scholarly journals Research on Shear Lag Effect of Three-span Continuous Curved Steel Box Girder Bridge

2019 ◽  
Vol 611 ◽  
pp. 012050
Author(s):  
Kongliang Chen ◽  
Liankun Wang ◽  
Wenzhi Zhang
Keyword(s):  
Shear Lag ◽  
Shear Lag Effect ◽  
Box Girder ◽  
Steel Box Girder ◽  
Lag Effect ◽  
Box Girder Bridge ◽  
Girder Bridge ◽  
Steel Box Girder Bridge ◽  
Curved Steel

Study on the Shear Lag Effect of the PC Box Girder Bridge with Corrugated Steel Webs under Concentrated Loads

2014 ◽  
Vol 644-650 ◽  
pp. 5054-5060
Author(s):  
Rui Juan Jiang ◽  
Yu Feng Xiao ◽  
Xiao Wei Yi ◽  
Qi Ming Wu ◽  
Wei Ming Gai
Keyword(s):  
Shear Lag ◽  
Shear Lag Effect ◽  
Element Analysis ◽  
Box Girder ◽  
Current Time ◽  
Lag Effects ◽  
Lag Effect ◽  
Box Girder Bridge ◽  
Girder Bridge ◽  
Effective Flange Width

There are few studies about the shear lag effect and the effective flange width of the PC (Prestressed Concrete) box girder bridge with corrugated steel webs throughout the world in current time. In the present paper, based on the three-dimensional finite element analysis for a long-span continuous PC box girder bridge with corrugated steel webs and the corresponding conventional box girder bridge with concrete webs, a comparative study on the shear lag effect under vertical loads are carryied out together with the analyslis on the coefficient of the effective flange width. The results show that in the PC box girder with corrugated steel webs, the transverse distributions of longitudinal normal stress on the section of the slabs are obviousely non-uniform and they are different with those in the conventional PC box girder with concrete webs. And moreover, the shear lag effects in top slab of the PC box girder with corrugated steel webs are almost less obvious than those of the conventional PC box girder with concrete webs. However, the shear lag effects in bottom slab of the PC box girder with corrugated steel webs are almost similar to those of the conventional PC box girder with concrete webs, no matter what kind of vertical bending moment the cross section is subjected to

Study on Shear Lag Effect of a PC Box Girder Bridge with Corrugated Steel Webs under Self Weight

2014 ◽  
Vol 638-640 ◽  
pp. 1092-1098 ◽  
Author(s):  
Rui Juan Jiang ◽  
Qi Ming Wu ◽  
Yu Feng Xiao ◽  
Xiao Wei Yi ◽  
Wei Ming Gai
Keyword(s):  
Bending Moment ◽  
Shear Lag ◽  
Shear Lag Effect ◽  
Element Analysis ◽  
Box Girder ◽  
Lag Effect ◽  
Box Girder Bridge ◽  
Girder Bridge ◽  
Effective Flange Width ◽  
Width Coefficient

In the present paper, based on the three-dimensional finite element analysis for a three-span continuous PC box girder bridge with corrugated steel webs and the corresponding conventional box girder bridge with concrete webs, a comparative study on the shear lag effect under self-weight is carryied out together with the analyslis on the coefficient of the effective flange width. The results show that At the sections in the negative bending moment near the intermediate piers, the shear lag effect in the bridge with corrugated steel webs is more obvious than that in the bridge with concrete webs by 8%; and the corresponding effective flange width coefficient in the bridge with corrugated steel webs is even smaller than 0.9, so the shear lag effect at these sections should be considered in the design of this type of bridges. At the mid-span section of the middle span of a three-span continuous bridge either with corrugated steel webs or concrete webs, the shear lag effect can be omitted since the corresponding effective flange width coefficient there is close to 1.0.

Sign in / Sign up

Export Citation Format

Share Document