In recent years, due to the increased fossil fuel costs and environmental concerns, there has been a renewed interest in absorption cooling (using low-grade heat source) systems for refrigeration and space cooling applications. Although, the stand-alone coefficient of performance (COP) is a concern with such systems, absorption cooling can be a useful add-on that improves the overall efficiency of conventional vapor compression cooling cycle. A local company based in Las Vegas which is involved in the development of advanced HVAC technologies, has developed a natural gas fueled internal combustion (IC) engine driven heat pump. This system recovers the rejected heat from the IC engine during the heating cycle, thus, increasing the heat delivered and improving the system’s overall efficiency. However, during the cooling cycle the rejected heat is dissipated to the ambient air through radiators. The overall efficiency of the system can be improved if the heat rejected during the cooling cycle can be recovered and used for space cooling or refrigeration applications. In this study, a vapor compression refrigeration system coupled with an absorption cooling system is simulated using MATLAB. The vapor compression system is driven by a natural gas fueled IC engine and the waste heat from the engine is used to drive the absorption cooling system. The waste heat is recovered both from gas exhaust and engine cooling systems. The developed simulation model is used to find the transients of both the vapor absorption and compressions systems for varied cooling demands. Important parameters such as coolant temperature and exhaust gas temperature are obtained from experimental data. This paper presents the most efficient load distribution between the vapor compression and absorption cooling systems.
Study on Libr/H2O absorption cooling system based on enhanced geothermal system for data center
