scholarly journals Development of honeybee waggle dance and its differences between recruits and scouts

2017 ◽  
Author(s):  
Hiroyuki Ai ◽  
Yuuki Kobayashi ◽  
Toshiyuki Matake ◽  
Shinya Takahashi ◽  
Koji Hashimoto ◽  
...  

AbstractThe lifetime development of the waggle dance of 14 honeybees was automatically recorded just after the imaginal molt using high-definition camera modules connected with a Raspberry Pi computer and numbered radio-frequency identification tags fitted to the back of each bee. For most honeybees, waggle dance follow preceded the appearance of the first waggle dance from 1 week after the imaginal molt. The duration per trip increased just after waggle dance follow. Before the appearance of the first waggle dance, the honeybee repeatedly follows waggle dances that indicate a limited number (2–6) of food source locations. We discriminated between two types of foragers with different roles, recruits and novice scouts, by comparing the vectors indicated by the bees’ first waggle dance (sending vectors) with dances they had previously followed (received vectors). Of 14 tagged honeybees, 11 were categorized as recruits and 2 as novice scouts. For recruits (but not for novice scouts), the duration per trip increased significantly after waggle dances follow and substantially increased just before the appearance of the first waggle dance. Moreover, recruits increased the number of times they followed waggle dances indicating the same location, and their first waggle dance indicated this location. These results suggest that the differentiation of these two types of foragers is partly related to behavioral differences after waggle dance follows: whether trip is activated or not by follows a waggle dance.Summary statementBecause of technological difficulties, there are no studies comparing the development of recruit and scout waggle dances. Using miniature radio frequency identification tags, we observed and clarified these developmental processes.List of AbbreviationsANantennaRFIDradio frequency identification.

2018 ◽  
Vol 89 (4) ◽  
pp. 560-571 ◽  
Author(s):  
Xiaochen Chen ◽  
Leena Ukkonen ◽  
Johanna Virkki

Passive radio frequency identification-based technology is a convincing approach to the achievement of versatile energy- and cost-efficient wireless platforms for future wearable applications. By using two-part antenna structures, the antenna-electronics interconnections can remain non-stressed, which can significantly improve the reliability of the textile-embedded wireless components. In this article, we describe fabrication of two-part stretchable and non-stretchable passive ultra-high frequency radio frequency identification textile tags using electro-textile and embroidered antennas, and test their reliability when immersed as well as under cyclic strain. The results are compared to tags with traditional one-part dipole antennas fabricated from electro-textiles and by embroidery. Based on the results achieved, the initial read ranges of the two-part antenna tags, around 5 m, were only slightly shorter than those of the one-part antenna tags. In addition, the tag with two-part antennas can maintain high performance in a moist environment and during continuous stretching, unlike the one-part antenna tag where the antenna-integrated circuit attachment is under stress.


In Vivo ◽  
2019 ◽  
Vol 34 (1) ◽  
pp. 233-238 ◽  
Author(s):  
UMAR WAZIR ◽  
SALIM TAYEH ◽  
NICHOLAS PERRY ◽  
MICHAEL MICHELL ◽  
ANMOL MALHOTRA ◽  
...  

2019 ◽  
Vol 18 (12) ◽  
pp. 2642-2646
Author(s):  
Weikang Chen ◽  
Zhenyi Niu ◽  
Mengyuan Li ◽  
Zhuo Li ◽  
Qian Xu ◽  
...  

Author(s):  
Alex K. Jones ◽  
Swapna Dontharaju ◽  
Shenchih Tung ◽  
Peter J. Hawrylak ◽  
Leonid Mats ◽  
...  

2016 ◽  
Vol 29 (2) ◽  
pp. 236-247 ◽  
Author(s):  
Kaori Kusuda ◽  
Kazuhiko Yamashita ◽  
Akiko Ohnishi ◽  
Kiyohito Tanaka ◽  
Masaru Komino ◽  
...  

Purpose – To prevent malpractices, medical staff has adopted inventory time-outs and/or checklists. Accurate inventory and maintenance of surgical instruments decreases the risk of operating room miscounting and malfunction. In our previous study, an individual management of surgical instruments was accomplished using Radio Frequency Identification (RFID) tags. The purpose of this paper is to evaluate a new management method of RFID-tagged instruments. Design/methodology/approach – The management system of RFID-tagged surgical instruments was used for 27 months in clinical areas. In total, 13 study participants assembled surgical trays in the central sterile supply department. Findings – While using the management system, trays were assembled 94 times. During this period, no assembly errors occurred. An instrument malfunction had occurred after the 19th, 56th, and 73th uses, no malfunction caused by the RFID tags, and usage history had been recorded. Additionally, the time it took to assemble surgical trays was recorded, and the long-term usability of the management system was evaluated. Originality/value – The system could record the number of uses and the defective history of each surgical instrument. In addition, the history of the frequency of instruments being transferred from one tray to another was recorded. The results suggest that our system can be used to manage instruments safely. Additionally, the management system was acquired of the learning effect and the usability on daily maintenance. This finding suggests that the management system examined here ensures surgical instrument and tray assembly quality.


2010 ◽  
Vol 99 (5) ◽  
pp. 680-687
Author(s):  
Kazuyuki Mori ◽  
Zhaowu Meng ◽  
Hirosumi Kikuchi ◽  
Yasuhide Kataoka ◽  
Kazuhisa Nakazato ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document