scholarly journals Crystallization Stages of the Bishop Tuff Magma Body Recorded in Crystal Textures in Pumice Clasts

2012 ◽  
Vol 53 (3) ◽  
pp. 589-609 ◽  
Author(s):  
Ayla S. Pamukcu ◽  
Guilherme A. R. Gualda ◽  
Alfred T. Anderson
Keyword(s):  
Author(s):  
Guilherme A. R. Gualda ◽  
David L. Cook ◽  
Rahul Chopra ◽  
Liping Qin ◽  
Alfred T. Anderson ◽  
...  

ABSTRACTThe Bishop Tuff (USA) is a large-volume, high-silica pyroclastic rhyolite. Five pumice clasts from three early stratigraphic units were studied. Size distributions were obtained using three approaches: (1) crushing, sieving and winnowing (reliable for crystals >100 μm); (2) microscopy of ∼1 mm3 fragments (preferable for crystals <100 μm); and (3) computerised X-ray microtomography of ∼1 cm3 pumice pieces.Phenocryst fragments coated with glass are common, and the size distributions for all crystals are concave-upward, indicating that crystal fragmentation is an important magmatic process.Three groups are recognised, characterised by: (1) high-density (0·759–0·902 g cm−3), high-crystal content (14·4–15·3 wt.%) and abundant large crystals (>800 μm); concave-downward size distributions for whole crystals indicate late-stage growth with limited nucleation, compatible with the slow cooling of a large, gas-saturated, stably stratified magma body; (2) low-density (0·499 g cm −3), low-crystal content (6·63 wt.%) and few large crystals; the approximately linear size distribution reveals that nucleation was locally important, perhaps close to the walls; and (3) intermediate characteristics in all respects.The volumetric fraction of bubbles inversely correlates with the number of large crystals. This is incompatible with isobaric closed-system crystallisation, but can be explained by sinking of large crystals and rise of bubbles in the magma


2013 ◽  
Vol 166 (3) ◽  
pp. 755-775 ◽  
Author(s):  
Guilherme A. R. Gualda ◽  
Mark S. Ghiorso

Author(s):  
James E. Gardner ◽  
Kenneth S. Befus ◽  
Guilherme A. R. Gualda ◽  
Mark S. Ghiorso
Keyword(s):  

2021 ◽  
Author(s):  
◽  
Katy Jane Chamberlain

<p>The Bishop Tuff is the product of one of the largest eruptions on Earth in the last 1 Myr. This thesis studies the Bishop Tuff in order to better understand the nature of the pre-eruptive magma body, with an emphasis on the processes that occurred within it and the timescales over which they operated. In situ geochemical analyses of crystals and glass from samples collected throughout the Bishop Tuff stratigraphic succession yields insights into the nature of zoning and mixing within this supervolcanic system. Timescales for zircon growth (inferred to represent longevity of the magma chamber) are investigated using U-Pb dating of zircons. Zircon textural and trace element data obtained by SIMS (SHRIMP-RG) are presented from 15 stratigraphically controlled Bishop Tuff samples and two older Glass Mountain (GM) lava samples. The resulting eruption age estimate derived from the weighted mean of 166 rim ages of 766.6±3.1 ka (95% confidence) is identical within uncertainty to published values from ID-TIMS and 40Ar/39Ar techniques. An eruption age is also derived for GM dome YA (the youngest GM dome) of 862±23 ka (95% confidence), significantly older than the widely used 790±20 ka K-Ar age. The oldest zircon cores from late-erupted Bishop material (including those with GM-type textures) have a weighted mean of 838.5±8.8 ka (95% confidence), implying that the Bishop Tuff system was only active for ~80 kyr, and had effectively no temporal overlap with the GM system. Bishop zircon textures are divided into four suites whose proportions change systematically through the eruptive sequence. Trace element variations in Bishop zircons are influenced strongly by