Comparison of Nasoseptal Cartilage Graft Versus Titanium Mesh in Reconstruction of Pure Orbital Blowout Fractures

2021 ◽  
Vol Publish Ahead of Print ◽  
Author(s):  
Mehmet Serhat Mangan ◽  
Ayse Enise Goker ◽  
Serap Yurttaser Ocak ◽  
Yavuz Uyar
2017 ◽  
Vol 10 (1) ◽  
pp. 77-83 ◽  
Author(s):  
Geraldine Hwee Ping Lee ◽  
Samuel Yew Ming Ho

Orbital blowout fractures are a common occurrence following orbital trauma. Depending on the size of the defect and the contents that have herniated or incarcerated, possible sequelae include enophthalmos, diplopia, dystopia, and entrapment. Surgical intervention aims to prevent or alleviate this through the use of a bone graft or an alloplastic implant to reconstitute the continuity of the orbit. However, in doing so, the implant itself may result in the unexpected adherence of the periorbita, resulting in orbital adherence syndrome. We present two cases of orbital adherence syndrome following the use of titanium mesh for orbital floor reconstruction. In both cases, we also delineate the management of this syndrome. Our first patient reported good recovery after surgical intervention to relieve the tethering to the titanium mesh and subsequent placement of a smooth interface implant. The other patient was managed nonsurgically with resolution of symptoms. We highlight possible signs that might suggest the need for early surgical intervention. Orbital adherence syndrome is a poorly described and understood phenomenon and appears to occur after the use of large-pored titanium mesh for orbital reconstruction. Prevention is possible through careful patient selection and the placement of a smooth interface medium in the initial surgery.


Skull Base ◽  
2007 ◽  
Vol 17 (S 1) ◽  
Author(s):  
Martin Blaha ◽  
Michal Tichy ◽  
Juraj Schwab ◽  
Lubomír Pekař ◽  
Jiří Kozák

2019 ◽  
Vol 9 (1) ◽  
pp. 37-40
Author(s):  
Sonali Uttamrao Landge ◽  
◽  
Prafful V Jatale ◽  
Vilas Kirdak ◽  
Sambhaji Chintale ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yuhang Wang ◽  
Yi Zhan ◽  
Huiming Yang ◽  
Hua Guo ◽  
Haiping Zhang ◽  
...  

AbstractFusion with a titanium mesh cage (TMC) has become popular as a conventional method after cervical anterior corpectomy, but postoperative TMC subsidence has often been reported in the literature. We designed a novel anatomic cervical TMC to reduce the postoperative subsidence rate. According to the test process specified in the American Society of Testing Materials (ASTM) F2267 standard, three-dimensional finite element analysis was used to compare the anti-subsidence characteristics of a traditional TMC (TTMC) and novel TMC (NTMC). Through analysis, the relative propensity values of a device to subside (Kp) of the TTMC and NTMC were 665.5 N/mm and 1007.2 N/mm, respectively. A higher Kp measurement is generally expected to indicate that the device is more resistant to subsidence into a vertebral body. The results showed that the novel anatomic titanium mesh cage (NTMC) significantly improved the anti-subsidence performance after anterior cervical corpectomy and fusion (ACCF), which was approximately 51.3% higher than that of the traditional titanium mesh cage.


Sign in / Sign up

Export Citation Format

Share Document