Analysis of MISO Converter with Intelligent Control for Solar Water Pumping

Many parts of the western US is rural in nature and consequently do not have electrical distribution lines in many parts of farms and ranches. Distribution line extension costs can run from $15,000 to $25,000 per mile, thereby making availability of electricity to small water pumping projects economically unattractive. Solar photo-voltaic (PV) powered water pumping is more cost effective in these small scale applications. Many western states including Wyoming are passing through fifth year of drought with the consequent shortages of water for many applications. Wyoming State Climatologist is predicting a possible 5–10 years of drought. Drought impacts the surface water right away, while it takes much longer to impact the underground aquifers. To mitigate the effect on the livestock and wildlife, Wyoming Governor Dave Freudenthal initiated a solar water pumping initiative in cooperation with the University of Wyoming, County Conservation Districts, Rural Electric Cooperatives, and ranching organizations. Solar water pumping has several advantages over traditional systems; for example, diesel or propane engines require not only expensive fuels, they also create noise and air pollution in many remote pristine areas. Solar systems are environment friendly, low maintenance and have no fuel cost. In this paper the design, installation and performance monitoring of the solar system for small scale remote water pumping will be presented.

Download Full-text

Techno-economical study of solar water pumping system: optimum design, evaluation, and comparison

Renewable Energy and Environmental Sustainability ◽

10.1051/rees/2021039 ◽

2021 ◽

Vol 6 ◽

pp. 41

Author(s):

Hussein A. Kazem ◽

Anas Quteishat ◽

Mahmoud A. Younis

Keyword(s):

Optimum Design ◽

Meteorological Data ◽

Average Energy ◽

Cost Evaluation ◽

Successful Operation ◽

Solar Water ◽

Water Pumping ◽

Cost Of Energy ◽

Simulation Results ◽

The Cost

Solar water pumping systems are fundamental entities for water transmission and storage purposes whether it is has been used in irrigation or residential applications. The use of photovoltaic (PV) panels to support the electrical requirements of these pumping systems has been executed globally for a long time. However, introducing optimization sizing techniques to such systems can benefit the end-user by saving money, energy, and time. This paper proposed solar water pumping systems optimum design for Oman. The design, and evaluation have been carried out through intuitive, and numerical methods. Based on hourly meteorological data, the simulation used both HOMER software and numerical method using MATLAB code to find the optimum design. The selected location ambient temperature variance from 12.8 °C to 44.5 °C over the year and maximum insolation is 7.45 kWh/m2/day, respectively. The simulation results found the average energy generated, annual yield factor, and a capacity factor of the proposed system is 2.9 kWh, 2016.66 kWh/kWp, and 22.97%, respectively, for a 0.81 kW water pump, which is encouraging compared with similar studied systems. The capital cost of the system is worth it, and the cost of energy has compared with other systems in the literature. The comparison shows the cost of energy to be in favor of the MATLAB simulation results with around 0.24 USD/kWh. The results show successful operation and performance parameters, along with cost evaluation, which proves that PV water pumping systems are promising in Oman.

Download Full-text