Application of Fuzzy Logic Controller with Self-Tuning PID Parameters for Contral System of 40kg Coke Oven

Author(s):  
Qingsi Zhang ◽  
Jinfeng Bai
Author(s):  
M.Z. Ismail ◽  
M.H.N. Talib ◽  
Z. Ibrahim ◽  
J. Mat Lazi ◽  
Z. Rasin

<span>Fuzzy logic controller (FLC) has shown excellent performance in dealing with the non-linearity and complex dynamic model of the induction motor. However, a conventional constant parameter FLC (CPFL) will not be able to provide–good coverage performance for a wide speed range operation with a single tuning parameter. Therefore, this paper proposed a self tuning mechanism FLC approach by model reference adaptive controller (ST-MRAC) to continuously allow to adjust the parameters. Due to real time hardware application, the dominant rules selection method for simplified rules has been implemented as part of the reducing computational burden. Experiment results validate a good performance of the ST-MRAC compared to the CPFL for the   speed performance in terms of the wide range of operations and disturbance showed remarkable performance.</span>


Author(s):  
P. J. Ragu

In this paper, temperature monitoring of sterilizing equipment system was established with the help of fuzzy and self tuning Adaptive fuzzy logic controller designed in Lab VIEW software. It combines the advantages of both fuzzy logic and self tuning Adaptive fuzzy logic controller. The implementation attempts to rectify the errors between the measured value and the set point which helps to achieve efficient temperature control. The Adaptive fuzzy controller uses defined rules to control the system based on the current values of input variables and temperature errors. The simulation results presented in order to evaluate the proposed method. The result shows that self tuning  Adaptive fuzzy logic controller was tolerant to disturbance and the temperature control is most accurate.


2014 ◽  
Vol 333 (21) ◽  
pp. 5244-5268 ◽  
Author(s):  
Nemanja D. Zorić ◽  
Aleksandar M. Simonović ◽  
Zoran S. Mitrović ◽  
Slobodan N. Stupar ◽  
Aleksandar M. Obradović ◽  
...  

Author(s):  
Nabil Farah ◽  
M. H. N. Talib ◽  
Z. Ibrahim ◽  
J. M. Lazi ◽  
Maaspaliza Azri

<span>Fuzzy logic controller has been the main focus for many researchers and industries in motor drives. The popularity of Fuzzy Logic Controller (FLC) is due to its reliability and ability to handle parameters changes during load or disturbance. Fuzzy logic design can be visualized in two categories, mamdani design or Takagi-Sugeno (TS). Mamdani type can facilitate the design process, however it require high computational burden especially with big number of rules and experimental testing. This paper, develop Self-Tuning (ST) mechanism based on Takagi-Sugeno (TS) fuzzy type. The mechanism tunes the input scaling factor of speed fuzzy control of Induction Motor (IM) drives Based on the speed error and changes of error. A comparison study is done between the standard TS and the ST-TS based on simulations approaches considering different speed operations. Speed response characteristics such as rise time, overshoot, and settling time are compared for ST-TS and TS. It was shown that ST-TS has optimum results compared to the standard TS. The significance of the proposed method is that, optimum computational burden reduction is achieved.</span>


1993 ◽  
Vol 6 (2) ◽  
pp. 119-131 ◽  
Author(s):  
J.A. Meech ◽  
L.A. Jordon

Sign in / Sign up

Export Citation Format

Share Document