Compressed Sampling and Reconstruction Method of Transient Power Quality Signal

Author(s):  
Wenjun Cao ◽  
Wei Xi ◽  
Hao Yao ◽  
Wei Chen
2014 ◽  
Vol 700 ◽  
pp. 99-102
Author(s):  
Meng Da Li ◽  
Yu Bo Duan ◽  
Yan Wang

This paper uses the method of S transformation to test the starting time, the end of the time, frequency and amplitude characteristics of common transient power quality signal disturbance. Through error analysis and simulation show that this method can accurately determine the disturbance occurred time and duration, and the identification and determination of disturbance can be simple and intuitive. It has the practical value and realistic significance to power quality signal interference analysis.


2012 ◽  
Vol 16 ◽  
pp. 1380-1385 ◽  
Author(s):  
Chen Chunling ◽  
Qi Huihui ◽  
Zheng Wei ◽  
Wu Pengfei

2013 ◽  
Vol 655-657 ◽  
pp. 974-977
Author(s):  
Han Sheng Yang

In power quality monitoring system, there are unavoidably existing various kinds of noises in collected data,the presence of noise may result in increased false classification rate, denoising is an extremely important work for detection and classification of power quality disturbances. In order to improve the denoising result of power quality signal, an denoising method for power quality signal using Savitzky-Golay is proposed. Numerical results show that the proposed method can eliminate the influence of noise components and implement transient power quality disturbance detection and localization, thus providing good foundations for transient power quality disturbance monitoring under noise environment.


2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Ming Yin ◽  
Kai Yu ◽  
Zhi Wang

For low-power wireless systems, transmission data volume is a key property, which influences the energy cost and time delay of transmission. In this paper, we introduce compressive sensing to propose a compressed sampling and collaborative reconstruction framework, which enables real-time direction of arrival estimation for wireless sensor array network. In sampling part, random compressed sampling and 1-bit sampling are utilized to reduce sample data volume while making little extra requirement for hardware. In reconstruction part, collaborative reconstruction method is proposed by exploiting similar sparsity structure of acoustic signal from nodes in the same array. Simulation results show that proposed framework can reach similar performances as conventional DoA methods while requiring less than 15% of transmission bandwidth. Also the proposed framework is compared with some data compression algorithms. While simulation results show framework’s superior performance, field experiment data from a prototype system is presented to validate the results.


Author(s):  
Liu Yang ◽  
Qinyue Tan ◽  
Di Xiong ◽  
Zhengguang Liu

The overrun of transient power quality index caused by the large-capacity electric arc furnace (EAF) has become a prominent problem affecting the safe and stable operation of the power system. (1) In this paper, the relationship between arc furnace volt-age and current is derived based on the different stages of arc combustion, and the random variation of chaotic phenomenon of the arc voltage are simulated. Established an EAF model suitable for the study of transient power quality problems. (2) Take 50t AC EAF as an example to analyze the reactive power impact and the influence on the point of common coupling (PCC) voltage caused by the three-phase short circuit of the electrode. The results show that the experimental results are consistent with the theoretical analysis, verifying the correctness and effectiveness of the model. (3) When the three-phase short-circuit occurs, the reactive power impact is nearly 6 times that of normal operation, the short-circuit current is 2.66 times that of normal operation, and the effective value of the PCC voltage has dropped by 40.37%, which provides a theoretical basis for real-time compensation of impulsive reactive power and improvement of the transient power quality of the EAF.


2021 ◽  
Author(s):  
Tianying Chen ◽  
Yuhao Zhao ◽  
Tiecheng Li ◽  
Peng Luo ◽  
Yangjun Hou ◽  
...  

Author(s):  
Panos Markopoulos ◽  
Vassilis-Javed Khan

The Experience Sampling and Reconstruction Method (ESRM) is a research method suitable for user studies conducted in situ that is needed for the design and evaluation of ambient intelligence technologies. ESRM is a diary method supported by a distributed application, Reconexp, which runs on a mobile device and a website, enabling surveying user attitudes, experiences, and requirements in field studies. ESRM combines aspects of the Experience Sampling Method and the Day Reconstruction Method aiming to reduce data loss, improve data quality, and reduce burden put upon participants. The authors present a case study of using this method in the context of a study of communication needs of working parents with young children. Requirements for future developments of the tool and the method are discussed.


Sign in / Sign up

Export Citation Format

Share Document