Design of a multifrequency slotted circular patch antenna for wireless communication and effect of substrate on the antenna performance

2018 ◽  
Author(s):  
Anurima Majumdar ◽  
Antara Ghosal ◽  
Debasish Das
Keyword(s):  
Wireless Communication ◽  
Patch Antenna ◽  
Circular Patch ◽  
Antenna Performance ◽  
Circular Patch Antenna

scholarly journals Circular Patch Antenna Design for Data Centric Cognitive Radio based Networks

2021 ◽  
Vol 2 (3) ◽  
pp. 123-127
Author(s):  
Vivekanadam B
Keyword(s):  
Cognitive Radio ◽  
Wireless Communication ◽  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Antenna Design ◽  
Design Parameters ◽  
Mobile Service ◽  
Circular Patch ◽  
Circular Patch Antenna

Inefficient utilization of licensed spectrum bands and overcrowding of unlicensed bands are caused due to the spectrum shortage and growing demand for wireless communication. The wireless spectrum is burdened due to the host centric traditional approaches for data detection and recovery in the IP-based networks that. The service or data is retrieved from the service provider through a new routing path every time the mobile service requester initiates a request. The vacant licensed channels are utilized appropriately enabling opportunistic and efficient band usage of the spectrum using Cognitive Radio (CR) technology. Wireless communication with low cost, compact antenna element, high gain, wideband and low profile can be performed using patch antenna. Patch is a significant aspect of antenna design. The antenna design parameters are understood by varying the patch. A good return loss can be achieved by enhancing the radiation pattern on changing the patch dimensions. High Frequency Structure Simulator (HFSS) is used for simulation and analysis of the circular patch antenna. The return loss, radiation efficiency, Voltage Standing Wave Ratio (VSWR) and radiation pattern of the antenna are analyzed.

scholarly journals Design and Analysis of Dual-Band Circular Patch Antenna for X-Band Applications with Enhanced Bandwidth

2021 ◽  
pp. 86-90
Author(s):  
Pendli Pradeep ◽  
S. K. Satyanarayana
Keyword(s):  
Wireless Communication ◽  
Patch Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Ground Plane ◽  
Wave Impedance ◽  
Dual Band ◽  
Antenna Structure ◽  
Circular Patch ◽  
Circular Patch Antenna

An antenna is a crucial component in the wireless communication system which converts electrical waves to EM waves and vice-versa which leads to revaluation in wireless communication technology. Due to this reason the experiment was performed on a simple circular patch antenna for better radiation along with wide transmission bandwidth. In this paper, a simple circular microstrip antenna structure is designed to operate at dual bands. The proposed antenna consists of a circular radiating patch, a 50-ohm feedline line, a quarter-wave impedance matching transmission line, and a ground plane. It meets significant requirements for large bandwidth, optimized gain, minimum reflections, and small size with high directivity and efficiency. This antenna contains FR4 Epoxy substrate material with permittivity 4.4 and size 36mm x 36mm x 1.67mm. ANSOFT HFSS simulator is used to analyze various parameters like return loss, VSWR, Impedance, and gain. The Resonant Frequency of the designed antenna is 8.77 GHz and 10.6 GHz. with minimum Return Loss of -52 dB and -21.66 dB respectively. It was also observed that 1.005 and 1.2 VSWR at 8.77 GHz and 10.6 GHz respectively.

Sign in / Sign up

Export Citation Format

Share Document