sector zoning for many elements, and thus restrict the value of trace element variations in discerning compositional stratification within the magma chamber. In later-erupted units, bright-rim overgrowths are common, and are inferred to have crystallized from the same „bright-rim‟ magma as generated the contrasting rims seen in CL or BSE imaging on quartz, feldspar and orthopyroxene. From zircon zonation patterns, this less-evolved, slightly hotter magma invaded deeper parts of the chamber represented in the late-erupted northern units possibly up to ~10 kyr prior to eruption. In order to better quantify the timescales of interaction with the „bright-rim‟ magma, two-feldspar thermometry data are presented on multiple Bishop Tuff samples to constrain temperature variations within the pre-eruptive magma body and yield values for diffusion modelling. Two-feldspar thermometry agrees well with published Fe–Ti-oxide thermometry and reveals a ~80 °C uniform thermal gradient between the upper and lower regions of the magma chamber. Using this thermometry, diffusion of Ti in quartz, Ba in sanidine, Sr in sanidine and Fe-Mg interdiffusion in orthopyroxene are modelled to estimate timescales for the formation of overgrowth rims on crystals. Ti in quartz and Fe-Mg in orthopyroxene diffusion both yield timescales of <150 years for the formation of overgrowth rims, although differing by about an order of magnitude in their timing. However, Ba and Sr diffusion modelling in sanidine yields disparate timescales 1-2 orders of magnitude longer than for Ti in quartz. The main cause for this discrepancy is inferred to be an incorrect assumption for the initial profile shape for Ba and Sr diffusion modelling (i.e. the profile is influenced by growth zoning). Using the comparison with Sr, constraints are placed on the initial width of the core-rim interface and the initial conditions can be refined, bringing Ba and Sr diffusion timescales into mutual alignment and closer to the values from Ti in quartz. This modelling shows that piecemeal rejuvenation of lower Bishop Tuff magma chamber occurred over a period of ~500 years leading up to eruption. In situ major and trace element analyses of sanidine, plagioclase, biotite, orthopyroxene, clinopyroxene, zircon and matrix glass from the Bishop Tuff and two GM lavas are presented to investigate the pre-eruptive stratification of the Bishop magma chamber and its chemical relationship to the GM system. Analyses of samples from the entire Bishop stratigraphy confirm that the magma chamber was thermally and compositionally zoned prior to growth of crystals and the intrusion of the „bright-rim‟ forming magma. Study of rare mixed swirly and dacitic pumice samples shows enrichments in Ba, Sr and Ti (the elements responsible for bright-rim overgrowths in phenocryst phases) and identifies these pumices as possible representatives of the „bright-rim‟ magma. This integrated study of phenocrysts and glass from the Bishop Tuff leads to development of a revised magma chamber model, in which there is a unitary chamber with a stepped or sloping roof. The chamber has an upper, volumetrically dominant (~2/3) part showing no evidence for convection and with unzoned crystals, and a lower part which had experienced mixing of crystals and interaction with the „bright-rim‟ magma. Intrusion of the „bright-rim‟ magma introduced orthopyroxene and dominantly bright zircon crystals, and caused overgrowth of bright rims enriched in Ti, Sr and Ba on sanidine and quartz phenocrysts. Chemical compositions of GM and Bishop Tuff materials show a shared consanguinity, implying common modes of magma generation, yet the generation of GM and Bishop eruptible magma bodies were physically and temporally separate events.</p>


