Application of Pulsating Vacuum Cleaning Technology to Medical Devices Cleaning

This study aims to solve existing problems in cleaning medical devices, such as the cumbersome loading of minimally invasive surgical instruments, the incomplete cleaning of instruments with complex structures, and the low cleaning efficiency of ordinary instruments. A pulsating vacuum cleaning machine was combined with ultrasonic cleaning and boiling cleaning technology to clean various complex medical devices through a pressure pulsating process (i.e., repetitive pump-out and pumpin until the cleaning results meet the cleaning standards for medical devices). The cleaning results of spay washing, ultrasound cleaning and pulsating vacuum cleaning were compared among four groups of medical devices, including silica gel hoses, chamber instruments, whole box of minimally invasive instruments and surgical instruments. The amount of protein residues was tested using the spectrophotometric method. The testing results revealed that the loading capacity of a pulsating vacuum cleaning machine is 3–4 times as much as that of an ordinary spray cleaning machine, without manual placement and connection operation required, which reduced the workload of pretreatment. The protein residue after cleaning meets the requirements of the YY/T0734 standard for the cleaning effect of medical devices. Pulsating vacuum cleaning technology has an overall better loading capacity, when compared to spay washing and ultrasound cleaning, and this can make up for the shortcomings of commonly used cleaning machines, such as the low cleaning efficiency and unsatisfactory cleaning results of medical devices with complex structures.

Tactile Sensing for Minimally Invasive Surgery: Conventional Methods and Potential Emerging Tactile Technologies

As opposed to open surgery procedures, minimally invasive surgery (MIS) utilizes small skin incisions to insert a camera and surgical instruments. MIS has numerous advantages such as reduced postoperative pain, shorter hospital stay, faster recovery time, and reduced learning curve for surgical trainees. MIS comprises surgical approaches, including laparoscopic surgery, endoscopic surgery, and robotic-assisted surgery. Despite the advantages that MIS provides to patients and surgeons, it remains limited by the lost sense of touch due to the indirect contact with tissues under operation, especially in robotic-assisted surgery. Surgeons, without haptic feedback, could unintentionally apply excessive forces that may cause tissue damage. Therefore, incorporating tactile sensation into MIS tools has become an interesting research topic. Designing, fabricating, and integrating force sensors onto different locations on the surgical tools are currently under development by several companies and research groups. In this context, electrical force sensing modality, including piezoelectric, resistive, and capacitive sensors, is the most conventionally considered approach to measure the grasping force, manipulation force, torque, and tissue compliance. For instance, piezoelectric sensors exhibit high sensitivity and accuracy, but the drawbacks of thermal sensitivity and the inability to detect static loads constrain their adoption in MIS tools. Optical-based tactile sensing is another conventional approach that facilitates electrically passive force sensing compatible with magnetic resonance imaging. Estimations of applied loadings are calculated from the induced changes in the intensity, wavelength, or phase of light transmitted through optical fibers. Nonetheless, new emerging technologies are also evoking a high potential of contributions to the field of smart surgical tools. The recent development of flexible, highly sensitive tactile microfluidic-based sensors has become an emerging field in tactile sensing, which contributed to wearable electronics and smart-skin applications. Another emerging technology is imaging-based tactile sensing that achieved superior multi-axial force measurements by implementing image sensors with high pixel densities and frame rates to track visual changes on a sensing surface. This article aims to review the literature on MIS tactile sensing technologies in terms of working principles, design requirements, and specifications. Moreover, this work highlights and discusses the promising potential of a few emerging technologies towards establishing low-cost, high-performance MIS force sensing.

The direct anterior approach to the hip: a useful tool in experienced hands or just another approach?

The direct anterior approach (DAA) to the hip was initially described in the nineteenth century and has been used sporadically for total hip arthroplasty (THA). However, recent increased interest in tissue-sparing and small incision arthroplasty has given rise to a sharp increase in the utilization of the DAA. Although some previous studies claimed that this approach results in less muscle damage and pain as well as rapid recovery, a paucity in the literature exists to conclusively support these claims. While the DAA may be comparable to other THA approaches, no evidence to date shows improved long-term outcomes for patients compared to other surgical approaches for THA. However, the advent of new surgical instruments and tables designed specifically for use with the DAA has made the approach more feasible for surgeons. In addition, the capacity to utilize fluoroscopy intraoperatively for component positioning is a valuable asset to the approach and can be of particular benefit for surgeons during their learning curve. An understanding of its limitations and challenges is vital for the safe employment of this technique. This review summarizes the pearls and pitfalls of the DAA for THA in order to improve the understanding of this surgical technique for hip replacement surgeons.

Reducing the Environmental Impact of Sterilization Packaging for Surgical Instruments in the Operating Room: A Comparative Life Cycle Assessment of Disposable versus Reusable Systems

The widespread use of single-use polypropylene packaging for sterilization of surgical instruments (blue wrap) results in enormous environmental pollution and plastic waste, estimated at 115 million kilograms on a yearly basis in the United States alone. Rigid sterilization containers (RSCs) are a well-known alternative in terms of quality and price. This paper deals with two research questions investigating the following aspects: (A) the environmental advantage of RCS for high volumes (5000 use cycles) in big hospitals, and (B) the environmental break-even point of use-cycles for small hospitals. An in-depth life cycle assessment was used to benchmark the two systems. As such a benchmark is influenced by the indicator system, three indicator systems were applied: (a) carbon footprint, (b) ReCiPe, and (c) eco-costs. The results are as follows: (1) the analyzed RSC has 85% less environmental impact in carbon footprint, 52% in ReCiPe, and 84.5% in eco-costs; and (2) an ecological advantage already occurs after 98, 228, and 67 out of 5000 use cycles, respectively. Given these two alternative packaging systems with comparable costs and quality, our results show that there are potentially large environmental gains to be made when RSC is preferred to blue wrap as a packaging system for sterile surgical instruments on a global scale.