Determination of the maximum power point in a photovoltaic panel using Kalman Filter on the environment PSIM

Author(s):  
Ayoub Aoune ◽  
Saad Motahhir ◽  
Abdelaziz El Ghzizal ◽  
Souad Sebti ◽  
Aziz Derouich
Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 483
Author(s):  
Novie Ayub Windarko ◽  
Muhammad Nizar Habibi ◽  
Bambang Sumantri ◽  
Eka Prasetyono ◽  
Moh. Zaenal Efendi ◽  
...  

During its operation, a photovoltaic system may encounter many practical issues such as receiving uniform or non-uniform irradiance caused mainly by partial shading. Under uniform irradiance a photovoltaic panel has a single maximum power point. Conversely under non-uniform irradiance, a photovoltaic panel has several local maximum power points and a single global maximum power point. To maximize energy production, a maximum power point tracker algorithm is commonly implemented to achieve the maximum power operating point of the photovoltaic panel. However, the performance of the algorithm will depend on operating conditions such as variation in irradiance. Presently, most of existing maximum power point tracker algorithms work only in a single condition: either uniform or non-uniform irradiance. This paper proposes a new maximum power point tracker algorithm for photovoltaic power generation that is designed to work under uniform and partial shading irradiance conditions. Additionally, the proposed maximum power point tracker algorithm aims to provide: (1) a simple math algorithm to reduce computational load, (2) fast tracking by evaluating progress for every single executed duty cycle, (3) without random steps to prevent jumping duty cycle, and (4) smooth variable steps to increase accuracy. The performances of the proposed algorithm are evaluated by three conditions of uniform and partial shading irradiance where a targeted maximum power point is located: (1) far from, (2) near, and (3) laid between initial positions of particles. The simulation shows that the proposed algorithm successfully tracks the maximum power point by resulting in similar power values in those three conditions. The proposed algorithm could handle the partial shading condition by avoiding the local maxima power point and finding the global maxima power point. Comparisons of the proposed algorithm and other well-known algorithms such as differential evolution, firefly, particle swarm optimization, and grey wolf optimization are provided to show the superiority of the proposed algorithm. The results show the proposed algorithm has better performance by providing faster tracking, faster settling time, higher accuracy, minimum oscillation and jumping duty cycle, and higher energy harvesting.


2014 ◽  
Vol 21 (4) ◽  
pp. 733-740 ◽  
Author(s):  
Janusz Mroczka ◽  
Mariusz Ostrowski

Abstract Photovoltaic panels have a non-linear current-voltage characteristics to produce the maximum power at only one point called the maximum power point. In the case of the uniform illumination a single solar panel shows only one maximum power, which is also the global maximum power point. In the case an irregularly illuminated photovoltaic panel many local maxima on the power-voltage curve can be observed and only one of them is the global maximum. The proposed algorithm detects whether a solar panel is in the uniform insolation conditions. Then an appropriate strategy of tracking the maximum power point is taken using a decision algorithm. The proposed method is simulated in the environment created by the authors, which allows to stimulate photovoltaic panels in real conditions of lighting, temperature and shading.


Author(s):  
Vahid Jafari Fesharaki ◽  
Farid Sheikholeslam ◽  
Mohammad Reza Jahed Motlagh

AbstractBecause of nonlinear I-V curves of photovoltaic panels, a maximum power point tracking (MPPT) technique is necessary to absorb maximum power. In this article state-space averaging method is utilized to express behavior of boost chopper converter. To generate the best operating point (PV panel desired voltage), incremental conductance is used. A Robust feedback linearization controller is proposed to deliver the PV panel to maximum power point. The controller is robust to environment variations, load uncertainties and load voltage disturbances. Stability of proposed controller is proved based on Lyapunov theorem. A boost chopper is used between PV panel and load to realize proposed MPPT technique. Boost chopper parameters are designed properly to operate converter in continues conduction mode (CCM). To evaluate MPPT technique some simulations in irradiance variation, temperature variation, load variation and load voltage disturbance are presented and discussed.


Author(s):  
Piotr Kozierski ◽  
Adam Owczarkowski ◽  
Marcin Lis ◽  
Dariusz Horla

Perturbation and Observe method for maximum power point tracking is presented in this paper. Three method modifications have been proposed, which allow satisfying tracking efficiency, even for very fast and noisy irradiance changes.


2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Lhoussain El Bahir ◽  
Touria Hassboun

An accurate method is proposed to track the maximum power point of a photovoltaic module. The method is based on the analytical value of the maximum power point voltage, determined from a mathematical model of the photovoltaic panel. The method has the advantage of accuracy without any oscillations, as with certain conventional methods. The algorithm has also the ability to track accurately the maximum power point under variable atmospheric conditions and load changes. Experimental results are presented to show the effectiveness of the method. The implementation of the method needs an online measurement of irradiance, panel temperature, and panel current and voltage.


Sign in / Sign up

Export Citation Format

Share Document