and dynamic compression results showed that both ultimate quasi-static and ultimate dynamic compressive strength of carboxylic CNTs filled basalt fiber/epoxy composite were enhanced compared with those of basalt fiber/epoxy composites without CNTs. However, the critical failure strain were all lower than those of basalt fiber/epoxy composites without CNTs. Failure mechanism analysis showed that the carboxylic CNTs was beneficial for forming good interfacial bonding between epoxy matrix and basalt fibers, and the advantage of high axial tensile strength of basalt fibers could be fully utilized, which is responsible for the enhanced ultimate compressive strength of carboxylic CNTs filled basalt fiber/epoxy composites.
Dynamic compression behavior of waste glass powder concrete at high strain rate