2021 ◽  
Author(s):  
◽  
Katy Jane Chamberlain

<p>The Bishop Tuff is the product of one of the largest eruptions on Earth in the last 1 Myr. This thesis studies the Bishop Tuff in order to better understand the nature of the pre-eruptive magma body, with an emphasis on the processes that occurred within it and the timescales over which they operated. In situ geochemical analyses of crystals and glass from samples collected throughout the Bishop Tuff stratigraphic succession yields insights into the nature of zoning and mixing within this supervolcanic system. Timescales for zircon growth (inferred to represent longevity of the magma chamber) are investigated using U-Pb dating of zircons. Zircon textural and trace element data obtained by SIMS (SHRIMP-RG) are presented from 15 stratigraphically controlled Bishop Tuff samples and two older Glass Mountain (GM) lava samples. The resulting eruption age estimate derived from the weighted mean of 166 rim ages of 766.6±3.1 ka (95% confidence) is identical within uncertainty to published values from ID-TIMS and 40Ar/39Ar techniques. An eruption age is also derived for GM dome YA (the youngest GM dome) of 862±23 ka (95% confidence), significantly older than the widely used 790±20 ka K-Ar age. The oldest zircon cores from late-erupted Bishop material (including those with GM-type textures) have a weighted mean of 838.5±8.8 ka (95% confidence), implying that the Bishop Tuff system was only active for ~80 kyr, and had effectively no temporal overlap with the GM system. Bishop zircon textures are divided into four suites whose proportions change systematically through the eruptive sequence. Trace element variations in Bishop zircons are influenced strongly by sector zoning for many elements, and thus restrict the value of trace element variations in discerning compositional stratification within the magma chamber. In later-erupted units, bright-rim overgrowths are common, and are inferred to have crystallized from the same „bright-rim‟ magma as generated the contrasting rims seen in CL or BSE imaging on quartz, feldspar and orthopyroxene. From zircon zonation patterns, this less-evolved, slightly hotter magma invaded deeper parts of the chamber represented in the late-erupted northern units possibly up to ~10 kyr prior to eruption. In order to better quantify the timescales of interaction with the „bright-rim‟ magma, two-feldspar thermometry data are presented on multiple Bishop Tuff samples to constrain temperature variations within the pre-eruptive magma body and yield values for diffusion modelling. Two-feldspar thermometry agrees well with published Fe–Ti-oxide thermometry and reveals a ~80 °C uniform thermal gradient between the upper and lower regions of the magma chamber. Using this thermometry, diffusion of Ti in quartz, Ba in sanidine, Sr in sanidine and Fe-Mg interdiffusion in orthopyroxene are modelled to estimate timescales for the formation of overgrowth rims on crystals. Ti in quartz and Fe-Mg in orthopyroxene diffusion both yield timescales of <150 years for the formation of overgrowth rims, although differing by about an order of magnitude in their timing. However, Ba and Sr diffusion modelling in sanidine yields disparate timescales 1-2 orders of magnitude longer than for Ti in quartz. The main cause for this discrepancy is inferred to be an incorrect assumption for the initial profile shape for Ba and Sr diffusion modelling (i.e. the profile is influenced by growth zoning). Using the comparison with Sr, constraints are placed on the initial width of the core-rim interface and the initial conditions can be refined, bringing Ba and Sr diffusion timescales into mutual alignment and closer to the values from Ti in quartz. This modelling shows that piecemeal rejuvenation of lower Bishop Tuff magma chamber occurred over a period of ~500 years leading up to eruption. In situ major and trace element analyses of sanidine, plagioclase, biotite, orthopyroxene, clinopyroxene, zircon and matrix glass from the Bishop Tuff and two GM lavas are presented to investigate the pre-eruptive stratification of the Bishop magma chamber and its chemical relationship to the GM system. Analyses of samples from the entire Bishop stratigraphy confirm that the magma chamber was thermally and compositionally zoned prior to growth of crystals and the intrusion of the „bright-rim‟ forming magma. Study of rare mixed swirly and dacitic pumice samples shows enrichments in Ba, Sr and Ti (the elements responsible for bright-rim overgrowths in phenocryst phases) and identifies these pumices as possible representatives of the „bright-rim‟ magma. This integrated study of phenocrysts and glass from the Bishop Tuff leads to development of a revised magma chamber model, in which there is a unitary chamber with a stepped or sloping roof. The chamber has an upper, volumetrically dominant (~2/3) part showing no evidence for convection and with unzoned crystals, and a lower part which had experienced mixing of crystals and interaction with the „bright-rim‟ magma. Intrusion of the „bright-rim‟ magma introduced orthopyroxene and dominantly bright zircon crystals, and caused overgrowth of bright rims enriched in Ti, Sr and Ba on sanidine and quartz phenocrysts. Chemical compositions of GM and Bishop Tuff materials show a shared consanguinity, implying common modes of magma generation, yet the generation of GM and Bishop eruptible magma bodies were physically and temporally separate events.</p>


2017 ◽  
Author(s):  
Adam Nordling ◽  
◽  
Elizabeth McTaggart ◽  
Elizabeth A. Johnson ◽  
Madison L. Myers ◽  
...  
Keyword(s):  

2017 ◽  
Author(s):  
Antonio M. Bird ◽  
◽  
Katherine A. Kelker ◽  
Elizabeth S. Brogden ◽  
Jeff Glazner ◽  
...  

1989 ◽  
Vol 36 (4) ◽  
pp. 241-255 ◽  
Author(s):  
Timothy P. Flood ◽  
Benjamin C. Schuraytz ◽  
Thomas A. Vogel
Keyword(s):  

2021 ◽  
Author(s):  
J Johnson ◽  
S Prejean ◽  
Martha Savage ◽  
John Townend

We use shear wave splitting (SWS) analysis and double-difference relocation to examine temporal variations in seismic properties prior to and accompanying magmatic activity associated with the 2008 eruption of Okmok volcano, Alaska. Using bispectrum cross-correlation, a multiplet of 25 earthquakes is identified spanning five years leading up to the eruption, each event having first motions compatible with a normal fault striking NE-SW. Cross-correlation differential times are used to relocate earthquakes occurring between January 2003 and February 2009. The bulk of the seismicity prior to the onset of the eruption on 12 July 2008 occurred southwest of the caldera beneath a geothermal field. Earthquakes associated with the onset of the eruption occurred beneath the northern portion of the caldera and started as deep as 13 km. Subsequent earthquakes occurred predominantly at 3 km depth, coinciding with the depth at which the magma body has been modeled using geodetic data. Automated SWS analysis of the Okmok catalog reveals radial polarization outside the caldera and a northwest-southeast polarization within. We interpret these polarizations in terms of a magma reservoir near the center of the caldera, which we model with a Mogi point source. SWS analysis using the same input processing parameters for each event in the multiplet reveals no temporal changes in anisotropy over the duration of the multiplet, suggesting either a short-term or small increase in stress just before the eruption that was not detected by GPS, or eruption triggering by a mechanism other than a change of stress in the system. © 2010 by the American Geophysical Union.


Sign in / Sign up

Export Citation Format

Share Document