scholarly journals Rotation sensing with improved stability using point-source atom interferometry

2020 ◽  
Vol 102 (1) ◽  
Author(s):  
Chen Avinadav ◽  
Dimitry Yankelev ◽  
Moshe Shuker ◽  
Ofer Firstenberg ◽  
Nir Davidson
2016 ◽  
Vol 109 (7) ◽  
pp. 071113 ◽  
Author(s):  
Gregory W. Hoth ◽  
Bruno Pelle ◽  
Stefan Riedl ◽  
John Kitching ◽  
Elizabeth A. Donley

2013 ◽  
Vol 111 (8) ◽  
Author(s):  
Susannah M. Dickerson ◽  
Jason M. Hogan ◽  
Alex Sugarbaker ◽  
David M. S. Johnson ◽  
Mark A. Kasevich

2020 ◽  
Vol 28 (23) ◽  
pp. 34516
Author(s):  
Yun-Jhih Chen ◽  
Azure Hansen ◽  
Moshe Shuker ◽  
Rodolphe Boudot ◽  
John Kitching ◽  
...  

Atoms ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 51
Author(s):  
Jinyang Li ◽  
Gregório R. M. da Silva ◽  
Wayne C. Huang ◽  
Mohamed Fouda ◽  
Jason Bonacum ◽  
...  

A point source interferometer (PSI) is a device where atoms are split and recombined by applying a temporal sequence of Raman pulses during the expansion of a cloud of cold atoms behaving approximately as a point source. The PSI can work as a sensitive multi-axes gyroscope that can automatically filter out the signal from accelerations. The phase shift arising from the rotations is proportional to the momentum transferred to each atom from the Raman pulses. Therefore, by increasing the momentum transfer, it should be possible to enhance the sensitivity of the PSI. Here, we investigate the degree of enhancement in sensitivity that could be achieved by augmenting the PSI with large momentum transfer (LMT) employing a sequence of many Raman pulses with alternating directions. We analyze how factors such as Doppler detuning, spontaneous emission, and the finite initial size of the atomic cloud compromise the advantage of LMT and how to find the optimal momentum transfer under these limitations, with both the semi-classical model and a model under which the motion of the center of mass of each atom is described quantum mechanically. We identify a set of realistic parameters for which LMT can improve the PSI by a factor of nearly 40.


Author(s):  
Yun-Jhih Chen ◽  
Azure Hansen ◽  
Moshe Shuker ◽  
Rodolphe Boudot ◽  
John Kitching ◽  
...  

Author(s):  
D. A. Carpenter ◽  
Ning Gao ◽  
G. J. Havrilla

A monolithic, polycapillary, x-ray optic was adapted to a laboratory-based x-ray microprobe to evaluate the potential of the optic for x-ray micro fluorescence analysis. The polycapillary was capable of collecting x-rays over a 6 degree angle from a point source and focusing them to a spot approximately 40 µm diameter. The high intensities expected from this capillary should be useful for determining and mapping minor to trace elements in materials. Fig. 1 shows a sketch of the capillary with important dimensions.The microprobe had previously been used with straight and with tapered monocapillaries. Alignment of the monocapillaries with the focal spot was accomplished by electromagnetically scanning the focal spot over the beveled anode. With the polycapillary it was also necessary to manually adjust the distance between the focal spot and the polycapillary.The focal distance and focal spot diameter of the polycapillary were determined from a series of edge scans.


Sign in / Sign up

Export Citation Format

Share Document